Irreplaceably Rare.. So I Must Restore! // V8 Celica

ThrottleStream
1 follower
2 Video Views·Jun 15, 2024
Quality Car Builds Don't happen Overnight!
Support This Channel❤️
⭐️Merch: https://shop.sarahntuned.com
Patreon: https://www.patreon.com/sarahntuned
Amazon Store: https://www.amazon.com/shop/sarah-n-tuned
Website: https://www.sarahntuned.com
Instagram: sarahntuned
Facebook: sarahntuned
X/Twitter: sarahntuned
Special Thanks to my Patreon Support!
Britt F.
Chad B.
Col. L.
Curtis S.
Daniel F.
Darren M.
Dave
David L.
Jeffrey P.
Josh H.
Kevin C.
Mark L.
Meghan "in Seattle"
Nenad R.
Ray I.
Terry S.
Todd C.
hello people of the world watching car
related stuff on the internet welcome to
this my 1974 ra21 Toyota Celica which
will soon be powered by this 4 cam 4.7 L
2z Toyota V8 if you're new and you like
to get caught up on the previous video
where I let the smoke out of the robots
internal organs and at least a 100 of
you in the comments let me know that you
had eaten
rattlesnake up above my head is either a
link to that video or also could be an
instructional booklet on how to
crossbreed poodles in AP possums
spoiler it makes
poops 99.9% of you fine human beings
watching this right now have a filter
incorporated into your brain that
prevents nonsense like that from coming
out your sound hole mine's broken so
getting back to work on the car where I
last left off lots of assembly of the
original
parts here's a little bit of Automotive
ASMR for you
that is it's so crisp sounding there's
no rattle no I almost forgot it can even
get better than that these are the
rubber bumpers genuine Toyota part and
just when you thought I couldn't get any
more geeky I'm using actual Japanese
grease how the hell this is not going to
be easy to install
this wait there's a hole ah there we go
perfect ASMR around too
oh that's even better I still got a lot
to assemble on this
door uhoh oh
no this is heavy to spare you all from
watching another wiring
video These are essentially unobtainable
so I don't want to screw this
up
uh yes my Toyota tool kit original
it's all the little autra mons like this
that go to a car that make the biggest
difference in the end result if you put
a lot of effort into making these look
new again some people will try to save
time by just going with aftermarket
reproduction trim pieces cuz they look
brand new again but they never fit as
good as the original stuff regardless of
where the car comes from whether it's
American European Japanese there is like
a wax adhesive on the back of the
stainless trim that I believe was
probably used to keep corrosion from
forming maybe underneath here or it's
just 50 years of Goo but I'll fill you
in my little secret bug and tar remover
in steel wo or red scotchbrite will
clean up stainless perfect gets all the
stuff off doesn't it looks like rust but
it's not it's like a adhesive old
residue and it comes right off with bug
and tar remover this car was repainted
at one point in time in its life factory
color but just redone and they didn't
take the trim off so there's overspray
on the very Ed edges right here that
needs to obviously be removed so it
doesn't make my paint job look like it
was half Bast I'm personally not a fan
of chrome but I am a fan of good quality
stainless steel to achieve a perfect
finish I start with 600 grit once it's
all cleaned up and I work my way up to
3,000 that will make it shiny but not a
mirror Corner lamps luckily mine are in
perfect condition which is really hard
to find I feel with how old these
are I definitely need new gasket the
lower gasket is still in good shape all
of this stuff needs gold Inc before I
can go back on the car these are metal
but I think this is plated it's not
actually stainless so I'm going to go
with a mild
Degreaser these lower gaskets for the
front marker lights are intact but they
are definitely dry before I even attempt
to clean them I'm going to soak them in
some aerospace protectant oh I can feel
them getting softer already usually it's
the other way around these ones are the
original ones that say Kyoto Japan
stamped into them and I think I can save
them saturate those Yep they're getting
softer these might be savable I don't
have gaskets for these so I got to make
them this is the original Factory grill
that came on this car note the St logo
there were a couple different Grill
styles that you could have on these but
I think it's more special to just have
the original one that came on the car
from when it was new this part I have to
be super careful cuz these are plastic
and I don't want them to break
oh man this is nerve-wracking I don't
want to put an oilbased lubricant on
here cuz then paint won't stick to it so
I'm going to use glass cleaner it's wet
that's all it
matters got it I didn't break it this
Center Peg is plastic this backing plate
and the clip are both metal so I don't
want to snap the little plastic part in
the middle because then I will
effectively ruin the thing I'm trying to
restore if I put a little bit of
pressure just enough to get a bigger
screwdriver under it bend the tab itself
s there we
go the center part of the grill and the
dragon comes off you can see those pegs
they're plastic they're part of the
grill and they're 50 years old so if I
PRI too hard that would snap the St
badge super small it's got to be like a
7
mm yep 7 m and they're not tight
obviously cuz it'll crack it's plastic
it has a weird kind of indentation but
it looks like it was made like like that
badge removed it's hard to tell what
color this is supposed to be cuz this
car was repainted at one point in time
in its life if you look at the vents
that go up by the windshield though you
can see that these are actually sprayed
like a gunmetal color which is the same
color as the factory Fender mirrors from
Japan and you can see that the St emblem
which is Black from the factory is quite
a bit different in contrast to the grill
and the decorative strip that goes in
the center of the grill is satin black
with the polish metal is it a
contrasting color what I'm about to
Embark upon is quite possibly the most
tedious task I've ever accomplished
honestly that could be said for the
entire car
itself woo look at that insane this is
astonishing just how durable this chrome
plating on a piece of plastic is I don't
think I could do this on a newer
vehicle's Chrome plastic it would just
scuff it and be ruined the fact that I
can clean the chrome plating with steel
wool means that it's durable more
durable than spray I know this is not
sponsored but I'm showing you what I'm
using because this stuff is like OE
quality just so you don't think I'm
putting random spray paint on
it it's like an oven you can't see me
but just know that I'm painting now that
this entire thing is nice and trim black
try some 2,000
grit there we go in case you wondering I
actually only let this trim black dry
for about 15 minutes is that hot out
there that it just bakes it while you're
spraying it t tedious tedious tedious
tedious tedious tedious have you ever
sanded four coats of spray paint off
with 2,000 grit sandpaper before if you
have then you're probably also
insane well that was an hour of my life
I can't get back but that literally
looks brand new again each one of these
little Chrome ribs is polished out in
3,000 grit and and then it's got the
fresh new trim black on the inside
there hello welcome to the second day in
this video you may be watching this
right now wondering when I'm going to
get to the point of starting this car
and to answer that question wow this
stuff is making a mess I don't want
corrosion but jeez this stuff is messy
ow that's not easy to do the back side
of this thing is all covered in that wax
sweet nice and tight seal I also decided
rather than put the old Fuel and brake
lines back on this car to put all brand
new stuff so I ordered all brand new
hard lines to make it all from scratch
do much waxed everywhere those trash
bags smells so good why why why did my
trash bags smell good since this is an
area that is inevitably going to get
dirt built up behind it this one's nasty
I got to clean this adding this chassis
wax underneath the trim will help
prevent any dirt that's trapped in there
over the years from mixing with moisture
from when you wash it or it rains into
becoming a breeding ground for mildew
rot and stinky
okay all the gold zinc Hardware is now
at the zinc platers to get freshly
redone in this matte clear coat which is
going to be the secret sauce for what is
about to commence
[Music]
I didn't bring my camera next door it's
like
175° over there cuz I don't have
HVAC it's clean now soap that thing in
wax and grease from over doesn't it look
like you're a POV shot of being a robot
and you're looking at your
feet someone laughed at that the vast
majority of people that restore these us
M cars when they do the smiley bumpers
or the bumperette deletes like I did
they delete these in favor of the
smaller JDM ones I however like the way
these look it almost looks like a fog
light cuz it's so large and I just I'm a
fan of Amber lights so how much money
would you give me to eat this thing I'm
not I'm not going to eat it unless it
was like a million dollars or something
then I'd be able to build a shop and I
could
retire which I probably won't do I'm
just going to work until I die that is
my life
[Music]
[Music]
this area had some gouges in it and if I
don't fade it with a red scotchbrite
into the gray scotchbrite you're going
to see that underneath the
paint hello people welcome to the next
day I have a problem this is the front
side marker light discontinued without
replacement there are aftermarkets but
they physically different
shape that's what the inside of mine
looks like not only is it discontinued
without replacement but I cannot find
any of these for sale used in America or
Japan so I have to restore this I don't
even know I'm going to get the bulb out
without stabbing my fingers in case you
forgot bulbs are glass and if I try to
squish that and take it out I'm not
going to have fingers anymore unless
that's the glass spinning and it's oh no
it's my finger spinning on my glass I
think this is actually just permanently
ruined
I don't foresee this ending well for
either the bulb or
myself what you're looking at is the
bottom of the inside of the bulb it's
still stuck down inside
there I got it I got all the bits out of
there and it's still usable check it out
there's the little plate there's the
spring and the wire that's attached to
it I'll actually be able to save this
thing and make it functional again well
there are couple people that do make
replacement lenses for these lights I
haven't figured out how I'm going to
clean down inside the belly button of
this thing and look at that they're not
even that's crazy the actual backing
plate and bulb holder for the usdm cars
is literally unobtanium unless you can
find one in a junkyard which is rare for
a car that's old now these are both now
stripped completely disassembled and
hopefully the zinc coater should bu a a
sand blast down inside those holes and
get it freshly resined so these are
supposed to be satin silver and they are
definitely they got some corrosion
coming through I need a clean source to
get this right well you can argue that
doing these black or gun metal like the
grill or even body color could all
potentially look good in their own ways
I am a fan of keeping it OE in this box
is the JDM Fender mirrors as you can see
they are a satin gunmetal color 100% the
same color I it makes sense these came
off the same exact car but in Japan it's
a little on the red side but yeah not
far off it's saying that it's mostly
made with 940 which is the coarsest
silver that I have so this is the print
out of all the different paint
quantities I need to mix together to
make the
color that one sounds fun medium
cornflake
metallic coarse pancake really so
[Applause]
now that I know what color it's supposed
to be I can strip
it oh yeah there is corrosion under
there you can see those little fine
brown dots underneath the paint had I
just scuffed this that would have just
came through again on the new paint
[Music]
I got a bit of a unfortunate time delay
this is not getting shot in this video I
put a little aircraft paint stripper on
it just to see what was actually hiding
underneath the paint that I was getting
off with that whistle biscuit and you
can see all the little corrosion pits so
the proper thing to do would be to
actually treat this metal with
phosphoric acid and then epoxy coat it
before painting it that's quite a bit of
extra
work it's the right thing to do though
[Music]
this piece of sheet is made out of
rubber rubber comes from trees although
this one probably came from recycled
tires and sneakers and condoms I don't
know if anyone actually recycles a
condom well I can use one of these edges
to my
advantage where is the hole about 7 mm
I got to punch these out and destroy my
toolbox
top according to my hair tie that only
took me about an hour to do that was
totally worth not just buying a set of
aftermarket
[Music]
ones all I did was clean these I haven't
polished the Chrome or the lens yet so
when I do the final detail I mean that
for being 50 years old that's amazing so
the JDM Corner lights are Amber the usdm
ones are clear and I really thought
about doing the JDM ones cuz I I love
the way Amber looks but these are the
ones that came on the car originally so
I got I got to keep the original parts I
just I have to keep as much of this car
Survivor as possible
[Music]
[Applause]
hello welcome to too many days in this
video a package has
arrived this is going to allow me to
continue with getting this car to have
its first start oh spider eggs under it
since I had to cut mine in half to
discover whether or not I let the smoke
out of it which unfortunately it was
still fine at least now I have a nice
fresh
one perfect
good to go not for human consumption and
the off chant that you stumbled onto
this video by mistake and have made it
this far in and you've never seen any of
my other videos in the past this thing
smells
horrible and you're wondering why my
jokes are as bad as this thing's
odor I don't even remember what I was
going to say anymore this smells so
atrocious this video was a bit of a
diversion from what I've been working on
for the past couple of months just
because purely I'm waiting on parts but
also so this is stuff that I don't want
to have to do once the car actually
starts running it's a tad bit thicker
than I was expecting that's it never
mind this smells like the inside of
Aussie Osborne's sock drawer this smells
like an undercooked expired Canadian
goose smells like a root beer flavored
shower curtain smells like the carpet at
a Margaret Thatcher book signing
committee it smells like when someone
else shits your pants smells like Harry
Potter's Harry possum smells like an
expired bag of vegan dog food this
smells like of Olive Garden sold toilet
mints the whole point of this foam is it
goes on the back side of this lamp so
that way it doesn't scratch or Mar the
paint on the lower balance but uh I
think the stuff I bought is just way too
thick cuz that's that's insane sometimes
I have ideas that don't work and this is
one of them I got to order much thinner
foam I would say 60% complete headlight
buckets need be prepped for black epoxy
as well as the balances these just need
black trim black 100% ready now to spray
the gunmetal on and this stuff just
needs to be detailed and put on the car
so in the next video on the Celica I'll
be doing some work in the paint booth
for all those trim pieces hopefully
making some fuel lines and brake lines
and putting the transmission back in the
car and then uh that was the last couple
things I needed to be able to actually
try to start this thing oh yeah and I
forgot I I have to finish up the MR too
so that has to happen so it's driveable
so thank you for watching and maybe we
do a live stream here soon too okay bye
