How To Re-Roll Screen For Your Window

American Window Concepts
139 followers
25 Video Views·Mar 23, 2024
Learn how to replace a window screen with this step-by-step tutorial from Sean at American Window Concepts. In this video, Sean demonstrates the process using simple tools like a razor knife and spline roller. Follow along as he guides you through removing the old screen, aligning the new mesh, rolling it in tightly, and trimming the excess for a professional finish. Whether you're a DIY enthusiast or just need to freshen up your window screens, this video has you covered. Don't forget to subscribe for more helpful tips on home improvement!
hey guys Sean with American Window
Concepts and today I'm going to teach
you how to roll a screen for your window
let's do
it okay so you'll see that I
have my trusty little razor knife I have
well this you can use either a putty
knife um I I just have this handy so
I'll use that to pull out the spline
itself my actual roller and the screen
mesh to replace this is f for better viw
just the same thing this is actually a f
for better viw mesh itself and we want
to keep the same exact thing so just to
show you how we do this I could probably
do this with my fingernail and pull this
out and it's actually coming out but if
you if it wasn't working like that let's
say it's all the way in you can go in
and just kind of grab it from the corner
I always like to start you look to find
where they're split and coming together
you know there's other sides that you
can see that are just they're just keep
going all the way around well I don't
want to pull it right there I don't want
to split it so I'll go to the section
where it's actually already you know
split and and then I'll start to pull it
there now the one thing I don't want you
to do is just start yanking on it give
little
pulls why do you why do you I say that
because if I pull it hard like this all
the way around you're going to actually
pull this spline and make it thinner and
so I don't want it to be thinner I want
it to be the same size it was as I'm
putting in the new mesh because I want
it to hold it in tight little pulls as
you're pulling it out now this is a
decent screen this is a good screen um
there's no need for me to replace this
but I got to show you how to do this so
little pulls all the way around there we
go now I'm going to reuse this and a lot
of times you can reuse the same spline
that's already existing in the screen
just set it aside and then now you can
easily go in I'll come from this side
push up and just get rid of this mesh
all
right trash what all do is your new
screen here what I'll do is I'll just
take it go for the length you know and
make it so that way you're using the
least amount of
screen roll it
out
right so you're
cutting set it aside okay so the one
thing I like to do and it's kind of hard
to show on camera but there's tiny
little boxes right so what I like to do
is I'm really trying to make sure that
these lines that are vertical are inside
this actual rectangle so I want it to
look good when it's done I don't want it
to look crazy like that how stupid would
that look right so I want this to look
as close to perfect as possible so line
up all your little boxes and all your
lines along with your frame okay you
have your long side here this is where
this came from and then you have your
short side on this side and that's where
this came from
I don't want to start it like this and
you know just it's my own take on things
I want to kind of put it back in the
exact way it was so what you do is go
ahead and just start one end push it in
with your
fingers and there you go you start to
roll it
in all right now what you're going to do
is you want to hold with your finger on
the frame and then your other fingers
here your line and the reason why you
want to do that is because as you're
rolling this thing if you're like this
and you're just trying to roll it in
this screen mesh is going to move all
over the place it's going to it's going
to look ridiculous so keep your mesh
tight and then I'm just going to nice
and gently roll this in don't be in a
hurry just nice and gently roll this
stuff
in okay take a
break go back a little bit further and
I'm pulling down I don't know if you
noticed that but I'm pulling down and
and so I'm pulling downwards and I'm
pushing down at the same time meanwhile
here I am with
this holding on to it as I
go okay so there's my corner now what I
like to do is I'll just
start I'll use my hands and I'll just
start it
right there we go now that's good enough
for now now what I'm doing is I'm going
to check my work I want to make sure
that all my lines look good now I'm
going to come over here I'm going to
hold the mesh just so I want this to
look just right now I'm going to change
the way I grip my spline so I mean I've
been doing this a long long time so you
know but this is anybody can do this
this is not hard work I mean
seriously
okay roll that in we get to the corner
and there we go now I'm checking to see
if this all looks good here on this
corner and it does it looks really
really good okay so now I'm going to
take my spinee and throw it over the top
now here's the
tray you do not cuz this is a rolled
form screen frame meaning it's Hollow
it's not very thick aluminum so if you
roll this too tight you're going to make
these centers pinch in and this these
outside uh Corners are going to be
exactly how they are you're going to
have what they call an hour glass shape
so you start it again now I'm going to
lightly pull lightly pull
and I'm going to start my corner
here here we go and I'll come back after
and I'll finish this all up now what I'm
going to do is I'm going to lightly pull
not too
tight and then at this corner check this
out this is where things get kind of
crazy I'm going to pull
diagonally okay so again I'm going to
change up my hands and my strategy I'm
going to pull diagonally and then I'll
start to roll it it in see I can already
see it cinching as I'm kind of going up
you do not want it to get too
tight just tighten that already looking
super good as I'm coming along it's
tightening
up and again don't be in a hurry this is
I mean it'll take just a couple
minutes there we
go okay cool now for this part I'll pull
tight because this is not as you know
long as the the legs are so I'll pull a
little tighter when I'm going this
direction set
it start
it okay
now at this point I'm going to go ahead
and make it a little tighter and I'll
fold it over the
frame and I'll start back
here push and pushing down now see what
I'm saying now you don't want to go too
too tight just a little tighter than
what I was doing before and you'll feel
it yanking on this as it's getting
rolled into the screen
frame super easy guys this is so easy
and most times you're always going to
have a little excess normal what you're
going to
get all right there we go we got a
couple inches extra but look at that
that's all nice and flat there's nothing
I me that's a that's a nice little r
screen now
I'll go around one more time and just
make sure that everything is in there
tucked really
well all four sides and a lot of times
what you'll find is on the corners
they're still kind of out a little bit
you'll just take a sharp object like
this and then you'll just kind of tuck
it like that super easy you'll just tuck
it
down and that'll finish
it four corners and then afterwards done
with this we'll actually do our last
step
so we got to take our razor knife and
we're going to cut off the
residual watch your fingers and you know
just be careful don't cut yourself okay
so we're tucked all four corners now the
trick is when I'm cutting with this you
want to cut at a 45° angle so
essentially and I'm using my fingers as
a like a runner and keep and don't don't
cut like this put your hand here yeah
put your hand over here or something
because you don't want to whoops and
then cut yourself right I mean that'd be
ridiculous
so that's it check your work cool you
don't want to cut on the spline right
and actually lose some of your spline
45°
angle and I'm using my finger to guide
me done look at how clean that is crazy
right all right let's go to the next
side now the corners are a little bit
different so I approach a a little bit
differently cut that side and then I'll
cut that side and just check and
sometimes you'll get bound up on a on
like a piece of fiber just cut it look
at how clean that corner is all right
keep on keeping on there we
go nice and easy start at this corner
and let my fingers lead 45°
angle okay look the screen
around and I'm just going to clean up
the rest that's it we're almost done
guys now there's some guys who do this
for a living that would smoke me they
would have had this thing done a long
time ago
but this is good
enough all
right no
hourglass right great little screen so
this one is ready to go back into my
showroom display for people to look at
and fall in love with okay guys that's
all you had to do for a uh for a screen
now there's kits that you can buy at
Lowe's Home Depot different places
that'll sell you the spline that'll sell
you Corners screen frame whatever you
need that's a different that's a
different day different video but this
is simply if you got some screen mesh
and the screen is
fine and all you need is just to replace
the mesh well that's all you have to do
right so hopefully this video helped
make it a great day hey guys if you live
in the Ventura or Long Beach area and
are interested in a free in home
estimate go to our website American
window concepts.com and we'll reach back
out to you as soon as possible if you
guys find this information valuable and
you want to continue to learn more about
Windows and Doors subscribe to our
Channel thank you so much
