給女兒做一個上學用的雙肩包,自己做就是好,包大而且揹著舒服 手工布藝 #DIY快樂手工

DIY快乐手工
7粉絲
2024年3月18日 #DIY快樂手工
我是手工愛好者,分享各種布藝作品的製作過程,複雜的布藝簡單的做。真心希望視頻可以幫到大家,也希望大家來訂閱我的YouTube頻道,歡迎大家點贊、分享和評論。謝謝大家支持!本人在在頭條和百度也有相同名稱的頻道。
微信公眾號為:DIY快樂手工
淘寶店鋪:DIY快樂手工
來去縫,分緝縫,包邊縫:https://youtu.be/AuKWUXlMECU
怎麼車縫好拉鏈:https://youtu.be/VeL_2M08j4c
怎麼選做包的拉鏈:https://youtu.be/RX8EpWkUQVA
怎麼熨燙鋪棉不起泡:https://youtu.be/TYUbZuNe6W4
怎麼選鋪棉:https://youtu.be/2jEYFRDaaN0
怎麼選按扣、氣眼、鉚釘:https://youtu.be/2dupt-hg7j8
怎麼包邊:https://youtu.be/20Q6Icz8Xg4
#DIY快樂手工
Hello, everyone, welcome to Happy Handicraft.
See, I made a backpack,
which is also for my daughter to start school.
In the past, her schoolbag was small,
and she had more and more books.
She didn't have enough in her schoolbag,
and she had to carry one.
This time,
I can fit it
all into the side pockets
on both sides.
It's always raining here,
so we made two very deep side pockets,
and the form of the interlayer is also very rich.
You can see it in the video later.
The most important thing is whether the thick piece of the schoolbag
and the shoulder strap are particularly strong.
It's because I weighed in the material when I made it,
and I'll reveal it to you in the video.
First of all, let's make the strap.
Its length is 42 centimeters.
This side is 7.5 centimeters.
Here is 6.5 centimeters.
Then we make a circle at the end of 6.5 centimeters.
I draw the drawing on the fabric.
There are two sides.
Here is a double layer.
We sew a circle along the drawn line.
There is no sewing here.
Trim off the excess material with the lace shears.
Then leave a 5mm seam allowance.
Strap I flipped to the front,
cut two pieces of material, and tucked it into the strap.
This is the express insulation bag for buying chilled food.
You see, it is very thick and strong.
The child's schoolbag is heavy.
It is more comfortable to carry it like this.
Then we sew a circle of open
thread to hold them together.
Next, we're going to cut a strap,
the length of the strap is 20 centimeters,
we're going to take a Japanese button,
put the strap through the middle of the strap,
fold this end,
and we'll sew two threads,
and then put one end here,
sew a thread first, then turn it down and we'll sew a frame,
and we put another one on this,
and then we'll do the other part of the back strap.
We prepare four materials,
two of which are ironed with cotton.
The two sides of the cotton are 6 centimeters,
and the bottom edge is 7 centimeters.
We clip a strip,
put it on the edge of 6 centimeters,
then put a piece of fabric on the bottom,
then we sew these two edges,
after sewing, turn it to the front,
we sew a narrow edge here,
and then we prepare a cloth strip,
the width of the cloth strip is 5 centimeters,
and the length is 1 meter. 1
This side is ironed with non-woven lining.
We iron a seam allowance inward on both sides,
and then prepare a short cloth strip,
which is also 5 cm wide
and 35 cm long.
Similarly, I put in a seam allowance,
and I lined a 180-gram cotton in the middle,
and then the center line of the short cloth strip and the center line of the long cloth strip,
we aligned them and covered them.
When it's done, we sew a line on each side.
The part we sewed just now is the handle of the bag.
Now we make it on the front piece.
Let's talk about the size of
the front piece.
The length is 45 centimeters and
the height is 30 centimeters.
We put one centimeter of seam allowance on it.
I sewed thread on it.
We put it on
the front face. We need to make a pocket
This is the inside of the pocket
I'm burned The dimensions of
the non-woven lining are 21 cm in length
and 18 cm in height
The lining is aligned with the face
Let's sew a line first
turn it over until the center line of the front is aligned
and then align the raw edge at the bottom
Then take out the handle we made before
and then we put it on the front piece
It's aligned here
The distance from this edge is 6 centimeters
Then after we finished it,
it was like this, which just covered its raw edge.
After we put it on,
we sewed three lines.
After sewing, the position
of our handle was covered like this,
but it did not sew to the end.
Then the other side is nested like this
We sew the front piece in the same way
and I sew it
This is the stitch I sewed
This place of our handle is not sewn
Next, let's look at the back piece.
The size of the back piece is the same
as that of the front piece.
I also sewed thread on it.
Here we need to open a zipper opening.
Let's talk about the position.
Here is 5 centimeters,
and this is 9 centimeters.
That's where we go to lay cotton. Then its width is 1.5 centimeters,
and its length is 15 centimeters.
Draw the position of the opening on the front.
Then we prepare a cloth strip
the length of the cloth strip is 18 centimeters
the width is 6 centimeters
two raw edges are folded in half
and we aim at the center line to sew this line
that is
sew on the upper edge
After sewing, cut the zipper opening along the center line,
cut the bevel angle at both ends,
then fold the cloth and seam allowance to the reverse side,
and iron it with an iron to fix it.
Next
prepare two pieces of pocket cloth
The length of these two pieces of material is 26 centimeters and the height is 18 centimeters
We open a zipper opening for one of them
The method is the same as before
Then we cut an 18cm long zipper and
put the zipper under the zipper opening.
We sewed on four edges.
Next, we align the zipper opening with the zipper opening on the face,
and then we sew a narrow edge on the front.
When doing this step,
if the two openings are not aligned, it will be very ugly.
I will use the cloth to connect the two layers first with the double-sided tape.
This double-sided tape does not need to be ironed
and it can be washed off
Next we take another piece of pocket cloth
we cover it
and then we sew on these four edges
and we pick it up and sew while we sew
I don't know if my friends remember the method of making
pockets this time,
but I did it for the first time.
I think this method seems to be very complicated,
so I simplified it this time.
Handwork is actually like this
as long as you do it well
any method is OK
the simpler the better
Next, let's do the zipper part.
The length of the edge strip pavement is 56 centimeters and the
width is 6 centimeters.
We put 1 centimeter of seam allowance,
two in the face
and two in the chair.
Then we prepare a 58 cm long zipper.
We sewed on the zipper strip.
After turning to the front, the two sides of the zipper are sewn on the edge. Next,
the material of the side is introduced.
The length of the cotton is 85 centimeters
and the width is 15 centimeters.
It is also a one-centimeter seam allowance.
One piece of face and one piece of lining.
We put the zipper we just made between them.
We sewed the two ends. After sewing,
we turned the material on the side to the front.
Then I made two pockets on the side.
The children put water cups and umbrellas.
I would like to introduce the material on the side to you.
The length is 28 centimeters,
the width is 17 centimeters,
one face, one lining,
and two pockets.
We sew up the material on these two sides and move it to the front,
and then we put the pocket material under the zipper and
sew up these three sides.
Next
we take out the lining of the back piece
I make a big interlayer on the top
I iron a cotton interlayer in the middle and make a zipper pocket on the top
Let's make this part first
Now we fold the lining of the front piece and the back piece
and then sew the whole circle of the front piece for a preliminary fixation
We sewed these three edges on the back piece,
leaving a gap here.
I cut a piece of insulation material and stuffed
it into the back piece.
The size of the material is the same as the cotton of the back piece.
Next, let's install the braces.
We first cut out a slope here,
the center point here,
when we install the strap, it is against the center point,
and then install another one,
the handle is next to the bottom of our strap,
we measure 5 centimeters,
install the other part of the strap,
and then it is assembled.
It's easy to say. In fact,
it's not easy to do it well.
Today, this bag is too big. I suggest you sew a circle by hand first,
then sew it with a sewing machine,
and finally wrap it with a wrapping belt.
Friends, the bag is ready.
After all, it's made of my own fabric.
It's a little big.
I like big bags, and my children
also like big ones.
It's convenient to put things.
I also made a button like this for the handle. After the handle is buckled, it won't open.
I used a total of 60 centimeters of solid color fabric.
There is also this video in the window
That's all
Thank you for spending your precious time to watch my video
Remember to help me like it
See you next time
