大開合收納包製作教程,收納拿取都方便,中間有夾層更實用 手工布藝 #DIY快樂手工

DIY快乐手工
7粉絲
我是手工愛好者,分享各種布藝作品的製作過程,複雜的布藝簡單的做。真心希望視頻可以幫到大家,也希望大家來訂閱我的YouTube頻道,歡迎大家點贊、分享和評論。謝謝大家支持!本人在在頭條和百度也有相同名稱的頻道。
微信公眾號為:DIY快樂手工
淘寶店鋪:DIY快樂手工
來去縫,分緝縫,包邊縫:https://youtu.be/AuKWUXlMECU
怎麼車縫好拉鏈:https://youtu.be/VeL_2M08j4c
怎麼選做包的拉鏈:https://youtu.be/RX8EpWkUQVA
怎麼熨燙鋪棉不起泡:https://youtu.be/TYUbZuNe6W4
怎麼選鋪棉:https://youtu.be/2jEYFRDaaN0
怎麼選按扣、氣眼、鉚釘:https://youtu.be/2dupt-hg7j8
怎麼包邊:https://youtu.be/20Q6Icz8Xg4
#DIY快樂手工
Hello, everyone, welcome to Happy Handicraft.
What I share with you today is the method of making a storage bag.
The storage bag has a long zipper,
including a large opening and closing.
It is very convenient to store and take.
It can be used as a cosmetic bag and a material bag.
I also made a sandwich pocket with a zipper in the middle,
which is more practical for classified storage.
Let's make a sandwich bag with a rubber band first.
I'll fold this material in half, so it's easier to say.
This side is 33 centimeters
the lower side is 22 centimeters
the height is 9 centimeters
this is a trapezoid
we sew these three sides first
leave a return here
and leave one centimeter at each end No sewing
I turned this material to the front
we sewed another line on this side
the width is one centimeter
and then cut a rubber band
we put it in from the track
and then fix it at both ends
Now we are introducing the main material
The middle of the main material is a rectangle
and the two sides are equilateral triangles of 11 centimeters
The side of the rectangle is 24 centimeters
and the height is 11 centimeters
On the face
we put one centimeter of seam allowance
the face is two parts
and the lining is also two parts
We fixed the sandwich pocket with rubber band we just made on
the top of the lining.
We sewed these three edges.
These two pieces of material are the side cloth.
Just like before, I folded the long
edge 13 centimeters,
the lower edge 6 centimeters,
and the height 8 centimeters.
Let's sew this edge up and turn it over.
When the fender was turned over to the front
I reinforced it by sewing a narrow edge on each side
Next, put two pieces of party headquarters on the top of this hypotenuse,
which is one centimeter from here,
and we sew a line to fix it.
Next we take a 52 centimeter long zipper
we separate it
the center point and the center point are aligned
the zipper teeth are punched in
and I use a clip to clip it first
Then we take out a face-saving material.
I made a handle on the face material
After the handle is made
the length is 18 centimeters and the width is 2 centimeters
The fixation is that the center point is aligned
this side is three centimeters down
we put this material on
the front and the front are opposite
and we sew the zipper
After sewing, turn over to the front,
turn down the two pieces of cloth,
then sew a narrow edge along the zipper,
and then this
side of our cloth and our other lining face
are in the same position.
One centimeter over here
and then put the center point of our zipper
let's align it
and then cover our face
Now the main material and zipper are sewn on,
and the zipper head is installed.
This is the front side of the material.
We turn it over to the inside side,
and then introduce to you its bottom material.
The length of the cotton is 24 centimeters,
the height is 22 centimeters,
four corners, round corners,
and then put one centimeter of seam allowance,
one face,
one inside.
We stack the two materials together
and we can sew a circle to fix it
After sewing,
the edge of 24 cm is aligned with the two ends of the zipper of this edge,
which is aligned with the center point of 22 cm.
We sew a circle of raw
edge and wrap it with a wrapping tape.
When the bottom is closed, we turn it over to the front.
Next, let's make the zipper pocket in the middle.
The length of this material is 21 centimeters and the height
is 17 centimeters.
I have ironed the face. The solid color of the
non-woven lining is the face.
This flower is a
face of the lining and a lining.
We separate the zipper,
put one on each side,
then the zipper teeth are in,
the front and the front are opposite,
cover our lining, sew a line on each side,
clip the interlayer in the middle of the cloth,
sew a line on each end.
Now the storage bag is ready,
my friends. I'm sewing again.
Originally
I imagined that the side of this bag would be a square after it was finished
But when it's done now, it's a diamond.
But it doesn't matter
I will make it after a while
and I must make the side square
That's all for this video
Thank you for your precious time to watch my video
Remember to give a like
See you next time
