做了幾款爆款包,從標價100多的開始做起,今天我做一個1000多的 手工布藝 #DIY快樂手工

DIY快乐手工
7粉絲
我是手工愛好者,分享各種布藝作品的製作過程,複雜的布藝簡單的做。真心希望視頻可以幫到大家,也希望大家來訂閱我的YouTube頻道,歡迎大家點贊、分享和評論。謝謝大家支持!本人在在頭條和百度也有相同名稱的頻道。
微信公眾號為:DIY快樂手工
淘寶店鋪:DIY快樂手工
來去縫,分緝縫,包邊縫:https://youtu.be/AuKWUXlMECU
怎麼車縫好拉鏈:https://youtu.be/VeL_2M08j4c
怎麼選做包的拉鏈:https://youtu.be/RX8EpWkUQVA
怎麼熨燙鋪棉不起泡:https://youtu.be/TYUbZuNe6W4
怎麼選鋪棉:https://youtu.be/2jEYFRDaaN0
怎麼選按扣、氣眼、鉚釘:https://youtu.be/2dupt-hg7j8
怎麼包邊:https://youtu.be/20Q6Icz8Xg4
#DIY快樂手工
Hello, everyone, welcome to Happy Handicraft.
I made a hot
bag in the video,
from 100 yuan,
then 300 yuan, and 600 yuan,
step by step.
Today, I wanted to make a 1000 yuan bag.
I chatted blindly during the meal.
I said I wanted to make a 1000 yuan bag.
My daughter said, "Oh, you are promising.
" I said, "That's not true.
I've been making videos for such a long time,
so I have to be more capable."
To say so
I really encountered difficulties in the process of doing it
because the data of this package was quite complete inside and side
they did not give pictures
nor let me see
I thought for a long time but did not understand
Then I began to reason and
went to his official website to see other styles of bags,
because the process was almost the same,
and finally I made it.
There are a lot of interlayers,
and its capacity is also very large.
This is a main pocket,
and there is a big interlayer pocket inside.
The pocket is quite big, so it is no problem to put the mobile phone.
Here, my friends,
this umbrella can also be put in,
and I think it can also put a cup.
There is also a small pocket here
and there are more forms of interlayer inside the small pocket
There is a website like this that says it
is for glasses,
and I think it is suitable for me.
Then there are two interlayers for cards.
Let's do this part first.
This is the material for glasses pocket.
It's a 19-centimeter square. We fold the material in half and sew it up.
Leave a
return opening on the three sides
and turn it over to the front.
After sewing, we turn the material to the front,
because we will make a zipper opening later,
we will use double-sided tape to glue the two layers together,
and then we will be more comfortable when we cut it.
Next, we draw a rectangle 0.5 centimeters from this side.
The width of the rectangle
is one centimeter and the
length is 13 centimeters.
We cut it open
and the two ends are cut triangles
After we cut it,
we iron it, and then we cut a 15-centimeter zipper,
and we put it on,
and then we sew the whole circle.
Next we prepare a 22cm square
then align the center point of the zipper pocket with the center point
then 1cm away from the raw edge
we put it on
and then sew on the four edges
Next, let's simply make a card interlayer.
The length of this material is 21 centimeters and
the height is 4 centimeters.
We iron the three edges of the material into a seam allowance,
and then fold the seam
allowance in half to cover the raw edge.
We fix it in the position on the top of this material,
which is one centimeter from the center line.
As you can see, this line is the center line of the whole material.
We sew these three edges and then
we sew a line in the middle.
Now I have finished the two interlayers.
The two lines at the bottom of the card interlayer
are to sew the raw edges.
Take a video so that you can see it clearly.
I use a solid color fabric for the card interlayer.
Next
let's cut a piece of face material
The length of this material is 46 centimeters and the height is 28 centimeters
This is a piece of violet material
In the front of the video, I think this material is a little distorted.
The color is very nice, and it is also in my window.
Let's put the material we just made
11 centimeters away from the raw edge,
and let's align the center line.
Then two pieces of material, we need to sew a box,
this box is one centimeter from the raw edge here,
the length of the box is 18 centimeters,
and the width is one centimeter.
Here I would like to
remind you that when we put this material on,
the front and the front are opposite.
After the box is sewn
we cut two ends in the middle and cut two triangles
Next, we put the pocket cloth on the
reverse side.
After putting it flat, we prepare a 20-centimeter-long zipper.
We put the front of the zipper flat on
the
bottom and sew a circle to fix the zipper.
After the zipper is sewn
we turn it over to the reverse side
and then we fold the pocket in half and sew on these three sides
When we sew
the amount of sewing here is not very large
When we sew
we turn it over and change a unilateral presser foot
Let's sew up here first.
Now our complicated small pocket is finished.
Next, I will introduce the size of the lining material to you.
The length of the material is
41 cm and the height is 28 cm.
We need to make an interlayer pocket on the inside.
The method of making the interlayer
pocket is the same as that of putting glasses before.
I will not delay your time here.
I will tell you the specific size of the material.
The material of the sandwich pocket is a square of 25 centimeters
and the length of our zipper is 23 centimeters
After the pocket is made
we should align the center line on the inside
and then 11 centimeters away from this side
Next we prepare a zipper
the length of this zipper is 28 centimeters
we separate the zipper
and then put this half zipper here
The zipper teeth come up from
the front of the zipper inside,
and then we cover the face material
and sew a line like this.
Our lining and face zippered pockets are
on the same side.
Don't put it wrong.
After this line is sewn,
let's prepare two ribbons.
The length of this ribbon is 60 centimeters,
and this one is one meter. Next,
we fix the ribbon.
We are 2.5 centimeters away from the sewing line.
We fix the ribbon.
When we fix it, we have a little more,
for fear that the ribbon will fall apart later.
This line is a double line.
Let's fold over the lining.
After folding, the raw edges of the lining and face are aligned.
Next
let's sew a line segment
Let's say that the distance here is 0.5 centimeters
and the distance from here to this point is 1.5 centimeters
Let's sew a diagonal line like this
to fix the webbing.
When sewing, we don't sew the zipper.
We fix another ribbon here.
After sewing these two lines,
we turn the material to the front to see the effect.
The effect of the front is like this.
Next
we sew a narrow edge like this to reinforce it
It's the same when you sew. Don't sew on the zipper.
The sewing of the narrow edge is finished. Next,
we will install the other half of the zipper.
We turn the material over,
and then put the other half of the zipper on the two raw edges.
The teeth of our zipper are punched in,
and then the front of the zipper is opposite to our face. After that,
we sew the whole together.
After the zipper was sewn
I turned it over and sewed a narrow edge
and then we put the zipper head on
Today I'm going to put two
zippers so that our bag is a two-way zipper.
Now I would like to introduce the side of the material face 2
inside 2.
The length of the material is 14.5 centimeters,
the width is 10 centimeters,
and the four corners are rounded.
I use a button, and we draw a circle.
Then we fold up the material,
the lining and the face, and then prepare a piece of webbing.
The width of the webbing is
2.5 centimeters.
We put on the mouth buckle. The inner diameter of the mouth buckle is also 2.5 centimeters.
We put it 2.5 centimeters away from this side.
The position of our two webbing is opposite
so don't put it wrong
Then we sewed the whole circle
to fix it initially,
and I took care of both sides.
Next
we will take out the main material we made before and explain the structure of the main material to you first
Now it is still a barrel shape
The middle line of these two zippers is the center line of our bag top
which is very important
When we do it later, the center line is aligned with the center line,
so we need to find the center line.
We turn the main material to the reverse side,
and then our center line is aligned with the side center line.
The bottom is also aligned with the bottom.
We sew a circle,
and this side is the same.
Then we wrap it with a wrapping tape.
Now the two sides are together.Next,
let's turn the bag over to the front.
Let's tell you that we
have a long webbing on the side.
Yes, it's a short webbing.
Let's look at this line,
the center line of our top.
Now let's put the long webbing through the buckle.
The two sides are the same.
We fix a buckle on both ends
and the bag is ready
If we put less things,
we can narrow the side by
tightening the long webbing.
This is a hot bag,
through this opportunity, I would like to say a digression to you.
Some time ago, because I made a lot of hot bags,
a friend left me a message in the message area,
saying that our country's property rights protection has a long way to go.
When I saw this problem, I was confused at that time.
Why did
I infringe the copyright when
I made a hot bag?
So our common people are not particularly
familiar with the law,
so I went to the Internet to search for
a question to find an answer,
but I didn't find
the same question.
I found a similar one,
and the question this person asked was whether
it was infringement to draw according to the picture.
If the lawyer's answer
is not for profit,
it is not an infringement.
Its legal basis is Article 22 of the Copyright Law
of our country.
I think my situation is particularly like this,
for personal study or appreciation of
the use of other people's published works.
I believe that after reading the lawyer's message
everyone knows whether I have infringed copyright or not
But then again,
there is no way for us to make
a bag like this at home to compare with
a bag that costs more than 1000 yuan.
This bag has a layer of leather in front of it,
and the price is different.
There are also hardware,
and the most important thing is the logo of the brand.
There is a saying in the
fashion circle that wearing luxury goods is never
for comfort.
Is that what this video is about?
Thank you for your precious time to watch my video
remember to help like
we will see you next time
