做了一個電腦包,側邊裝了一根拉鏈,包能變寬又能變窄 手工布藝 #DIY快樂手工

DIY快乐手工
7粉絲
2024年3月5日 #DIY快樂手工
我是手工愛好者,分享各種布藝作品的製作過程,複雜的布藝簡單的做。真心希望視頻可以幫到大家,也希望大家來訂閱我的YouTube頻道,歡迎大家點贊、分享和評論。謝謝大家支持!本人在在頭條和百度也有相同名稱的頻道。
微信公眾號為:DIY快樂手工
淘寶店鋪:DIY快樂手工
來去縫,分緝縫,包邊縫:https://youtu.be/AuKWUXlMECU
怎麼車縫好拉鏈:https://youtu.be/VeL_2M08j4c
怎麼選做包的拉鏈:https://youtu.be/RX8EpWkUQVA
怎麼熨燙鋪棉不起泡:https://youtu.be/TYUbZuNe6W4
怎麼選鋪棉:https://youtu.be/2jEYFRDaaN0
怎麼選按扣、氣眼、鉚釘:https://youtu.be/2dupt-hg7j8
怎麼包邊:https://youtu.be/20Q6Icz8Xg4
#DIY快樂手工
Hello everyone,
welcome to Happy Handicraft.
Friends who often watch my videos must know that I love to make bags,
especially interesting bags.
Interesting, I feel nothing more than just pockets,
some pockets are various,
some are a bag with a variety of ways to carry.
The interesting part of my bag today is
on its side.
This is a computer bag.
The thickness of the bag is
4 centimeters.
If you unzip the zipper, the thickness of this bag can reach 8 centimeters,
so the capacity will increase.
Next, I will share with you how to make it.
First of all, let's make the pocket on the front piece.
This is the material of the pocket.
The length of this material is 40
centimeters and the height is 16 centimeters.
The length of this material is
7 centimeters and the height is 12 centimeters.
I ironed 60 grams of non-woven
lining on the reverse side of these two materials.
First of all, we fold the material
in half and fold the front inside.
We sew the big material on this side
and the small material on these two sides and turn it to the front.
Next we prepare a 16 cm long zipper
and then put the big piece of material on the bottom of the zipper
we sew a line
and on the top we put the small piece of material we just made
to cover our zipper
so we sew a line
We have raw edges on this side
as well as the bottom
Next
I would like to introduce the material of the main body
The length of the cotton is 39 centimeters and the height is 30 centimeters
We should put one centimeter of seam allowance on the fabric
The face is two parts
and the lining is also two parts
We put the zipper pockets we just made on
the face of the main material,
we align the raw edges,
and then sew on the four edges.
I'm going to make two pockets on the front.
Next
let's do this pocket The material is a square,
36 centimeters,
the small 24 centimeters is the material of the lid,
I have ironed 60 grams of non-woven lining on the reverse side of them, this lid,
we fold it in half,
fold the front side
on the inside sewing,
leave a return opening on these three sides,
turn it over to the front side,
our pocket is also folded in half,
and then, 4 centimeters away from the folding line,
we sew a 10 cm line.In the middle position
Next we spread out the pocket material
and press down the pleats.
In the middle, we iron it to death.
Then we fold it in half,
the front fold is on the inside,
we sew this edge seam, after sewing,
we turn the material over to the front,
at the mouth of the bag, we sew a narrow edge,
then we fix the bag on the top of the front piece,
our cover is aligned here,
sew a line, I put a male and female in the corresponding position,
the position of the bag is aligned here.
Let's sew these three lines like this.
Next
let's make the interlayer on the inside
The height of this material is 50 centimeters and the width is 42 centimeters
I cut a piece of insulation material for express delivery
which is full of electronic products
We need to make a slightly thicker interlayer
We fold the material in half and sew on these three sides
Next
we fix the interlayer material on the top of the lining
We align the bottom and sew on these three sides
In the middle
we need to make a cloth loop
This is the material of the cloth loop
Here is an ironing pad
16cm in length and 5cm in width
We fold it in half,
fold the front inside,
and then sew it. After the two long edges
are turned over to the front,
we put this material in the middle,
sew it here, and a line is also fixed on the inside.
The interlayer is done
and I sewed a male and female patch here
which is the same as before
Next we take out the face material of the back piece
we fold them up
then sew on the four edges for a preliminary fixation
and then 5 centimeters from the middle position on both sides
we fix a handle
the length of the handle is 50 centimeters
and the width is 2.5 centimeters
This is our front piece.
We have made two pockets before,
and it is the same. After folding,
we put four sides on the side, and then fix our handle.
Next, we will make the side of the bag,
which is also the key side we made today.
There is a long zipper on the top,
and the side strip is also very long.
Let me show you.
It's very long.
Maybe it's not comprehensive in the lens.
The length of the cotton is 88 centimeters and
the width is one centimeter.
I threaded it
Make it strong
Next we sewed the border strip and the zipper together.
Turn over to the right side and let's sew two pieces. Narrow edge
After the border was sewn,
I trimmed it. After trimming, the width was 5 centimeters.
Now we are preparing two pieces of material
The length of this material is 90 centimeters
the width of the middle is 8 centimeters
and the two sides are 7 centimeters
We fold these two pieces of material together,
then separate the edges we just made,
align the raw edges,
and put half of the
zipper on each side.
Then we sew these two edges.
After sewing, we install the zipper head.
Now this material is arched like this.
We press down the arched part of the two ends
of the zipper like this,
and sew a line like this.
The arched part in the middle is also like this.
Press it down and iron it flat.
Next we prepare two pieces of material,
the size of the cotton,
the height is 5 centimeters,
the width is 4 centimeters,
we put 1 centimeter of seam allowance,
we put two pieces of material between the zipper edge face and face opposite,
lining and lining opposite,
zipper in the middle,
we sew a line, here clip the other one.
Now we start to make the bag in combination,
and this step is almost the same.
The front piece and the
back piece are on the side.
We align it with the opposite center point of
the front and front.
These three edges are also put on this piece,
and then wrap the raw edge with the wrapping tape.
Next, let's do the zipper part of the bag mouth.
Let's talk about the size of the cotton.
The length is 38 centimeters,
the width is 2 centimeters,
and the seam allowance is 1 centimeter.
The face is two parts,
and the lining is two parts.
The length of the zipper is 45 centimeters
The end of the zipper is folded first
We sew a line here
and then clamp the end of our zipper with the lining face
The end is aligned
and there is a surplus here
When we sew, we fold the zipper in and sew,
and we sew on these three sides.
Then turn over to the front sewing. Narrow edge
I sewed the zipper part.
I wrapped a piece of cloth at this end. Next,
we put it on the top of our bag.
It's easier to pull it open.
We put the raw edge here at the mouth of the bag
sew a line here
put this end here
and then wrap the whole circle with the wrapping tape
Now I have finished the whole bag.
Before I went out, I used this bag to take the computer.
It has no interlayer,
so if I take the tablet, I have to take another bag,
as well as the power cord,
and the mouse needs another pocket,
which is very troublesome.
This time
this bag can be put in here
it is very convenient to put the mouse and the power supply
That's all for this video
Thank you for your precious time to watch my video
Remember to help me like it
See you next time
