How To Make Polymer Clay Cherry Blossom Earrings | DIY Polymer Clay Easy Beginner Floral Earrings

DIY Cute Things
114 followers
Hello, welcome to my channel. My name is Junani. Today I'm gonna show you guys how I made these
cherry blossom earrings. So I'm getting started with this beautiful light pink color and I ran
it through the pasta machine on about the mid thickness. So I'm using this circle cutter to
cut out the petals and the base for the flowers. So to create the petal, I'm taking one of these
circles and lightly pinching it at the bottom. Then using a mid-sized ball tool, I'm giving the
top of the petal some stretch. You can do this on a sponge or a piece of silicone but I personally
like doing it on top of my finger because I will have a little bit more control. Here I'm using a
needle tool. I'm scoring the middle of the petal for some details and to give the petal some organic
feel, I'm using the needle tool again to create some folds. It's like, I would call them ruffles
but it's like those little details that you see on petals. I like to create them towards the inside
as well as away from it. So I repeated the same steps and created about five petals for each flower.
And like always, all the tools and supplies will be listed down in the description box
so make sure you guys check it out. To assemble the flower, I'm using the same circle that I cut
earlier for the petals. I'm placing each petal so they can meet at the center.
Here I'm lightly blending in the joints of each petal
at the center of the flower. A small ball tool or the back of a brush will work well for this.
Here I'm adding some shadings on the flower. I'm using
some soft pastels in the color of red and a soft bristled brush.
Now to create the middle of the flower, I'm cutting some small pieces of wire
from this eye pin that I had and of course I'm going to use a blob of clay adhesive on this
because I'll be adhering wire to clay. I think the middle of the flower is called a pistol
but please do correct me if I'm wrong. I have no idea what it's called. Please do leave a comment
down below on what it's called. I cut about five pieces of these small wires using a pair of
tweezers. I pushed the wire into the center of the flower. Then using some yellow clay,
I rolled tiny balls and placed it on top of the wire. I pushed it slightly and I also used a
generous amount of clay adhesive for this. By the way, I do have another tutorial. It's a little
older for cherry blossoms. It is a slab that I'm making. I'll leave it in the description or
up there on the little card thing that pops out so you guys can check it out. While I was scrolling
on Instagram, I saw this other technique on how to do the center of these flowers.
They were not cherry blossoms. I don't remember what flowers they were but they were done by those
Russian ladies, I believe. Those beautiful, beautiful botanical creations. Their flowers
are immaculate. So what I did was I got some clay adhesive. I chose this because it is a little bit
thicker than liquid clay. Then I scratched some soft pastels to it and mixed it very well.
Then I carefully scooped it and add a blob of it on top of those wires. This takes a little bit of
practice but once you get a few down, you will make up your own way of doing it. For me,
applying the adhesive in kind of like circular motions and avoiding the axes worked best for me.
I created a few more flowers because I'm hoping to open up my store in the near future.
I will have a few more creations along with these cherry blossoms so stay tuned for that.
With these earrings, I wanted to try something different. I have never done this style. I have
seen it everywhere and it's so beautiful. I went with this style. It is a dangly kind of style.
So what I did was I embedded the eye pins into the flower. I used a generous amount of liquid
clay adhesive. I added the eye pin onto the base and then added the petals on top.
I also free-handed some petal leaves for this design as well.
Also, if you guys haven't seen my shorts already, make sure you check them out. I started a mini
series on there. I call it the key series. I found these tub of antique looking keys. I don't know
where it came from. I just had them for the longest time. So what I'm doing is I'm adding
little details to those. I do have two episodes out and the next one is going to be inspired by
this tutorial so make sure you check it out. So like always, I baked them in the oven for about
an hour in 275 Fahrenheit. Once they cooled down, I drilled in the holes and added the hardware.
Here's how they turned out. Thank you so much for staying until the end of this tutorial.
Down in the comments, please let me know, have you been to a cherry blossom festival?
I personally have not but I would love to. Anyways, thank you so much. I'll see you in the next one.
