How To Make Polymer Clay Valentine’s Earrings | Easy No Mold Beginner 3D Roses Floral Earrings

DIY Cute Things
114 followers
#DIY&Howto #PolymerClay #Valentine’sEarrings #3DRosesFloralEarrings
Hi everyone, welcome to my channel and happy new year.
This is my first tutorial of the 2023.
So I am starting off with a floral tutorial to kick off the new year and also for the
Valentine's Day.
So one of the goals that I have for this year is to use up my scrap clay.
The colors that you see, I use my scrap clay to create those and I'll be using this black
clay as my base.
So I ran the black clay through the pasta machine on the thickest setting and I'm here
folding it in half so I can get a better thickness to create my base.
Unlike other earrings that I create, most of the other earrings, I'm going to be cutting
up the base first.
I use this square cutter, it has nice rounded up corners and I'm going for this bead kind
of look and I am of course going to clean up the edges.
This will help me so much at the end so I don't have to do a lot of sanding.
Like I mentioned before, I'm going for that bead kind of look.
So I am using these eye pins and here I'm straightening them up so I can poke it right
through the base.
I will link these down below for you guys.
I think I got these off of Etsy but I will link them down below.
So I'm just carefully poking them through to make sure that I keep the shape.
It is helpful if you can put the clay on top of your tile and press the eye pin through.
Alrighty, now we're moving on to the fun part.
I'm using this dusty rose mauve, not sure what color this is, but this color to create
the petals and I'm using this dot cutter.
You can use a larger cutter as well or use them together or whatever you prefer.
So I ran this clay through the pasta machine on the thinnest setting just to make sure
that we have a nice body to the petals that we're creating.
I'm using the dot cutter to create and cut as many petals as I could get.
So before I jump on to create the flowers, I'll be creating the stems for the flowers.
I'm using this sage green color that I mixed up.
I am going to roll out a snake as thin as I could get and I am using about three stems
on this design.
Of course, you can use a little bit more and have it spread out, whatever you have
in mind for your design.
Now I'm ready to create the petals.
So I'm going to pick up one of these circles that we cut and I'm going to use this ball
tool to give some body, some texture to the petals.
I'm going to just push it through from the middle and create like spread it as thin as
I could.
It's going to create this nice fabric drapey kind of texture on the clay.
That way we can get the details on the petals.
So here I'm placing it on the base, on the stem, then I'm using the needle tool to kind
of get the details on the petal and just pushing in, creating like a ripple effect
I would say.
Then I'm moving on to the next petal as well, doing the same process over again for the
base of the flower.
I'm using about three petals.
Of course, it could be your preference depending on what style that you like.
These ones, I kind of wanted to go into like a wild rose, peonies kind of look.
So that's why I am going to put three petals on the bottom base and then two in the middle
and one at the top.
That way you can have a nice 3D flower kind of look to it.
So it's not going to be too bulky, but it's going to have that nice 3D effect without
the bulk.
So I'm going to do the middle a little differently.
I'm going to still texture the petal with the bowl tool, but instead of just placing
it as is, I'm rolling it from one corner to the other.
It's like kind of like a rolled effect in the middle.
I have created two of these for this particular flower.
I'm so sorry.
I know it's a little bit blurry, but I think the next one would be a little bit clearer
that you guys can see it is the same process of creating the texture and just rolling it
and placing it.
Last but not least, the final closing petal, I would like to call it.
It is going to be the same process.
We're going to do the texturing, but I'm going to do something a little bit different to
this petal.
I'm going to pinch it from the bottom a little bit.
That way it'll be easier for it to sit right underneath all the petals that I created before.
You'll see in a second right there.
So it just sits right at the bottom of all the petals.
That way we can fully close out the flower and texture it and add the details.
So using those same steps, I created two more flowers for this design.
Of course, they're not going to turn out the same every time you do this technique.
That's the beauty of it.
They're going to turn out very different.
They're going to have their own unique, beautiful qualities, I guess.
Put on your favorite TV show.
I like to watch ghost hunting TV shows.
I know my husband always cringes at me when I watch them.
He's always like, oh my God, those are fake.
Don't watch them.
But I love them.
It's just the thrill of it.
But put on your favorite TV show, grab a cup of coffee.
It's going to go quite fast once you get the hang of it.
And of course, if you guys have any questions, please, please do comment down below.
I'll try my best to answer it or you can contact me on my Instagram.
I do try to answer every single one of my DMs.
I'm not as active there as I would like it to be.
It is a full-time job to be active on Instagram, let's be honest.
But also, if you have any ideas for future tutorials, please, please let me know because
I think I'm running out of ideas.
If you would just like to see any other clay projects, not just earrings, please let me
know.
So I actually added a little bud onto the metal flower as well.
It's just one petal and I textured it using the needle tool.
So next, I'm going to be creating the leaves.
I got this sage color again and I got the teensiest little ball of clay and I'm going
to roll it into a shape that's like a rice grain.
Then I'm placing it wherever I like and then using the needle tool to kind of place it
and press it.
There, I just messed up a little bit so I'm going back and rolling it and now I'm placing
it again.
It's like from the bottom to top.
I am using the end of the needle tool to create that little detail on it.
Then we have our main part of the earring completed.
I'm going to show you guys how to create some beads.
If you don't have bead rollers or those fancy bead tools, this is a great technique.
I am cutting up large size circles and medium size circles for these beads that I'm going
to be showing you guys.
So I'm going to use this large circle first.
I'm conditioning it a little bit and then rolling it into a smooth ball.
You want to get the ball smooth as you could.
So this bead is super simple.
I'm going to place my clay ball on my tile and kind of press it only from one side.
Kind of press it and rolling it.
You get it, roll it really slowly, don't go really fast because what it's going to do
is kind of create that cone shape and you just want to kind of smooth it out and it's
going to have a cone shape at the top and at the bottom it's going to be nice and round.
I'm pretty sure this has some kind of name in geometry but I'm not sure what it's called.
I think it's a really cute bead and it's really easy to make.
So this second bead is really simple as well.
It is a really nice filler bead I would say.
Again roll it into a circle, I mean a ball, a really smooth ball and I am going to be
using a small acrylic ball for this.
Make sure it's very smooth like so and I'm going to put it back on the tile and kind
of press it a little bit.
You don't want to go too far but press it just a little bit and then kind of smooth
around that ball I would say with your fingers so it is nice and smooth around and it's going
to have nice thickness to it and I'm using a eye pin to poke a hole at it so we can put
it through our main design and use it as a filler bead.
So before I put these guys in the oven and call it a day, I am going to poke a hole in
my cone beads.
This way when I put the actual eye pin through, the clay won't be distorted.
It is really easy for straight eye pins to come out of these beads so what I'm going
to do is I'm going to cut a short eye pin and kind of misshapen it, kind of like create
wiggles on it I would say.
See this is what I created, that way it will stay there nice and neat and I created the
hole because once we put this one through it, it might misshapen the bead.
I'm using some clay adhesive and pushing the eye pin through the bead and of course if
it misshapens a little bit, you can always roll it and try to get it back on shape.
It's clay, you can play around with it, that's the beauty of it.
So I transferred the earrings onto a sheet of printed paper and onto a baking tray.
I baked them in the oven for an hour at 275 Fahrenheit.
I'll show you guys what happens if you don't use the correct temperature.
This morning I was baking something, I made those egg in a hole sandwiches kind of things
and I forgot to change the temperature.
These were baking at 375, yeah, I'm surprised that I did not burn my kitchen down but use
the correct temperature, don't be like me.
But I finished up the earrings, I added the beads, the findings, this kind of reminds
me of the Chinese New Year.
They do really look nice, I really love the shape of these earrings.
I'm going to try and create a little collection out of it if I have time and maybe post it
on my website.
But thank you for staying until the end of this video, I really enjoy creating these
videos now.
Now that I have time, please do subscribe, like and share, it really helps out the channel
and I'll see you guys in the next one!
