Here’s a tried, true and inexpensive way to make firestarters, using common cosmetic items! DirtFarmerJay explains!
#fire #firestarters #firestarter #campfire
Buy your DFJ T-shirt, Cap, or Coffee Mug at https://www.dirtfarmerjay.com/shop
You can make firestarters for the fireplace, wood stove, emergency road kit, or campfire from two common cosmetic supplies: cotton balls and petroleum jelly. These firestarters ignite readily with a ferro-rod sparker, match, or lighter.
Because petroleum jelly is, well, petroleum, it repels water and remains easy to ignite. The more petroleum fuel is in the cotton ball, the longer it will burn. However, even a partially covered or saturated cotton ball will burn long and intensely enough to light tinder and twigs.
There are two approaches we’ve used to make these firestarters: cold and warm.
The cold method is simply working a large dab of petroleum jelly into each cotton ball using latex or rubber-gloved hands. Then each firestarter is put into a container of your choice. This can be a small tin, medicine bottle, jar, plastic bag, or plastic storage container.
This method tends to have the most fuel and burn duration, but they are messy and you will get some of the jelly on your hands when you use them. You can get around this by using some type of tongs to dispense the firestarters.
The warm method is to use a small glass bowl that can be used in the microwave oven. Place a large dab of petroleum jelly in the bowl, and microwave it in short bursts until the jelly is melted. You need to be cautious because the jelly is flammable. If you want, you could do the same thing using a double boiler where the top container is suspended either above or in boiling water. The point is, to be careful with this step. Proceed at your own risk!
Now that you have liquified petroleum jelly (it’s no longer “jelly” at this point!), you can dip the balls of cotton into the liquid and soak the bottom half while keeping the top part you are holding onto free of the fuel. After cooling, containerize them using the method of your choice. This is cleaner, but they will burn for a shorter time than the cold-method version.
If you want a great firestarter product you can buy, check out this episode where we reviewed wax-infused cedar sawdust “pucks” that have become our “go-to” around here for convenience, good economics, and great performance. You can check them out here:
https://youtu.be/eZ5MlvycAaI
JUST DO IT YOURSELF!
Instagram: https://www.instagram.com/dirtfarmerj
Facebook: https://www.facebook.com/dirtfarmerjay
[Music]
hey dirt farmer J here from dirtfarmer
j.com do you know that you can make your
own fire starters from commonly
available cosmetic items in your home
yep cotton balls and petroleum jelly hey
I'll show you
[Music]
how Dirt Farmer J here from dirt farmer
j.com yes it's true you can make your
own fire starters using commonly
available cosmetic products in your home
petroleum jelly and cotton balls now why
do you need fire starters well for a
couple reasons if you're going camping
or emergency supplies in your vehicle
you always want to be able to start a
fire if you're stranded someplace to
keep warm or to attract attention or
just regular wood burning stoves and
that sort of thing like we use right
here in our own shop now here's the
thing to remember petroleum jelly also
which is commonly known as Vaseline
that's a brand name
is petroleum meaning that it is
flammable and where does petroleum jelly
come from well it's part of the refining
process of crude oil after some of the
lighter more volatile oils are taken off
including things that jet fuel a diesel
gasoline kerosene all those others you
get more and more solids and this is a
highly refined and stabilized product
that is used commonly
around the home now because it is
petroleum though you need to be careful
with flammability and in this case that
characteristic serves us well for making
fire starters there's two methods you
can use to build these fire starters one
is a wet method one's a dry method to do
the wet method we're going to take a Gob
of petroleum jelly and place it in this
Pyrex type glass high temperature glass
bowl and melt the jelly in a microwave
and short burst then we're going to dip
this in there we'll show you that in a
moment the other method is the dry
method in which you simply take cotton
balls after putting gloves on and
swirling this in the petroleum jelly
really permeating the ball until it is
saturated now I'm not going to do that
simply because you can Envision it you
just need to put on some kind of latex
gloves then you're going to take the lid
off of this you're going to take cotton
balls and really work the jelly in or
spread a Gob on it and then work it
through it's very messy the advantage
though is there's more fuel on the
cotton ball and therefore it'll tend to
burn longer and once they're done we
simply put them in some kind of
container these are some take-home
containers and keep them safe that way
and pack them for where they are ready
to go to work when we need them all
right let's go ahead and move on to the
wet method the first thing we're going
to do here here is just get a putty
knife here and let's take out a very
sizable glob of petrolum jelly here and
put it down in our Bowl here I'm
actually going to put some more cuz I
want to make a full set of these so I'm
going to go
ahead take this and I'm going to go
ahead and run it in short burst in the
microwave until it's liquefied and then
we'll dob them in all right let me go
warm this
up okay we have now melted the petroleum
jelly and it took about 3 minutes to do
that in uh 30 second increments and it
kept monitoring but we now have fully
liquefied petroleum jelly it's no longer
jelly now what we're going to do is go
ahead and take cotton balls and we're
just going to dob them in soaking up the
bottom half therefore I don't need to
wear gloves and we're just going to do
this so I'll go ahead and and just soak
up put them in the container just as
fast as I can
[Music]
go I was able to make about eight uh
fire starters out of that if I wanted to
stretch it a little bit I could have not
soaked quite as much here we'll let
those solidify now and they are ready to
use a fire starter well let's see how
effective they are all right let's see
how effective it is I'm going to use one
of the ones we did earlier using uh the
dry method and let's just see how well
it'll light here I'm going to use a
Ferro starter the kind of thing that
used in an emergency kit that throws
Sparks and let's just see how well it
does there we go so you can see very
significant amount of flame that would
certainly give you enough time to be
able to build uh several Twigs or Tinder
around it and get a nice fire going but
suppose you don't want to go to all of
this trouble and you want to use a
ready-made product well what we use are
these pucks made out of paraffin wax and
Cedar sawdust and they ignite really
quickly don't believe me hey check out
this video where we show you how quickly
they burn and how hot they are and while
you're at it
check out this other video from our
catalog that YouTube thinks is perfect
for your interest we think you'll like
it too until the next time this is
dirtfarmer J from dirtfarmer
j.com