Hardware Store Hacks for Furniture RESCUE!

Thomas Johnson Antique Furniture Restoration
41 followers
8 Video Views·Jan 19, 2024
Tom Johnson of Thomas Johnson Antique Furniture Restoration in Gorham, Maine puts away the heavy machinery and uses some readily available products to spruce up a series of pieces. Tom has been restoring furniture professionally since 1979. Visit our website at http://www.thomasjohnsonrestoration.com, or write us at [email protected]. And for those on the west coast looking for custom framing, be sure to check out Tom's daughter's shop, https://www.emcollier.com (@emcollierframes on Instagram).
I'm Tom Johnson Thomas Johnson antique
furniture restoration in gorm Maine
there are many ways you can improve the
appearance of your furniture without
refinishing this is especially important
when it comes to family
heirlooms most of the techniques I
demonstrate here use products that are
readily available at your locally owned
hardware store so enjoy the videos and
your assignment for this weekend will be
to use these techniques on a piece of
furniture that's looking tired and
neglected good luck let me know how it
works out this is a nice little desk
it's not an antique it's an old
reproduction and it's been found in a
barn here in gorum it's been there for
many years and what I want to show in
this video I want to find out how good
this piece can look just using regular
consumer products that are available to
you at your local hardware
store with this particular piece the
first thing we're going to do is
[Music]
vacuum
I've assembled everything here I think I
need for the job and everything here is
available at your local hardware store I
have a a a commercial type de cleaner
Degreaser I have some bleach because I'm
going to uh clean the bottoms of the
drawers the back and everything with
this mild bleach solution to kill any
mildew that might be there
I have yellow Carpenters glue because
I've got to glue this drawer
together then I've got a scratch cover
which I'll go over with with hopefully
will hide any scratches and uh other
marks or scrapes and in that same vein I
also have these uh wax sticks and a uh
marker I have steel wool which I'll use
also to apply the scratch cover and uh
probably the uh beeswax polish
[Music]
also
[Music]
[Music]
[Music]
sh
did I uh mention that you need a clamp I
don't think so but you can get this at
your local hardware
store
you can wipe off the excess glue with
just a damp
rag all right so the next thing I'm
going to do is go over this uh with the
magic marker uh the scratch cover is
going to take care of a lot of minor
things but there's some things I've seen
that I want to hit with the marker first
like there's just some light edges along
here along
here now you're thinking Tom's not going
to paint that raw wood where the veneer
is missing well yes I am uh remember
we're only using tools from the hardware
store and I will stain that and at any
later date it can be
repaired now I'm going to use a scratch
cover I think the scratch cover is
basically a oil polish uh with stain in
it the theory being that the stain is
only going to affect the little minor
areas the little scratches where uh the
Finish is gone and I want to use a 4 o
steel
wool to apply
[Music]
okay
now I'm going to wipe this down this is
an an Old Rag that's sort of saturated
in oil polish coffee can and I use it
for just this
purpose okay I've let the scratch cover
dry for a couple of hours and now I'm
going to uh wipe it down really well
with just some regular uh paper
towels you can see all the stuff that
comes
[Music]
off all right you can see you know how
much polish scratch cover polishes on
these paper towels I'm going to take two
more I really want to make sure that all
the excess scratch cover is gone I want
to wipe it you know I'm still seeing a
little bit that's really good though
it's coming up it's almost gone now
here's a little area on the drawer
actually two little areas here that the
uh scratch cover didn't take care
of so I'll just go back with the
marker you know I think that this uh
little ding on the drawer front here
here uh might benefit from use of the
wax
stick a wax stick will uh rarely make a
you know defect go away but it
definitely uh takes the curse off of it
and it's a great
Improvement I just realized I reglued
the drawer but never tried it back in
the
cabinet um not bad for the first dry
it's a little tight there at the end but
you know I'm not inclined to do anything
about that right now this thing has been
in a barn for years and uh it just may
need to dry out a little bit
so let may give it away but in the
meantime what I will do is wax
everything
and what I mean is by Wax everything I
want to wax the drawer
Runners I have a just a stub of an old
candle here now you can't buy an old
candle stub at the hardware store but
you can buy a new candle or paffin wax
so I want to wax everywhere that wood
touches
[Music]
wood so the final step here will be to
go over it now with the uh beeswax
polish and I really like this polish it
leaves a really nice uh Sheen and seems
to keep that Sheen for a
while a lot of times I'll use this I'll
use the full out steel wool like you saw
me use with the scratch cover but I
already did you know I did the steel
wool so now I can just apply it with a
rag now turned the rag around down to a
a nice uh clean area relatively clean
area of the rag I want to make sure I
wipe off all the excess polish I'm going
to leave it laying on the
surface all right I'm going to uh let
this dry during lunch and then I'll give
it a final uh a final
buffing so there you go nice little desk
Little Fall front
desk very useful little piece of
furniture if if you remember it came out
of a barn covered in filth and we
decided to experiment see what happened
just with these very common items from
the hardware store cleaner scratch cover
and steel wool wax stick marker and then
the final beeswax
polish and uh yeah I think it looks
pretty
good
I'm Tom Johnson Thomas Johnson antique
furniture restoration in gor main this
is a nice antique card table
uh it's actually in process I've been
doing a lot of repair work to the veneer
on the apron but this video will concern
itself solely with one little aspect of
the top this top although it kind of
needs refinishing it's not going to be
refinished I'm just going to clean it
and wax it but there's a defect a
chipped area in this front feeding and I
want to show you how to fill that in and
smooth it out without sanding and
minimizing any disruption to the
rounding
area
I've got a little water in a cup and I'm
going to dip my knife in the water and
smooth this putty out maybe a little too
soon I'm pushing this too fast because
I'm making this video but I'm going to
you got to let this Harden like for 5
minutes or so you can't let it get too
hard until you're done shaping it so I'm
waiting for this to harden just a little
bit not completely hard I'm continuing
to smooth it out with my finger with
water on it I may be a little impatient
because I'm making a video I'm going to
stop and let this sit for 2 minutes I'm
going to watch the clock and let 2
minutes go by I'm going to keep this
groove of the beading clean cuz I don't
want to sand it you can see this area
here kept moving when I was trying to
form it I'm just going to press it in
gently and let it hard and that kind of
concerns me if it doesn't want to stick
there there I may have to redo this now
I'm going to use a scotchbrite gray pad
with some
water I'm going to very
gently smooth this out it's getting
harder so I'm pressing a little bit more
with the scotch bra pad I want to see
the excess around that defect go away
I'm seeing clearly defined edges
here so I know I'm getting it right down
to where I want it
[Music]
it feels really
smooth now I'm going to get a chisel and
try to square off the front
edge now back to the gray
pad sometimes it's a little hard to tell
if you've got off all
the excess and of course I can sand the
putty just a little bit I've got it
shaped pretty well I've got it down to
really really close to where I want to
be if not there I'm I think I'll let
that Harden and maybe just clean up this
Edge a little bit with some really fine
sandpaper now I've let this dry uh I am
going to sand it uh a little with some
100 and then 150 I got to smooth this
out and get it really
round now I'm trying to just sand the
putty and absolutely minimize how much I
hit the surrounding wood I got it pretty
smoothed out before I started sanding
I'm really just trying to achieve a
better round over okay I think I've got
it
as good as I can I'm finishing it with
150 now I'm going to brush a uh just a
thin coat of shellac on everything so I
can see exactly what the colors
are okay I've let this dry overnight now
I'm going to sand it to just slightly
with some 500 and then touch up and see
if I can get the color
right this is a analine d
stain okay I've let the stain dry for
about 45 minutes and now I'm going to
seal it with a little more
shellac
okay I've let the shellac dry just for a
couple hours and I'm not going to put
any more on I just wanted to seal in the
staining and what I did and so now I am
going to uh go over this top with the
beeswax polish and some steel wool This
is 40 steel
wool and I use a liberal amount of the
Polish and I'm just applying light but
even very even pressure or I should say
medium pressure but
even I can feel stuff that's on the
surface grit dirt whatever it is you can
feel it giving way and the wood just
looks
beautiful now this is a scratch that's
you know below the
surface I think it's getting in there
though and
if that whiteness doesn't go away I'll
put some stain on it but there it goes
it's it's coming but I'm still keeping
my FL hand flat and I'm keeping it even
don't go after a spot with one finger
you've got to keep it
even I think the wax has gotten in there
and it looks great
now I'm going to go gently here where my
repair is
and so after the steel wool I just go
over it with a rag to uh already
saturated with Polish but it's just
helping to even it out you want to
really ultimately have as little amount
of Polish as
possible and then I use a a paper towel
to give it this final
buffing so as you remember this top it
looked pretty rough but we just you know
I just polished it with the beeswax
polish and steel wool it looks great uh
one problem it has this wicked chip out
of the front edge here and I was able to
fill that with epoxy putty without
really disturbing the surrounding
surface and uh may not be perfect but it
looks pretty
good
I'm Tom Johnson Thomas Johnson antique
furniture restoration and gorm Main this
is an old storage chest uh it must be
19th century uh Victorian at least
judging by the handles which appear to
be original it was in the basement of a
building for well over 40 years uh and
it was locked I had to take the back off
of this to get to the hinges and get
this top off of here there was nothing
inside and I'm going to repair and
refinish this top but the purpose of
this video is to show how you can take
an an old case like this filthy dirty
there's paint spots on it there's a raw
wood showing and I want to show how to
clean and rejuvenate the Finish without
ref finishing uh the first step is going
to be just to give it a good cleaning so
I'm going to put a a eighth of a cup of
tsp into about a gallon of hot water and
then because this piece has been in the
basement I'm just going to put a sco of
bleach in there kill any milde so I'm
using a gray uh scrubby Pad but I'm not
applying a lot of pressure I'm just
going very gently and always start at
the bottom and work your way up I think
that helps prevent
streaking very lucky already because I
see some of the uh this cleaner seems to
be taking off uh the white
spots now this spot's not readily coming
off uh I may work on a little bit later
I may put a little goof off or something
on it I'll come back to
that all right it's
uh it's all cleaned uh the wood looks
great now I'll let it dry overnight all
right I let this dry overnight and uh it
looks great except that uh I've still
got one piece of paint right here that
didn't seem to come off when I washed it
with the water so I've got this product
that's made to remove paint dried paint
I'm going to apply a little bit and
let's see what
happens so I've continued dabbing this
on now I'm going to take my small
scraper and just scrape very light
I'm just trying to scrape the the crust
sort of off the top of this
thing so now I'm going to use the Oil
and Beeswax polish and some 40 steel
wool and I'm counting on the
Polish to darken up the areas that were
a little white cuz they were bare
wood now to get into these corners and
stuff I've got a stencil brush I just
got at a art supply store so I put just
a just a little dab of Polish in the
can so I've let this polish sit on here
for about an hour and now I'm taking my
polish rag which is already impregnated
somewhat with the same polish and giving
it a really good wipe down and then I'm
going to hit it with a dryer rack just
for a final
buffing so there we go this uh 19th
century storage chest it's Cedar uh I
very purposefully did not refinish it I
just cleaned it gave it the Oil and
Beeswax polish and uh it looks pretty
good
