I could get lost in IKEA coming up with cool ways to use their products in my home, and you know I especially love putting my own spin on their items! Here are my four latest IKEA hacks: a display column made from side tables, a candelabra and lamp both made from coat racks, and a side table made from a cutting board and drying racks. They can be made by people of any skill level with minimal tools. Can’t wait to see you recreate them in your homes!
T H A N K Y O U Thanks so much for watching and I hope you enjoyed. Leave any future video ideas you would like to see in the comments below and don't forget to subscribe!
[Music]
hi everyone welcome back to the channel
this is my first video technically that
I'm filming for the new year now the
video that I shared before this one
which came out before this one is the
bathroom makeover but I actually filmed
that back in September with
architectural digest so kind of came out
at a little bit of a later time but I
was so excited to share that and if you
have yet to see that bathroom makeover
you have got to check it out it is
probably one of my most extreme make
overs in this house to date but today we
are keeping it a little more simple and
a little bit more recreatable in a sense
we are creating some Ikea hacks which is
a continuous series I have done here on
my channel for many years this table
right here is one of the four so that
should give you an idea of some of the
projects in this video so we are going
to dive on into our first I have four so
definitely stay tuned for all four and
let's get
started for our first project we are
using the Bon cigarette coat rack which
is actually a new item from Ikea and
when I saw this coat rack I actually
loved it as the coat rack but I had a
vision to turn it into a candleabra so I
picked up some of these candle cups on
Etsy and then also some of this quick
weld epoxy which is a steel reinforced
epoxy so essentially it's like a welded
joint and you mix up both sides equal
parts with the little popsicle stick
that it comes with and then I'm adding a
generous amount of this mixture onto the
bottom of each of the little candle cups
and these are going to go directly onto
the coat rack itself so so I assembled
it just as you would per the
instructions and the actual assembly of
this kind of candleabra is super simple
you're just going to place each of the
candle cups with a good amount of that
welding adhesive on the bottom side I
used some tape just to hold them in
place some painters tape and added that
on the left and right side just two
pieces because it does need a full 24
hours to fully cure down and I left this
to cure overnight once I got all of them
in place and the following morning I did
a quick check just to see as you could
see I kind of wiggled that around to see
if it was going to move or not and it
was really bonded on there so I pulled
off all the tape added some candles and
turned this into a
[Music]
candala this second project here is
probably one of my favorite Ikea hacks I
have ever created to date I absolutely
love this I'm using one of these cutting
boards here along with four of these
drying racks that you could find in the
kitchen section at Ikea to create a
really cool side table and whenever I
share Ikea hacks you guys are always
asking how I come up with these ideas
and this was one of those projects that
I literally was in the kitchen section
at Ikea holding random items up together
and it just popped into my head I came
home and filmed the project so
essentially I'm using each of these
racks as the legs so I placed it on
either side and used a pencil to Mark in
the little juice Channel that's on The
Cutting Board where I'm going to be
drilling the holes and I actually used a
drill bit that was just a little wider
than the actual thickness of the grate
on the drying rack but not much bigger
because I actually didn't want to have
to use any glue or adhesive to kind of
put this piece together I really wanted
it to almost be like pressure fit
together so I went around and drilled
the holes all the way around the
exterior of The Cutting Board I did all
four sides of
[Music]
it I used a little bit of sandpaper to
get off any of those little kind of
shavings that were left from the drill
bit and then some feed and wax is the
best product to just shine up and polish
any wood I use this on absolutely
everything if you've watched my channel
in the past you would know I use this on
all my furniture I use it whenever I'm
doing a wood project a DIY it just
always brings out the Grain and kind of
refreshes the wood a little bit so I
added that to The Cutting Board and then
started slipping in the little drying
racks on either side and as you could
see they're pretty much pressure fit
into the side and the pressure itself is
what holds the leg sturdy upright so I
was shaking it here to show you how
sturdy it actually is and the design and
just overall look and feel of this table
once all the legs are add it in it's
just so incredible and if you had to as
well you can also use pliers to kind of
force it up towards the top uh we had to
do that on one of the sides as well so I
pressed them all in flipped it upright
to reveal our $40 side table that has
the coolest edgy feel to it and I also
love how it introduces that silver tone
which is such a trend this
year
[Music]
clearly I had this love for coat racks
when I went there because I also ended
up picking up this ecar coat rack which
is a new find from Ikea as well but I
saw potential to turn this into a floor
lamp and that is exactly what we're
doing so I grabbed some black black
chalkboard spray paint and brought the
base of this coat rack outside this is
essentially how it would look in your
living room and I think this was like
$15 or so now the only color they had in
stock was this kind of gray green color
but that was not the exact Vibe I was
going for so keep in mind you could
spray paint it however you'd like so I
ended up spraying mine with a matte
black spray paint and in the light
section I found this hesia glass shade
and it's kind of like a smoke glass
which I liked a lot so I ended up
wanting to use this as kind of a free
floating shade in the top of the coat
rack so I set that coat rack back up and
then I ended up ordering a light cord
but I accidentally ordered this one that
looked like a rope I wanted it to look
more like this brown one that's from
Marie's bedroom but I accidentally
ordered the one that looked like a rope
please disregard the farmh Housey rope
feel of this cord because that's not the
exact Vibe I was going for but then you
just pop it in the top and that finishes
off your floor lamp the cord just
dangles down and I think that kind of
adds an interesting element to the
[Music]
piece
[Music]
and I had to save the best for last we
are using these $10 Lac side tables that
I've always asked myself does anyone
really purchase these from Ikea because
they are so small and I feel like almost
seems like a kids table and the hardest
part of this entire project honestly
might be assembling the three tables
from the start these tables require a
lot of forearm strength you have to
twist the legs in and I will tell you
it's quite challenging but once you get
them all assembled you're going to stack
them on top of each other so that it
looks something like this because we're
going to be turning this into a column
and I also use these little brackets
that I got at Low's they're just little
90° L brackets and I'm using these to
attach the tables to each other so I'm
adding one of these at every single leg
in connection point to the top of the
table underneath and once those are all
connected it should look something like
this but also be of course secure and
one solid piece now this plastic sheet
I'm using here is called polywall you
can get this at Low's I use this to
create the range hood in my kitchen if
you remember and I used it because it's
flexible but it's also really thick it's
like a plasticky material and it comes
in a 4x8 sheet so what I started off by
doing was thinking that I could actually
just bend it around the entire exterior
but sadly that did not work as planned
so I actually ended up measuring each
side which of course all four sides were
the same and I transferred that
measurement to our plastic sheet and
then just used some scissors to cut that
out and once you have your first one cut
out you can actually use that as a
template so just place it on top and
Trace out your next one use your
scissors to cut that out but this
plastic sheet essentially is just a lot
easier to use a lot more user friendly
than having to cut out wood I personally
hate having to cut out wood for a
project so whenever I can get by with
something like this I think it's so much
easier and I just used my electric
staple gun which is a great investment
if you do not have one to secure down
the plastic and the finish that we're
using is actually called feather finish
which is essentially like a concrete
finish that a lot of people use on
tabletops or countertop now this is very
similar to that concreta material I used
in the bathroom however this is kind of
more of a widely known product I believe
you could purchase it at Lowe's and Home
Depot I got mine at Lowe's you just mix
it up with water per the directions you
use a Trel and you just Trel this on
whatever you were doing and it's kind of
giving you that micro cement finish like
a nice concrete look so I am going to be
adding this on the exterior of our
column to cover up all the Staples all
the joining of the plastic edges is
going to be covered by that cement as
well and you could do as many coats of
this as you like but I actually only did
one thick coat and it looked incredible
in the end and another thing I love
about this is that the column in the end
only weighs about 15 lb so it's super
easy to move around your house if you're
someone that likes to restyle often or
if you're even making this for like
Photo set or something but a real
concrete column of course this size
would probably be upwards of 200 300 lb
and be quite expensive so I love how we
were able to achieve the look for quite
a bit less and we're just using the LA
faes or tables as forms and then kind of
our plastic sheeting as a coat over the
top and then we're finishing it off with
the micro cement which justs so great
once it ends up drying down I just let
mine dry overnight completely and then
once it was done brought it outside used
a nice 180 grit sandpaper to sand down
the top surface it also kind of lightens
it up a little bit and that is how I
finished off this concrete
column
[Music]
those were my Ikea hacks for you today I
hope that you enjoyed this video as much
as I enjoyed creating it for you and let
me know if you guys would like to see
more Ikea hacks throughout 2024 leave a
comment below especially if there's any
specific types of projects you want to
see whether it be home to Decor or
furniture or storage I can definitely
make sure to implement those into the
next video and if you not already make
sure to subscribe to the Lone Fox
YouTube channel you can just click that
red subscribe button it is somewhere
around the video and then once you click
that also make sure to click the Bell
icon next to it that way you can
notified every time I upload a brand new
video and of course I'm always sharing
more content over on Instagram and Tik
Tok both of which are just Lone Fox home
I'll put it on the screen right there
for you but I will catch you guys all in
my next video which is probably going to
be diving into a new makeover here at
the house and if you have not already
checked out the last makeover of the
small bathroom definitely do so it is
such a great watch have an amazing rest
of your day and I'll catch you in the
next one
[Music]
bye