像摺紙一樣做個拎包，方法簡單，包形漂亮 手工布藝 #DIY快樂手工

Hello, everyone, welcome to Happy Handicraft. Today, let's make a bag like origami. Is the side of the bag particularly characteristic? I pressed 60 grams of non-woven lining on the surface of these two pieces of material We stacked the front and back of the material Its length is 54 centimeters The height is 40 centimeters We sew a circle of thread and leave a reverse opening here There are four 4 centimeters without sewing distance that is 4 centimeters from the raw edge It's all the same size Turn the material to the front, we fold the material in half, this is the center point, 5 centimeters, we fold it.It is folded to the corner here, and then it is the same here, and it is also 5 centimeters.We sew a narrow 5mm edge here and here at the fold, and we do the same on the other side. Next let's fold it again We fold it like this This point is exactly the reserved opening of 4 centimeters left before Here it is folded to the end and it is the same on both sides Then we prepare two ribbons. The length of my ribbon is 45 centimeters and the width is 2.5 centimeters. We put one end of the webbing into our 4 cm reserved opening, and this end on the other end. Then sew a narrow edge of 5 mm in this way. The other side is also folded in the same way. Make this ribbon and tell you that this side of my strip is the front side. We fold the material in half and sew it on, two sides with two bottom corners, and the width of the bottom corner is 7 centimeters. Finally, we need to nail a snap button in the middle of the bag. I measured it just now The size of our bag is a trapezoid This side is 23 centimeters the lower side is 27 centimeters and the height is 21 centimeters The thickness of our side is 8 centimeters That's all for this video Thank you for your precious time to watch my video Remember to give me a like See you next time