Radiation form the Hertz dipole

nptelhrd
41 followers
1 Video View·Dec 6, 2023
Lecture series on Transmission Lines and E.M Waves by Prof. R.K.Shevgaonkar, Dept of Electrical Engineering, IIT Bombay.For more details on NPTEL visit http://nptel.iitm.ac.in
In the last lecture we derived the magnetic vector potential for the Hertz Dipole. We
saw Hertz Dipole is the basic unit on which we can develop and we can find out the fields
for more complex current distributions. So the analysis of Hertz Dipole is very important
because once we understand the fields developed by the Hertz Dipole we can always find the
electric and magnetic fields generated by any other current distribution.
So we had got this Hertz Dipole which is nothing but a small current element and from there
we got the magnetic vector potential. We considered a coordinate system and the Hertz
Dipole is oriented in the z direction and from there we found that the magnetic vector
potential at any point in the space will be oriented in the same direction as the current
element that means everywhere in the space we will have the magnetic vector potential
which will be oriented in z direction.
So the magnetic vector potential at a distance r from the origin essentially is given by
this which we wrote explicitly as the z component which was essentially given by that.
Now since we are talking about the spherical coordinate system and we are going to investigate
now the fields in the spherical coordinate system essentially we have to convert this
a z component in the appropriate spherical components that is the r component and the
theta component. So note here if this is the radius vector this is the direction which
is theta direction, the radially outward direction this direction is the r direction and phi
direction is perpendicular to the plane of the paper which is going this way.
So this vector potential does not have any component in this direction perpendicular
to the plane of the paper that is 90 degrees with respect to this. So the vector potential
in the spherical coordinate system would have two components the r component and the
theta component. So since this angle is theta this angle is also theta so this component
will be a z cos of theta this component will be negative of a z sin of theta so you will
have theta component which is minus a z sin theta and r component which is a z cos theta.
So from here we get now the component for the spherical coordinate system so I have
from here a r is equal to a z cos of theta a theta which will be minus a z sin of theta
and a phi in this case is equal to zero where a z is essentially this quantity so if you
put the whole thing together that is this quantity a z.
Now once we have the knowledge of the vector potential then we can go now to the definition
of the vector potential and from there we can find out the magnetic field we can use
mu times h which is b is equal to del cross of a or the magnetic field h is one upon mu
del cross a. So once I know these components of the vector potential a r a theta a phi
then I can substitute into this and I can get the magnetic field.
Write in this curl explicitly this is equal to one upon mu and I can write the curl in
the spherical coordinate system which is one upon r square sin theta so this is equal to
determinant r r theta r sin theta unit vector phi d by d r d by d theta d by d phi a r r
a theta r sin theta a phi. Now since the current element which we have got here is symmetric
in the phi direction where it appears same no matter from which direction we see only
when we see in different direction in theta the element will appear differently.
So if I see from this direction in theta it will look like a line when I see from the
top it will look like a point and so on. So we have a theta dependence for this current
but there is no phi dependence because it appears symmetric from all directions. As
a result this quantity d phi d by d phi is identically equal to zero in this case and
we also have seen that the phi component of the magnetic vector potential is also zero.
So substituting now into this we get the magnetic field H that is equal to one upon mu r square
sin theta determinant r r theta r sin theta phi d by d r d by d theta d by d phi is zero
then the r component a r which is a z cos theta so this is a z cos theta d by d phi
is a z cos theta the theta component is minus a z sin theta so this is minus a z sin theta
and the phi component is zero so you get this is zero.
So the vector magnetic field essentially is given by the determinant which is this. Now
it is immediately clear that since these two elements are zero here the r component and
the theta component are identically zero. The only component which we will get will
be corresponding to the phi component which will be d by d r of this quantity minus d
by d theta of this quantity. So essentially what we get from here we get H r is equal
to zero, H theta is also equal to zero and H phi equal to one upon mu r d by d theta
d by d r of minus a z sin theta minus d by d theta of a z cos theta from here d by d
r of minus a z sin theta minus d by d theta of a z cos theta so this is the phi component
of the magnetic field.
Substituting now for a z from here a z is this quantity and taking derivatives with
respect to r and theta we can get the magnetic field phi component which is equal to I zero
d l e to the power j omega t minus j beta r sin theta d by d theta of a z cos theta
upon 4 pi r or I can take r inside the bracket this will become j beta upon r plus one upon
r square. So the Hertz Dipole essentially generates the magnetic field which are phi
oriented that means the magnetic field essentially are going round this current element. So no
matter where you go in the space essentially they will be spiraling around this z axis
because everywhere they are going to have the phi component.
So magnetic fields as you would have got suppose this current element was of infinite length
we would get the magnetic field from the Ampere's law which will be like the loop around this
the same kind of magnetic field is generated by this current element also. Once we get
the magnetic field then we can go to the Maxwell's equation and now we want to find
out the electric field not at a location of the source but somewhere in the space where
there are no charges or no sources so essentially we can substitute the magnetic field in the
source free Maxwell's equation and then find out what is the electric field.
So we can take this magnetic field now and substitute into the source free Maxwell's
equation which is del cross H that is equal to j omega epsilon times E and since I know
H I can find out E so the electric field now at the observation point that will be equal
to 1 upon j omega epsilon del cross H.
Again I can use the determinant in spherical coordinates so this quantity will be 1 upon
j omega epsilon 1 upon r square sin theta r r theta r sin theta del cross H. So this
will be phi d by dr d by d theta d by d phi which is zero because we have seen earlier
that there is a symmetry in phi so this quantity will be zero and now we do not have a component
which is H r component for the magnetic field there is no theta component for the magnetic
field the component which we have is only phi so H r is zero H theta is zero so I can
substitute this quantity is zero first this is zero this is zero and this is phi.
Now again simplifying and taking out the component so the r component essentially will be d by
d theta of H phi and this quantity theta component will correspond to the derivative of this
quantity d by d by dr of H phi.
So now just taking this derivative and separate out you get the component E r that will be
equal to I zero d l cos of theta e to the power j omega t minus j beta r upon d by d
four pi omega epsilon beta upon r square minus j upon r cube and theta component E theta
will be equal to I zero d l sin theta e to the power j omega t minus j beta r upon r
cube minus j beta r upon four pi epsilon j beta square upon omega r plus beta upon omega
r square minus j upon omega and the phi component of the electric field is identically zero
in this case.
So now note here the magnetic field for the Hertz Dipole will be going around the z axis
which is like that but for the electric field we have two components one is the r component
which is like that and other one is the component which is in theta direction which is like
this. So depending upon the location this electric field direction will be changing
the magnetic field direction will change only in this plane which is parallel to the
x y plane because it has only the phi component.
Now up till now the derivation is very straight forward essentially what we did we took the
magnetic vector potential substituted into the Maxwell's equation found the magnetic
field once we have the knowledge of magnetic field we again substituted into Maxwell's
equation and we got the electric field. Now we try to look at these terms which we have
got various terms into the electric and magnetic fields.
So if I look in general the field expression the H phi and these two components E r and
E theta I notice there are three types of field which are generated by the Hertz Dipole
depending upon the variation of the field as a function of distance. One variation is
1 over r other variation is 1 over r square and the third variation is 1 over r cube same
is for magnetic field we do not have 1 over r cube term but I have 1 over r square and
I have a term which is 1 over r.
We know that from the Ampere's law that if I have a current then it produces the magnetic
field and the magnetic field has a variation from a current that varies as 1 over r square
so I know this term which is varying as 1 over r square is same as what we used to get
from the simple Ampere's law. This phenomena was the induction phenomena so if you had
a current it would produce the magnetic fields around it and that magnetic field had a variation
which was 1 over r square so this term which varies as 1 over r square we call as the induction
term.
So we have these fields we denote them induction term because it was the magnetic induction
I had when the current was flowing in the wire. However, if I look at the electric field
here I have a term which varies as 1 over r and I also find a term which is 1 over r
cube. Now this term which is 1 over r is a term which we have not seen before this is
a term which is the new term this term beta upon r or same term here which is varying
as 1 over r and that is the term essentially we will try to interpret in detail because
that is the one which is contributing to the radiation.
So firstly we have three types of fields 1 over r variation, 1 over r square variation
and 1 over r cube variation. This term as we already saw we call as the induction term
or induction fields. The 1 over r term which is the new term that is the term which we
have called as the radiation field and the third term which varies as 1 over r cube we
call as the electrostatic field and we will try to understand why the terms are called
that way. The induction term is very clear because that is the way the magnetic induction
was due to a current. So 1 over r square field is a very familiar field we have seen it earlier
and using the same understanding we call that field as the induction field.
If I look at this field which is varying as 1 over r if I look at the expression here
this is the quantity which is beta square upon omega and as we know beta square is nothing
but omega square mu epsilon that is what we have seen earlier. So this quantity whatever
we have that varies as omega square mu epsilon upon omega r so this field 1 over r that varies
as omega mu epsilon upon r that means this term which is varying as 1 over r it is proportional
to frequency so this quantity 1 over r term this is proportional to omega.
If I look at this term here which is beta upon omega r square since beta is proportional
to omega this term is independent of omega and this term is inversely proportional to
omega so this field induction field is independent of omega and this field electrostatic field
whatever we are calling which is varying as 1 over r cube this is inversely proportional
to omega. So as we go to the lower frequencies this is the term which is going to dominate
this term is independent of frequency so it is always present and this phenomena is essentially
high frequency phenomena.
So what that means is that this field whatever is the radiation field is a high frequency
phenomena essentially and that is what is the radiation that when we go to the extremely
low frequencies there is no radiation as I go to higher and higher frequency for the
same current I 0 into dL we will have now this term dominating more and more as the
frequency increases that means for the same current amplitude if the frequency is increased
the dominance of this field increases. So radiation becomes stronger and stronger for
the same current as the frequency increases and that we understand from our basic argument
which we have put for the radiation that as the frequency increases the rate of change
of current increases that means the charges get accelerated decelerated in a more way
and because of that we have more radiation field.
So this relation that the radiation field is proportional to omega agrees with what
basic understanding we had put forward for getting a radiation from the current. This
variation also is okay because this is the field which is even generated by the DC current
so its independency for omega is also understandable. What is the origin of this field which is
varying as one upon omega that means this field is going to be more dominant as we go
to lower and lower frequency as a term we are calling it here electrostatic field that
means this must be related to some kind of charges which are there but we have not put
any charges anywhere in our analysis we simply assume there is a current I which is flowing
into this current element and then we investigated the fields which are induced because of this
small current element.
However, if you look at very carefully now one can ask a question this is my current
element let me enlarge it little bit current is flowing into this current element where
does the current go the current flows into this so one half cycle the current will be
flowing upwards in the other half cycle the current will be flowing downwards and there
is no close path now for this because these things are closed by the fields so essentially
when the current is flowing in this direction the electrons are moving downwards positive
charges effectively are going upwards so when the current goes upwards there is accumulation
of charge on these two points on the two ends of the current element so when the current
flows this way the positive charges are moving here and the negative charges will be moving
in this direction so in one half cycle the positive charges will get accumulated at this
end and the negative charges will get accumulated in this end.
In the next half cycle when the current reverses direction the negative charges will get accumulated
here and the positive charge will get accumulated here so essentially this current flow which
we are talking about which is time varying is equivalent to having a time varying charges
which are accumulated at the two ends of this current element which is saying that I am
having a electric dipole whose charges are changing as a function of time and they essentially
give you this current in this element so essentially you are having a dumbbell of charges
equal and opposite charges which are located at the two ends of this current dipole.
So as the current is oscillating positive and negative this dumbbell essentially is
oscillating so it is positive next half cycle will be negative and so on so essentially
we are having a oscillating dumbbell which is equivalent to the current flow which we
are here. So though we did not say explicitly when we started with this current in this
small current element that there are charges in this system we simply started with a current
flow in this small current element these charges will get accumulated at the ends of the hertz
dipole and then they will produce their field which will be electrostatic field.
So if I consider this electric dumbbell and now find out what is the field produced because
of these charges I can find out some observation point which is very close so let us say I
take some point here some point here I put some test positive charge so I will get field
which is like this the field will be like this so resultant field will be always the
vector sum of these two fields which is produced because of these two charges.
One can show that this field now varies as 1 over r cube where r is the distance from
the center of this dipole so this term which we are getting here 1 over r cube term is
essentially electrostatic because this field is produced by the dumbbell of this electric
charges which are separated by a distance dl. So if I just without getting into the
time varying thing if I consider two equal and opposite charges separated by distance
dl and find the field produced by these charges then I will get the resultant field which
will vary as 1 over r cube and that is what is the field which we have got here.
Why this field then varies as 1 over frequency because if the frequency becomes smaller and
smaller for the same current more and more charges get accumulated here because the charge
essentially is integral of the current over time. So if I have a time period which is
very large for the same current amplitude I will be accumulating charges over the time
period and as the time period increases I will get more accumulation of the charge.
So as the frequency becomes smaller and smaller the amplitude or the amount of charge which
will get accumulated on the ends of the Hertz Dipole will go on increasing and one can see
that when you go to frequency which is dc the current will always flowing upwards and
then if I take as a steady state in finite time these charges will go to infinity.
So as the frequency goes to zero this field essentially blow to infinity because in steady
state there will be infinite charges which will be resting on the two ends of this dipole.
So this nature that the field which we have got here is because of the charge which is
now the collection of the charges which are due to the current should vary inversely as
the function of frequency because lower the frequency that means more accumulation of
the charges and higher will be the field because of this electrostatic charges.
So this field therefore then we call electrostatic field with this field we call induction field
and why there is no 1 over r cube variation for the induction field because there is no
magnetic charge accumulation. So we get a variation which is 1 over r square which is
same as the induction field and we get a field which is 1 over r which is the one which is
the radiation which should contribute to the power flow as we will see little later.
So this field is the new field which the magnetic field has there is no equivalent of 1 over
r cube term here because there is no accumulation of the magnetic charges. For the electric
field we have accumulation of electric charges and because of that we get a field which will
be electrostatic field and that will vary as 1 over omega.
So these three fields now the radiation field, the induction field and the electrostatic
field will be generated by the simple dipole hertz dipole. Our interest however is only
in this field because we are investigating now only the radiation field. So we will try
to only take that component of the field which will be varying as a function of omega.
So what we conclude from this analysis is that you take any time varying current the
time varying current is going to generate three types of fields one which will vary
as 1 over r and this field will be linearly proportional to the frequency, the other field
which will be varying as 1 over r square and this field is independent of frequency and
third one is the electrostatic field which will vary as 1 over r cube and this field
will vary as inversely proportional to the frequency.
Similarly one can see from the expression for these fields that all these three terms
become equal. So I can take the magnitude of this term and make it equal to this. For
the same distance even this term will become equal to this. So if I take a distance from
the current element where these terms will become equal so I get a distance beta square
upon omega r equal to beta upon omega r square where beta will cancel, omega will cancel
r will cancel. So from here I get r is equal to 1 upon beta which is nothing but 1 upon
2pi upon lambda. So this is lambda upon taking approximately the magnitude of the current
pi 3.14 so these are taking approximately this quantity as 6 we say that approximately
at r equal to lambda by 6 these three terms will become equal in magnitude wise.
So we have if I go from the hertz dipole a distance lambda by 6 approximately then the
radiation field, the induction field and the electrostatic field would be equal and as
I go less than lambda by 6 this term will increase this will increase further and as
I go beyond lambda by 6 this term would have died down rapidly only term which will survive
will be this term. So if I plot this now as a function of distance the different fields
so this is E magnitude I am plotting as a function of distance I will have three types
of fields one is the electrostatic field which will be like this, other will be the induction
field which will be like that and third will be the radiation field which will be like
this and this is the point which is lambda by 6 approximately or lambda by 2pi to be
where these three fields are going to be equal so this is 1 over r, this is 1 over r square
and this is 1 over as we see as we go to lower and lower frequency this is the term which
will dominate.
So if I go very close to the hertz dipole essentially the influence will be only the
electrostatic field if I somewhere in between then I will get the induction field and if
I go very far away from the dipole very far away means much much larger compared to lambda
by 6 then practically the radiation fields will be present in the in the medium. So now
this distance lambda by 6 is now the reference point and on the basis of this distance with
respect to this I can now divide the field into two categories.
So if I go to a zone which is very short compared to lambda by 6 I call those fields as the
near fields and those fields will be essentially dominated by the induction and the electrostatic
field whereas if I go to a distance which is much larger compared to lambda by 6 then
the field which will be dominated will be only radiation field and I call that field
as the far field. So now depending upon the distance I now classify the fields so we say
near field this for r much much less than lambda by 6 and then we have fields which
are called the far fields which will correspond to r r much much greater than lambda by 6
lambda by 6. Ideally if you want only 1 over r term which is the radiation field then we
should go to a distance almost tending to infinity where 1 over r square and 1 over
r cube field would have died down to a substantially low value and I will get a field which is
only 1 over r which is the radiation field.
So basically we see now something interesting and that is if I go now very close to a to
the hertz dipole we have a term which is 1 over r square and 1 over r cube so I will
have a component which is this component Eθ I will have a component which is Er because
it has term r square 1 over r square and 1 over r cube the magnetic field will have a
term which is 1 over r square but if I go to the zone which is far field zone where
r is much much greater than lambda by 6 then these fields are negligibly small so I will
get only radiation field there is no radiation field component corresponding to Er so this
will be negligibly small so this will be taken as 0 and we will have a θ component which
will be given by that.
So what we see in near field we will have component Er Eθ and hø all three components
will be present whereas when I go for the far field the Er component is negligibly small
and we will have only two components which is Eθ and hø. Since we are interested here
only in the radiation field we can take appropriately only those terms which are having 1 over r
variation so I can take this quantity is 0 now so this is the term which gives me radiation
field so I can write down only for far field that is what our interest is we get the component
Eθ which is jI0 dLβ square sinθ e to the power jωt sinθ.
minus jβr upon 4πωεr and we get hø that will be equal to jI0 dL sinθ β e to the
power jωt minus jβr upon 4π. So for the far field we have only these two components
again few things can be noted here firstly both the fields have a variation as a function
of angle θ sinθ that means the fields are 0 at θ equal to 0 and fields are maximum
0 at θ equal to 90 degrees so that means both the fields are maximum in this direction
when θ equal to 90 degrees and along the length of this Hertz Dipole that means along
the axis of the Dipole these two fields are identically 0 one observation that means the
fields are not uniformly created in the space they have a directional dependence you have
a maximum field when we go perpendicular to the Hertz Dipole and along the Hertz Dipole
the fields these far fields are identically 0.
Second thing what we note from here is if I take a ratio of these two quantities or
before that the electric and magnetic fields have this term j with respect to this current
I0 e to the power jωt that means the field which are now generated what we call as the
far field or radiation field they are 90 degrees out of phase with respect to the current and
what is the reason for that? The reason is simple that right from beginning we said the
radiation is a phenomena which is related to the rate of change of current.
So if you are having a time varying current which is e to the power jωt the rate of change
of current will be equivalent to multiplying the quantity by jω so you have the fields
which are 90 degree out of phase with respect to the current. So this j which you get here
in this field essentially supports our basic argument which we had for the radiation that
if we accelerate the charges that means if you have a rate of change of current we will
get the radiation field that is what we see from here.
The third thing which we note from here is if I take a ratio of this quantity eθ and
hø this quantity will cancel I0 dl will cancel sinθ will cancel r will cancel 4π will cancel
but what we will get we will get β square here and here we will get β so the ratio
of these two quantities if I take eθ and hø that will be equal to β upon ωε and
I know this β is nothing but ω square root με divided by ωε so this is equal to square
root of μ upon ε which is nothing but the intrinsic impedance of the medium eθ.
So note what we have got here the wave which we have got now or the field which we have
got this represents the spherical wave that means the wave is travelling in the r direction
that is what we right from the beginning we got from the solution we got a component eθ
for the electric field and component hø for the magnetic field which is perpendicular
to the plane of the paper and ratio of the electric and magnetic field is equal to the
intrinsic impedance of the medium that means these fields are having exactly identical
properties as we used to have for uniform plane waves that the electric field the magnetic
field and the direction of the wave propagation are perpendicular to each other that is what
we have here the wave propagates in r direction the field is in θ direction electric field
and the magnetic field is in ø direction so these three are perpendicular to each other
and the ratio of the electric and magnetic field is equal to the intrinsic impedance
of the medium so this wave is spherical wave and it has a transverse nature that the electric
and magnetic field both are transverse to the direction of the wave propagation so we
have got here what is called a transverse spherical electromagnetic wave and it has
properties all properties of transverse electromagnetic wave like the ratio of the electric and magnetic
field should be decided by the medium properties which is the intrinsic impedance of the medium
and electric field the magnetic field and the direction of the wave propagation should
be perpendicular to each other.
So though the wave which is created by this is spherical every point in space if you go
around this Hertz Dipole you will see a transverse electromagnetic wave though the direction
of the transverse electromagnetic wave will be varying at different points in space but
at any location if you ask what is the nature of the electromagnetic wave it is a transverse
electromagnetic wave so essentially if I take the observation point draw a sphere passing
through that point the radially outwards direction gives me the direction of the wave propagation
and the tangents which are drawn to the surface at that location perpendicular to each other
they give you direction of the electric and the magnetic fields.
We can also see some interesting things from here and that is the electric and the transverse
nature of the electromagnetic wave is there at every point in space and its direction
will be changing when we go to different locations but at a given point how the electric field
is varying as a function of time. Let us consider this point here the electric field is having
a theta component which will be positive or negative that means at this location the
electric field is always oriented in this direction as a function of time that means
this wave is a linearly polarized wave. The direction of the electric field will change
from location to location here theta direction is this if I go to a point here theta direction
will be vertical if I go here theta direction will be like that so from one location to
another location direction of the electric field will change but if I ask what is the
polarization which is the direction of the electric field at a particular location that
wave is linearly polarized.
So now we have got a very interesting conclusions and that is if we consider the small current
element what is called the hertz dipole then it generates variety of fields it generates
induction field it generates electrostatic field it generates radiation field however
if we take only the radiation fields then this radiation fields satisfy all the properties
which the transverse electromagnetic wave has so it generates a spherical wave but the
electric and magnetic fields are perpendicular to each other and they are also perpendicular
to the direction of the wave propagation also the ratio of the electric and magnetic field
is equal to the intrinsic impedance of the medium and the polarization which the wave
has at any point for the hertz dipole will be always linear polarization so the hertz
dipole essentially generates an electromagnetic wave which is spherical but is linearly polarized
so on this concept then we will develop more and then we will try to investigate more practical
antenna systems we will see how much power is radiated by the current element and so
on and so on.
