Problems on Antennas and radiation

nptelhrd
41 followers
2 Video Views·Dec 6, 2023
Lecture series on Transmission Lines and E.M Waves by Prof. R.K.Shevgaonkar, Dept of Electrical Engineering, IIT Bombay.For more details on NPTEL visit http://nptel.iitm.ac.in
In the last few lectures we developed the theory of radiation or antennas. In this session
we solved some problems based on the theory which we have developed for radiation and
antennas.
So let us take a problem here. There is a z oriented hertz dipole of length 10 cm excited
with a sinusoidal current of amplitude 20 amperes and frequency 10 megahertz. Find the
instantaneous electric field at a distance of 1 meter along the x axis at 1 microsecond.
Also find the orientation of the electric field. So this is the simple problem based
on the theory which we have developed for the hertz dipole.
So the problem which is given here is we have a hertz dipole. So let us write down the coordinate
system. So let us say this is the direction this is x, this is z then the y will be oriented
this way and we have a hertz dipole here of length 10 cm that is 0.1 meters and the peak
current is 20 amperes. So we have here this is I into dl and then this I dl for this problem
will be 20 into 0.1 that is equal to 2 amperes meter. So that is the current moment for for
this dipole which is given here and then we require now for calculation of the electric
field the quantity beta.
So first you have to calculate the angular frequency omega then the radiation is going
in the free space so the velocity is equal to velocity of light. So we can get from there
first omega equal to 2pi into 10 megahertz so it is 10 to the power 6 so that is equal
to 2pi into 10 to the power 7 radians per second.
And then the phase constant beta which is omega pi c is equal to 2pi into 10 to the
power 7 divided by 3 into 10 to the power 8 so that is equal to pi upon 15 radians per
meter and the distance r is given as 1 meter from the antenna and this distance r is given
at a time which is 1 microsecond.
So here we assume that at t equal to 0 the current is maximum in this hertz dipole and
it will be flowing upwards so we can take the current variation as cosine of omega t
and then we can calculate what will be the field after a time of 1 microsecond at a distance
of 1 meter from the hertz dipole. So once you get beta then we can get beta r that is
equal to pi upon 15 into r which is 1 meter so that will be equal to pi upon 15 radians
and we can get this quantity beta t omega t that is equal to 2pi into 10 to the power
7 into 1 microsecond which is 10 to the power minus 6 so that is equal to 20pi radians.
So now we got all the basic quantities required for calculation of the electric field and
in general we have the electric field which has three components r theta and phi and in
this case we are looking for in the direction which is x axis so we want to find out the
field in this direction. So for this the theta which is measured from the z axis that angle
theta is equal to pi by 2, r direction which is going outwards in this direction so that
is same as r direction also so essentially we have the electric field E x which is equal
to E r, the theta direction is going downward like that so in this case the theta component
will be opposite to the z z axis so we have from here the theta component E theta equal
to minus E z that is the way the theta component component will be oriented.
So now we can calculate using the expression which we have derived for the total field
from the Hertz Dipole we can get E r that is same as E x in this case which is equal
to I 0, the I 0 is the peak current which is same as this so we got I 0 dL cos of theta
divided by 4 pi omega epsilon into beta upon r square minus j upon r cube and in this case
since theta for this point which is 1 meter away along the x axis theta equal to pi by
2 so this cos theta will be equal to 0 so in this case E r equal to E x that will be
equal to 0.
The theta component for the electric field E theta which is same as minus E z that is
equal to I 0 into dL into sin theta upon 4 pi epsilon and in this case E r is equal to
and we want to find out now the electric field at some instant of time so we take the real
part of e to the power j omega t minus j beta r multiplied by j beta square upon omega r
plus beta upon omega r square minus j upon omega r cube.
These are the expressions which we have already derived when we were analyzing the Hertz Dipole.
So now we can substitute different values here. The I 0 dL we have got is 2, the beta
r is pi upon 15, the omega t is 20 pi so if you substitute all these quantities in this
and epsilon equal to epsilon 0 for the free space we get E theta will be equal to 0.1932
volts per meter and as we know for the Hertz Dipole the phi component of the electric field
is 0 so we get E phi equal to 0.
So in this case if you move along the x axis then the r component is 0, the theta component
which is same as the minus z component and the phi component also is 0 which will be
perpendicular to the plane of the paper. So by using the expression which we have derived
now we can find out the total field at a distance and at some instant of time from the Hertz
Dipole.
Next problem, a vertical Hertz Dipole radiates 1 kilowatt of power. Find the electric field
and the pointing vector at a distance of 10 kilometer from the Dipole in the horizontal
plane passing through the Dipole. What is the direction of the electric field at the
observation point? So in this case the total power which is radiated by the Dipole is given
you have to find out the electric field at a distance of 10 kilometer. So the problem
is we have the Hertz Dipole here, the horizontal plane which is passing through this which
will be this so at a distance of 10 kilometer in this direction you have to find out the
electric field.
As we know again the electric field here if I take the standard coordinate system this
is the z axis and if I take a plane which is perpendicular to the Dipole then we have
theta component which will be oriented like this so the electric field is vertical at
this location and now by using the relation which we have derived we can find out what
is the electric field at this location.
So first what we do we have already derived the expression for the total power radiated
by the Hertz Dipole. So we know that the power radiated W is 1 kilowatt that is what
is given that is equal to 40 pi square I 0 square dL upon lambda whole square. Now from
here we can calculate this quantity I 0 dL upon lambda so you can invert this to get
I 0 dL upon lambda that is equal to 1 kilowatt which is 10 to the power 3 watts divided by
40 pi square square root so that is equal to 5 upon pi.
Now at this location the theta this is z axis so theta in this case is again 90 degrees
is pi by 2 so we can get the electric field magnitude of the electric field that will
be equal to I 0 dL beta square upon 4 pi epsilon omega into R. The omega upon beta we can separate
out so this we can write as I 0 dL upon 4 pi epsilon we can write here beta upon omega
into beta and omega upon beta is nothing but 1 upon velocity of light and this is 2 pi
upon lambda so we can get this equal to I 0 dL upon 4 pi epsilon 1 upon velocity of
light multiplied by 2 pi by lambda for beta.
So substituting now for this we get mod of electric field that will be equal to 1 upon
2 pi R into c into I 0 dL upon lambda. Now we have already derived the value for I 0
dL upon lambda which is 5 upon pi. So if I substitute that I get the mod of electric
field that is equal to 30 millivolts per meter. So this is equal to I 0 dL upon lambda.
The next thing which you have to find out in this problem is the horizontal plane passing
through this we want to know the electric field and the pointing vector at a distance
of 10 kilometer. So we found the electric field now we have to find out what is the
pointing vector at that location so we know that pointing vector P the magnitude of that
that is equal to mod E square upon eta so that is equal to 30 into I 0 dL upon lambda
into 10 to the power minus 3 per millivolts square upon eta which is 120 pi.
If I simplify this I get the power density which is 3 into 10 to the power minus 4 upon
45 watts per meter square. So this is again a very simple problem where the total power
radiated by the Hertz Dipole is given and then we are asked to find out what is the
electric field and the pointing vector at a distance of 10 kilometer from the Hertz
Dipole.
Let us now take some problem based on the Dipole which is having a finite length. As
we know the Hertz Dipole is infinitesimally small, its size is much much smaller than
lambda whereas in practice we require Dipoles which have substantial length. So in this
case the problem is a 1.2 lambda long Dipole has 1 ampere peak input current. Find the
maximum peak current seen on the Dipole. If the Dipole is oriented along the z axis find
the radiation electric field and the magnetic field at a distance of 100 meter along theta
equal to 60 degrees.
So first of all we have to get the expression for the field for this Dipole which is having
a length of 1.2 lambda and then from there we can essentially calculate substituting
the parameter the field at an angle theta equal to 60 degrees at a distance of 100 meters.
Now as we know the Dipole has a length of 1.2 lambda so h which is half this length
for the Dipole this we call as h so h is equal to total length of the Dipole which is 1.2
lambda divided by 2 so that is equal to 0.6 lambda. So this length is little more than
lambda by 2 so we get a current distribution which will look like that and that is the
current which is the maximum current which we are going to see I m and this will be the
input current which will correspond to this value.
So now as we know the current I input current at this location so that is I n that is equal
to I m sin of beta h and this current is given as 1 ampere the input current peak current
is 1 ampere so this quantity is 1 ampere so that is equal to I m sin of beta which is
2pi by lambda into 0.6 lambda. So this quantity is 1.2pi so we get I m is equal to sin of
1.2pi and the I maximum will be equal to 1 upon this quantity so it will be 1 upon sin
of 1.2pi which is equal to 1.7 amperes. Once we get this quantity I m then we know that
this Dipole for the radiation field has only theta component e theta and that is equal
to 60 I m upon r where r is the distance measured from the center of the Dipole cosine
of beta h cos theta minus cos of beta h upon sin of theta.
So now the distance is given as 100 meters, the theta is 60 degrees so we can substitute
now for these parameters here. So here we are given that r is equal to 100 meters, theta
is equal to 60 degrees that is equal to pi by 3 so the theta component of the electric
field will be equal to 60 I m which is 1.7 amperes divided by 100 meters into cos of
1.2pi that is beta h multiplied by cos theta which is 1 by 2 so this gives cos theta equal
to 1 upon 2 so we can get here which is beta h cos theta that will be 0.6pi minus cos of
1.2pi upon sin of pi by 6 pi by 3 that is equal to root 3 by 2.
So simplifying this we can get the value for the electric field that is approximately equal
to 0.09 volts per meter. Once I know the electric field then I can find out the magnetic field
since I know the relation between the electric and magnetic field that is h phi for the radiation
field is equal to E theta upon the intrinsic impedance of the medium which is 120pi so
this will be h phi will be equal to 0.09 upon 120pi that is equal to 0.24 milli amperes
per meter.
So in this case we were given the finite length of the dipole which is 1.2 lambda then the
input current is given and then we are supposed to find out what is the maximum current which
we will see on the dipole and also the electric field at an angle theta equal to 60 degrees
so this is 100 meters and this angle is 60 degrees. At this point you are supposed to
find the electric and magnetic field. So that is what we did we used the expression for
E theta substitute these values then you get the value for E theta once you get E theta
then we can find out h phi which is E theta upon the intrinsic impedance of the medium.
Let us now take a problem which is general problem for the antenna and that is the field
radiation pattern of an antenna is given by f theta which is equal to sin of tan cos theta
divided by sin of 2 cos theta where theta varies from 0 to pi. Find the directions of
the null, direction of the maximum radiation and also the half power beam width of the
antenna.
So without specifying what kind of antenna this is essentially the radiation pattern
directly has been given and we have to find out now the directions of the nulls, direction
of maximum radiation and the half power beam width. Now as we know the nulls correspond
to f theta equal to 0 so if I take this function and equate that to 0 we will get the directions
thetas for which the field will go to 0. So the nulls of this antenna would correspond
to f theta is equal to 0 that is sin of tan tan cos of theta that should be equal to 0
provided the denominator is not equal to 0. So for those angle for which this quantity
goes to 0 that will not represent a null but otherwise for all those values of theta for
which the numerator goes to 0 we will get a null for the radiation pattern so provided
sin of 2 cos theta is not equal to 0.
So from here essentially we get tan cos of theta that will be equal to plus minus m pi
where m is an integer so m is equal to 1, 2, 3 and so on. So we will get tan tan cos
so we get cos theta null that is equal to plus minus m pi upon tan. Now since cos of
this angle the magnitude of that should be always less than or equal to unity essentially
that that means this quantity m pi upon tan should be less than or equal to 1. So we have
finite number of angles because we have this quantity should be less than or equal to 1
so we get nulls only for those values of m for which m pi upon tan is less than 1 so
we get nulls only for values of m which satisfy m pi upon tan less than or equal to 1.
That means this quantity here m can go only 1, 2, 3 if m becomes 4 then this quantity
is greater than 1. So essentially the possible values of m we we get m equal to 1, 2 and
3. So substituting now this value for m equal to 1, 2, 3 we get the the nulls which satisfy
that would correspond to theta nulls that will be cos inverse of plus minus pi upon
tan cos inverse 2 pi upon tan and cos inverse 3 pi upon tan and as is given theta lies in
the range 0 to pi so from here we can find out the corresponding values of theta so we
get theta nulls that is equal to 19.53 degrees, 51.07 degree, 71.69 degree, 108.31 degree,
128.93 degrees and 160.47 degrees.
So the radiation pattern has 6 nulls in the range theta equal to 0 to pi. The angle corresponding
to theta equal to pi by u pi by 2 the denominator of f theta also goes to 0 making theta equal
to pi by 2 as a direction of maximum radiation. So if I look at here if I put theta equal
to pi by 2 this quantity is this quantity is 0, theta equal to pi by 2 this quantity
is 0 so we may get a null corresponding to theta equal to pi by 2 here but that does
not represent a null because for that the denominator also goes to 0 and then that direction
essentially is the direction of maximum radiation.
So we get direction of maximum radiation that is the direction of maximum radiation. So
is theta max is equal to pi by 2. Now to find out the half power beam width of the antenna
essentially we have to take this field expression, find out what is the magnitude maximum magnitude
which you can get for this field then you find out the angle for which the field will
reduce to 1 over root 2 of its maximum value and the angular difference between these two
angles essentially will give the half power beam width.
So in this case we have a beam if I measure let us say theta going from 0 to pi then we
have a beam which looks like that, this is theta equal to 0, this is theta equal to pi
and we have a direction of maximum radiation that is theta equal to pi by 2. So we have
to find out now the half power beam width that means we have to find out these two angles
this is angle theta 1 and this angle theta 2 at which the field reduces to 1 over root
2 of this maximum value.
So first we have to find out the maximum value of this expression and since the theta equal
to pi by 2 this is 0 by 0 essentially you have to calculate this by taking a limit when
theta tends to pi by 2. So for this we can expand this. So for theta equal to pi by 2
maximum value of the function f theta maximum that would be the limit when theta tends to
pi by 2 of this expression which is sin of 10 cos theta divided by sin of 2 cos theta.
Expanding this sin function we get this is limit theta tends to pi by 2 10 cos theta
minus 10 cos theta cube upon factorial 3 plus and so on. This is the expansion of the sin
function so here you get 2 cos theta minus 2 cos theta whole cube upon factorial 3 plus
and so on.
Now taking this cos theta common from numerator and denominator and then when theta tends
to 0 cos theta will theta tends to pi by 2 cos theta will tend to 0 so all these terms
will go to 0 except this term which will give the value equal to 5. So the maximum
value of the radiation pattern is 5. So for half power points mod of f theta should be
equal to 5 upon root 2. So in this you have the maximum value this is equal to 5 the radiation
pattern and this point now is 5 upon root 2 this is 5 upon root 2.
Now this thing cannot be solved analytically. This expression should be now equated to 1
upon root 2 5 upon root 2 and this thing has to be solved numerically so you have to get
the values for these two angles theta 1 and theta 2 essentially by solving that expression
numerically. So we solve numerically the expression sin of tan cos theta upon sin of 2 cos theta
that is equal to 5 upon root 2 and there we get the values two angles theta 1 that is
equal to 82.08 degrees and theta 2 is equal to 82.08 degrees.
So the half power beam width for this antenna is equal to theta 2 minus theta 1 that is
approximately equal to 16 degrees. So depending upon the radiation pattern one can solve the
half power beam width analytically or if the expression is not analytically solvable then
essentially you find out the angles at which the field reduces to root 2 of its maximum
value by using numerical techniques and then one can find out the half power beam width
of this antenna.
Let us take one more problem which is now related to the directivity of the antenna.
There is an antenna which is fed with 100 watt of power, the efficiency of the antenna
is 80%. If the radiation pattern of the antenna is given as p theta equal to sin square theta
sin square phi where theta varies from 0 to pi and phi varies from 0 to pi and 0 elsewhere
find the radiation intensity in the direction of maximum radiation also find the power density
at a distance of 10 kilometer in the direction of the maximum radiation.
So this problem there are various points to be noted. Firstly, the antenna is not radiating
full power that is the efficiency which is 80% that means whatever power is input to
the antenna only 80% of that power is radiated in the space. Secondly, since we have a radiation
pattern which is given by this the power is not uniformly distributed in all directions
so the radiation intensity in the direction of maximum is increased compared to the isotropic
antenna and that increase essentially is related to the directivity of the antenna.
So we have to calculate the directivity of the antenna, we can calculate the radiation
intensity for an isotropic antenna once we know the power radiated by the antenna and
then from there we can calculate the electric field or the power density at a given distance.
So first we note the power radiated W that is equal to power input multiplied by the
antenna efficiency. So it is given the input power to the antenna is 100 watts and the
efficiency of the antenna is 80% that is 0.8 so the total radiated power is 80 watts. Now
if this power is given to the isotropic antenna then it will create uniform distribution of
the power and the radiation intensity will be if I distribute this power uniformly over
4 pi solid angle then the power per unit solid angle is the radiation intensity.
So in this case essentially we get the radiation intensity for an isotropic antenna and the
radiation intensity we call as the average radiation intensity so that U average is equal
to 80 divided by 4 pi solid angle 4 pi watts per steradian. Now we know the maximum radiation
intensity which we can get from the antenna is the average radiation intensity multiplied
by the directivity of the antenna. So U maximum that is equal to U average multiplied by the
directivity of the antenna.
So now to find out the maximum radiation intensity first we have to find out the directivity
of the antenna from the radiation pattern which is given here and note here the radiation
pattern which is given here is p theta that is the radiation pattern straight away for
the power. So now we can go and use this radiation pattern to find the directivity. The directivity
of an antenna is equal to 4 pi upon the power pattern p theta integrated over 4 pi solid
angle so this we can write down explicitly in terms of the spherical coordinates so this
is 4 pi divided by phi which varies the radiation pattern is non-zero only over this range of
phi which is 0 to pi same is true for theta that the radiation pattern is non-zero only
over this range which is 0 to pi so we have a limit here for phi which is equal to 0 to
pi for theta also we have a limit 0 to pi and the power radiation pattern is given by
theta sin square phi so this is sin square theta sin square phi and the incremental solid
angle is sin theta d theta d phi so this will give us 4 pi divided by 0 to pi for phi so
this is sin square phi d phi 0 to pi sin cube theta d theta.
This integral we can solve by expanding this in cosine of 2 phi and this one we can write
as 1 minus cos square theta and sin theta so the two integrations can be written as
this is 4 pi from 0 to pi this we can write as 1 minus cos of 2 phi upon 2 d phi a sin
square phi we can write like that and for theta we can write here as sin square theta
into sin theta and sin square theta we can write as 1 minus cos square theta so this
we can get 0 to pi 1 minus cos square theta sin theta d theta.
Now in this integral we can substitute for cos theta equal to t so sin theta d theta
will become d t so this integral is now very simple to solve so you get finally value which
is 4 pi divided by pi upon 2 that is 2 upon 3 this value so you get a directivity for
this antenna which is 12. Once you know the directivity then now I can calculate the U
maximum which is the average radiation intensity which is 80 upon 4 pi radian multiplied by
directivity which is 12 so from here we can get 80 upon 4 pi into directivity 12 so that
gives us 240 upon pi watts per star radian that is the maximum radiation intensity which
which we get.
Now the pointing vector in that direction at a distance we can calculate because we
know that the the power density P is the radiation intensity divided by R square and it is given
you have to find out this power density at a distance of 10 kilometer in the direction
of maximum radiation. So since you have found out the radiation intensity in the direction
of maximum radiation and R is 10 kilometer we can substitute into this so this is 240
upon pi divided by 10 kilometer so which is 10 into 10 to the power 3 whole square so
that would give us 0.764 micro watt per meter square.
Once we know the the power density then we can find out the electric field at that point
because the power density P is mod of E square divided by eta so E electric field will be
equal to square root of power density into eta so equal to square root of 0.764 into
micro watts per meter square so this is 10 to the power minus 6 for micro watts into
eta which is 120 pi. So simplifying this essentially we can get the expression for the or the value
for the electric field at that distance.
So see in this problem what is given? The total input power is given, the efficiency
of the antenna is given, the power radiation pattern is given and we are asked to find
out the maximum radiation intensity, the maximum power density at a distance of 10 kilometer
and also the maximum electric field. So first we find out what is the power radiated by
the antenna then we find out the directivity of the antenna and then using this relation
we find out the maximum radiation intensity which is average radiation intensity multiplied
by directivity and once you get maximum radiation intensity then you can calculate the power
density which is maximum radiation intensity by R square and once you get the power density
then we can find out the electric field which is square root of power density multiplied
by the intrinsic impedance of the medium.
So these are some representative problems essentially which we see in practice. So if
we systematically follow the analysis which you have developed for the antennas or the
radiation then the problem essentially can be split into small small parts and one can
solve the complicated problems by using a systematic approach. So once we understand
the theory properly for the radiation and we can physically visualize these radiation
patterns then the solution of the antenna problems rather become extremely simple.
So these problems which we have discussed today essentially give us some feel how the
radiation related problems will be used or will be solved in practice. In fact these
are the problems which we will normally encounter in designing for example the microwave links
or for designing the satellite communication antennas or the radar antennas and so on.
So this essentially completes our discussion related to the radiation or the antennas.
