GCD George Patton - USSV Rhino GX

Hey everyone, today's video we're going to be looking at this Diecast by GCD and it's called George Patton. That's not the real name. It is actually the USSV Rhino GX and it is a armoured Vehicle you can see by the windows the detailing It's very clear that this is a very sturdy vehicle and I'll be showing later on It's got some variation in the wheels positioning Sadly just a quick summary this lens stayed on but when I got it this lens fell off And I've tried to superglue it, but it hasn't really come out great So just a quality control issue I wanted to highlight for the diecast community people who are watching this video If you're into diecast cars and transformers, please consider subscribing to my channel. Thank you Okay, here's the very very tightly packed GCD Gamecore products and it is a USG pattern look at this we've got like glossy letters on top of a Silk or a matte black So a lot of must have cost a lot Rhino GX number 61 And on the back just some illustration there. I don't even know what these letters are I don't know what clearly what they're saying. Anyway, that's not what we're here for let's get this open and Take a look inside So here I just wanted to show you normally I just skip it but look at this packaging really well packaged You've got a plastic part here to stop it from moving around You don't want things loose you want it to stay. I've got some tape here. Let's take this off off the acrylic And inside the acrylic case Finally get to the model it's like the layers of Ferrero Rocher going down to the nutty center and Here is the model now. This is a really heavy model. It's a premium model, but I will say What was disappointing for me was that on my model anyway? This Light just came off and I had to superglue it on This is the proper version and this is my botched up attempt at doing it Which doesn't look half as nice, which is a shame and also this You can see the plastic lens goes all the way around and here it doesn't quite It was quite tricky to put it on the angle and the glue just dried the superglue just dried. So Sadly that is one side and this is the other this is the way it's supposed to be So mr. G pattern, sorry about that. But anyway, let's take a look at the rest of the model It's a shame because look it's just sharp and crisp on this side and this side. It's like Melted it looks like it's been through. I don't know Yeah, anyway, right. Anyway, let's have a look. Let's take a look at the front Anyway, let's get it over and done with so also this grill The glue was half coming off and I've had to put some on there behind it to put it on So although it is a premium model with the bits falling off and stuff I think the production and the workmanship hasn't been that great because bits should not be coming off. So There you go. Okay. Whoops. Let me zoom in. Let's get that on Let's try that one. So there we go Maybe it's just my model. Maybe it's just bad luck. But anyway, that's what it is Comes in this kind of darkened khaki green Slash with grey tinge to it These wheels they turn which is quite cool, but they're not linked to the steering wheel They just turn from a mechanism underneath and you can see here The push and pull part of it Chunky rubber tires, which is a really nice touch with very good textured treads Metal base. I think this silver part is plastic though Yeah, not looks too. Oh, it's very thin. Oh, it's a very weak metal but quite fragile as well. So you don't want to Smash this around like a like you do with the Hot Wheels Also from the side Got these really cool shaped windows Armored like an armored SUV. I've got even got mirrors in These part here on both sides But we've got two sunroofs here the two compartments on the front. We've got some lights here as well painted silver on Plastic on the back. We do actually have a rubber tire Exactly like that just stuck on which is the way it should be done So yeah, a lot of metal used very heavy model Got the footstep here as well. Let's have a look at my in detail So yeah, it's been if you really really thought out like I said I just wish that lens the front grill and the headlight at the front had been Just better quality really and then from the back. Look at that solid what beast of a vehicle G pattern. There you go Okay, let's have a look interior wise what we've got here quite detailed as well inside just look on this can't really see in the back unless we take it apart and I Can't see any screws to do that. So Maybe it's it's quite a seamless vehicle. They've done. Yeah, really nice. Okay, let's get this guy on the turntable absolutely solid Heavy premium casting rubber wheels tires all the tampos and painted stuff is all there unmistakable Silhouette of our vehicle and all of the fancy futuristic kind of window style openings and Shapes, there you go. Let me know what you think in the comments below. Do you have any die casts by GCD? Do you have this one let me know what you whether your headlight or anything any of the bits just fell off like minded It's quite cool For posing you can put the wheels like that. It's cool for dioramas as well Definitely not a toy more of a model, but really well overall well made Cool. Hope you enjoyed this review. Let me know what you think and hopefully see you in the next review review video. Take care