noc18-mm20 Lecture 07-Chemical Potential

IIT Kanpur July 201
20 followers
2 Video Views·Dec 3, 2023
So, we are going to start new lecture. So, that is lecture number 7 in phase equilibria.
So, just do a decap of last lecture. Now, the decap of last lecture in that lecture
we worked out what is the change in the entropy, which was basically configuration entropy
change and that worked out to be your delta S worked out to be minus of R x a ln x a plus
x b ln x b. And from this we determine what is delta G this was for ideal solution for
which delta H of mixing was 0 as a result we just made it delta T delta S mix and this
was R T x a ln x a plus x b ln x b. So, when we plotted this. So, when you plot
this delta G of mixing as a function of mole fraction of b. So, delta G of mixing goes.
So, goes like that. So, this is what is delta G of mixing and of course, as you increase
the temperature it goes further down. So, this is at T 1 this is at T 2 where T 2 is
greater than T 1 this is delta G mixing here if you plot the free energy. So, the free
energy went like this. So, this was G a this was G b and this was the mixing term delta
G and that is when you went from a as a function of x b of course. So, this delta G mixing
being negative you can see that it will be negative because x a is less than 1 and x
b is also less than 1. So, ln of x a and ln of x b will be minus as a result delta G mixing
will be negative this tells you this is basically the driving force for making a stable solid
solution when two elements are mixed into each other.
So, now what we do is that we look at the we look at some other aspects of phase formation
and moving away from ideality is important. So, first in this aspect we will because you
know ideal solid solution which say that delta H of mixing is no longer valid in case of
in most cases because of atomic interactions and different bonds and. So, on and. So, forth.
So, we will have to move into a regular solutions before we do that we first discuss another
important aspect of thermodynamics that is chemical potential now basically chemical
potential is a measure of how free energy G will change when the composition of the
system is changed and if we talk in terms of a phase when the composition of the phase
changes all right. Now, this requires us to assume to begin with that other thermodynamic
parameters such as temperature pressure are constant. So, basically we are looking at
the changes in the incremental changes in the free energy when you make very small changes
to the composition of a given phase at constant temperature and pressure.
So, essentially what we do is that let us say you have a phase and you add a few atoms
of if it if it consists of a b a few atoms of a whose amount is. So, basically the amount
is very small let us say d n a this is the incremental change to. So, number of a atoms
present originally in a phase are much larger than the amount. So, this is the incremental
amount let us say incremental amount. So, number of atoms which are originally present
in phase a are much larger than this incremental amount that is d n a. So, as a result we size
of the system by same amount that is d n a and this also leads to changes in the free
energy. So, free energy change correspondingly let
us say is another quantity called as d g prime. So, if d g if d n a is very small then d g
prime can be expressed as a quantity mu a multiplied by d n a and at this point temperature
pressure and n b which is the number of b atoms they remain constant. So, now here this
proportionality factor mu a is called as chemical potential. So, basically this is chemical
potential of a in the phase which consists of both a and b or alternatively it is also
called as partial molar free energy of a in the phase. So, this mu a is generally mu
a is as we can see is dependent upon composition. So, we can represent this mu a as del g prime
by del n a at constant temperature constant pressure and constant n b.
So, basically we are making this d n a. So, small. So, that there is no appreciable change
in the overall composition of the phase it is a very minute change and this minute change
gives rise to changes in the free energy. So, incremental changes in the free energy
upon incremental changes in the composition are represented by a quantity called as chemical
potential. So, this is chemical potential of element a in the phase.
So, now. So, you can have you can extend this approach to other elements also. So, for a
binary solution let us say it is a b binary solution. So, at again if temperature and
pressure are constant then we can say d g prime is equal to mu a d n a. So, you are
making changes in both a and b d n b. So, this is the quantity which is corresponding
to changes made in a and this is the chemical potential of b corresponding to the changes
that are made in b. So, if you change the pressure and temperature
also then free energy will be d g prime will be equal to v d p minus s d t plus mu a d
n a plus mu b d n b. So, this is about like a generalized equation of free energy change
in a system. So, you can extend this approach to a multi component system. So, for a multi
component system this d g prime will be equal to v d p minus s d t plus mu a d n a plus
mu b d n b plus mu c d n c and so on and so forth or in a general form you can write
this as v d p minus s d t plus sigma i mu i d n i. So, this would be the general form
of changes in the free energy when you when changes in the various variables are made.
So, not all of them are made simultaneously. So, when you for example, change compositions
these are generally kept as constant. So, as a result you only worry about the changes
in the composition. So, this is a generalized free energy equation for incremental changes
in the composition correlating the chemical potential with the changes in the composition.
So, now let us now come back to binary phase. So, we have a binary system and this system
you have a phase which consists of x a moles of a and x b moles of b as we started earlier.
So, x a basically x a is nothing, but mole fraction. So, I would say it is not mole it
is rather mole fraction such that x a plus x b is equal to 1. So, since we know the ratio
of a and b. So, what is a is to b ratio nothing, but x a divided by x b. So, since ratio of
a is to b is known in terms of x a is to x b you can increase the size of the system
appropriately. So, that the ratio of x a is to x b does not change. So, what you can do
is that. So, this I wrote as 1 mole. So, let us say you take 2 moles. So, this will become
2 x a and 2 x b. So, on and. So, you can you can write this as 1.1 x a and 1.1 x b
this will become 1.1. So, you correspondingly increase the size of the system without changing
the corresponding without changing the ratio of 2 elements.
So, as a result what we can write is that d N a divided by d N b is maintained in such
a fashion. So, that it is always equal to x a divided by. So, let us say for an example
if x a is equal to you know 0.75 x b is equal to 0.25 then d N a by d N b will be 0.75 to
0.25 this is nothing, but 3 is to 1. So, when you make a change in d N a and d N b if it
is in this ratio of 3 is to 1. So, you add 1 atom of N 1 atom of b and 3 of a or 2 of
b and 6 of a then this ratio is always maintained as a result the overall fraction of a and
b in the system does not change. So, the overall composition is maintained without altering.
So, in what you do in this situation is if you maintain this ratio then mu a and mu b
which are function of composition do not change. So, now, let us calculate what is the molar
free energy the molar free energy can be written in this case as x a mu a plus x b mu b and
this is equal to x a into d g prime N a plus x b into del g prime by del. So, this is the.
So, you can write in this slide g is equal to x a del g prime by del N a plus x b into
del g prime by del. So, when you now plot this a this is b. So, you go as x. So, you
increase the mole fraction of b in the right direction and on this y axis we plot molar
free energy and what we have here is basically a situation like this. So, the tangent we
can see that since it is a tangent to this let us say this is the composition x b that
we are interested in x b. So, the tangent will determine the chemical
potential on 2 sides this is mu this is the free energy g a g b and what is this that
is what we will determine. So, let us see what is the what are these. So, we know that
x a plus x b is equal to 1. So, we can write d x a is equal to minus of d x b and we are
writing g as mu a x a mu a plus x b mu b and we can write this as x a g a plus x b g b
plus r t x a l n x a plus r t. So, this is what we did earlier when we calculate the
mixing part. So, let us say. So, this is first expression. So, this is this is what is the
relation with respect to chemical potential this is what is the relation as we obtained
from mixing when we calculate the delta g mix. So, basically it is x a g a plus x b
g b plus r t l n. So, x a l n x a plus r t x b l n x b now you equate these 2 equations
if you equate these 2 equations what you get is mu a is equal to g a plus r t l n x a and
mu b is equal to g b plus r t l n x b and you can see that these both of these terms
this and that both of these will be negative because x b and x a as x a and x b are less
than. So, if you go to previous plot what is this difference going to be this is going
to be minus of r t l n and what is this going to be this is going to be minus of r t l n.
So, basically these are 2 expressions you can represent. So, you can see in this plot
that when you make when you have a free energy curve. So, of course, you have free energy
mixing for a given composition the slope and its intercept. So, you draw a tangent for
a given composition and the intercept of this tangent with respect to x and y axis will
give you the chemical potential. So, this is chemical potential and chemical potential
is related to the free energy of that particular element it is. So, chemical potential is always
chemical potential of a element in a phase. So, chemical potential of a or chemical potential
of b and this is the phase this is the free energy plot for a given phase. So, if you
have different phase you will have to draw a different curve for different phase. So,
if you have for example, another phase let us say that another phase has a free energy
curve something like that then you will have to draw the tangent for that. So, something
like that you will have to do that. So, anyway this is for phase 2 this is for
phase 1. So, for a given phase you can draw the tangent at the minimum and the intercept
of tangent with respect to x and y axis that is a and b axis will give you the chemical
potential. And this chemical potential is related to the free energy of a that molar
free energy of element a by magnitude called as by magnitude minus R T l n x a in this
case of element b it would be minus R T l n x b. So, this is what is the chemical potential
as we have seen chemical potential is nothing, but let us just redefine.
So, chemical potential is essentially it describes minute changes in the free energy when you
vary the composition of a particular when you changes when you change the amount of
that particular element in a given phase. So, basically it is the partial molar free
energy of a in a phase similarly you can have the same thing for b. So, you are you are
specifying the property of a particular element in a given phase. So, from this we can determine
what is the overall change in the free energy when you vary composition all the phase composition
of all the elements in the context of binary systems in the context of binary system the
molar free energy can be sum of the partial molar free energies which is mu a the partial
molar free energy of a multiplied by the fraction of a plus partial molar free energy
of b multiplied by fraction of b and this can be equated with the overall free energy
equation to give you the magnitude of mu a and mu b.
So, chemical potential of a in a phase is related to molar free energy of a plus R T
l n x a and chemical potential of b is equal to molar free energy of b in that phase plus
R T l n x b. So, this is what the concept of chemical potential is and this is a very
important concept as we will see later on when we build up more about the phase diagrams
when you when you when we try to understand the phase diagrams in their formation for
especially for binary solutions. Now, from ideal solution let us move on to
what we call as regular solutions. Now, why do we want to study regular solutions is that
because we said that for ideal solution delta H mixing was equal to 0. Now, what this mean
what did this mean well this meant that in the solid solution of a b there was no preference
for a b bonds or a a bonds or b b bonds because the bond energies of all these three bonds
were equal. So, if you have a b solid solution a b solid solution will if it is a random
solid solution you will have a b bonds you will have a a bonds and you will have b b
bonds. So, correspondingly you will have bond energy e a b you will have bond energy e a
a and you will have bond energy e b b. So, delta H mixing is 0 because there is no
change in the internal energy and that is because there was there was first of all there
was no volume change molar volume change and there was no preference for particular
type of bond. So, which means probability of having a b bond is same as probability
of having a a bond which is same as probability of having b b bond what it meant was basically
e a b was equal to e a a is equal to e b b. So, all three bond energies are equal to each
other as a result there is complete randomization and also there were no other electronic and
structural changes which may happen because of different say for a different atomic sizes
different there could be minor difference in electronegativity there could be difference
in electronic configurations etcetera. So, there were no. So, it was ideal to you
put two atoms they just randomly mix into each other sizes are equal structure is same
electronegativities are same. So, there is no change in the internal energy of the system,
but life is far from easier. So, in reality this does not happen. So, in reality what
we have is delta H mixing in reality for most cases delta H mixing is not equal to 0 it
is either greater than 0 or less than 0. So, delta H mixing. So, when you have delta
H mixing greater than 0 the process of making the solute solution undergoes a reaction which
is endothermic which means heat is absorbed if it is if it is less than 0 then we call
it exothermic which means heat is evolved. So, that is the reality of things and in this
context when we take a formalism when we build a formalism about it we take a approach
called as quasi chemical approach. So, what do we do in this quasi approach first thing
is E a b is not equal to E a a is not equal to E b b and that is because they are different
atoms. So, when they are different atoms the bond
energy of a bond energy of b and bond energy of a b are not same as each other. However,
for the sake of simplicity we take V m of a to be equal to V m of b which is equal to
V m of a b we do not take any change in the no change in molar volume after mixing and
there are other things like you know there is no change in structure you can say lattice
distortion no change in the structure by mean that you know it has a if both of them
were cubic it remains cubic I mean, but there could be subtle variations within the cubic
system itself. So, or you can have distortion in the electronic
structure etcetera etcetera. So, basically we are taking again a slightly non idealized
situation that is these three are different the bond energies are different other than
that it is still fairly ideal and another thing is that that bond energy and lattice
parameter are independent of composition. So, all we have made a difference with respect
to a regular ideal solution is that we have taken the bond energies to be different for
a a a b and b b bonds. So, having assuming having assumed this we will now move forward
to determine the free energy of a regular solution vis a vis the changes in the free
energy of mixing. So, we will stop here in this lecture we will develop this approach
in the next lecture and try to understand what is it is implication in terms of free
energy. So, thank you.
