noc19-ch17-lec34

IIT Kanpur July 201
20 followers
Dec 3, 2023
In this lecture we will discuss the concept of thermodynamics of mixtures
Welcome back, in today's lecture we are going to talk about thermodynamics of mixtures.
In case of pure fluid, the interaction between the components are similar. So, for example,
you have only component let us say I. So, I-I interactions governs thermodynamic properties
such as internal energy, Helmholtz free energy and so forth. However, for the case of mixtures
you will have unlike interactions. So, for example, in the case of let us say two component
system A and B, you will have interactions such as between A-A, A-B and as well as B-B.
So, these are the interactions which will govern the properties of the systems. So,
that means, intermolecular interactions between different components or that is interspecies
interaction will affect the properties ok. So, that is one aspect of it the of course,
the nature of the species or the component will also affect will also affect the properties
ok. So, let us take an example to illustrate a
bit of the impact of mixing two components. One of the example could be a mixture of ethanol
and water. So, let us say we have taken let us say a 50 ml ethanol and we add this to
a 20 ml water. So, what do you expect the final volume of the system? Will it be 70
or will it be more 72, 73 or will it be less? So, it turns out that the final volume in
this case would be 67 milliliter of mixture of ethanol with water. So, what is the reason
for reduction in the volume effectively? So, in this case since ethanol also has a OH group
and water has also OH group. So, essentially it allows them to form hydrogen bond. So,
due to the nature of the hydrogen bond involved in the structure the solution final solution
behave differently than simple additive effects of the this two components.
So, that means, the nature here the final volume which has been reduced is due to the
nature of hydrogen bond involved in the structure of the liquid ok. This hydrogen form bond
allows a specific kind of geometry and which eventually shrinks the solution. So, that
means, the solution has shrunk the ethanol and water that means, ethanol and water can
form or can pack together more tightly right that is why the volume has reduced. So, then
can each species by themselves. Now, notice that the final mass of the final
mixture still remains the same that means, the total mass is conserved right is constant
or conserved ok. However, V mix is not equal to V of ethanol plus V of water. So, what
is something which is evident from this exercise is that the properties in this case clearly
depends on the interactions ok and of course, it all will also will depend on the amount
which we add it here that is something which we are going to look at, but the interactions
plays a big role ok. So, properties of mixture still depends on
the amount present of each species and resulted its resultant interaction. So, that is why
we prefer to express the mixtures property in terms of the contribution from each component.
So, this is the reason that we desire. So, it is desirable to express mixture property
in terms of contribution by the component ok. So, let us little bit explore this how
to express mixture properties in terms of contribution by the component ok. So, for
that let me consider go back to the fundamental thermodynamics expressions.
So, consider dG which is minus S dT plus V dP plus summation mu i dN i. Now, in this
case T and P are intensive variable and we have looked at earlier the homogeneous functions
of G would lead to something which Euler expression which comes up for the case of G can be written
as simply summation mu i N i ok. So, because G is a function of T, P and 1 ok. So, one
can use this homogeneous function of first order and other integration would lead to
this is something which we have done earlier ok, where in this case this would be your
mu 1 N mu small n and N ok. That means, N component system where mu i is nothing, but
dG i by dN i it is a partial derivative of free energy gives free energy with respect
to N i such that N j is constant and of course, your T and P would be also constant ok.
So, for the case of the mixture mu i would be a function of T, P, X 1, X N i and that
is not going to be mu of pure at T and P ok. Now, this is something which we can understand,
but let us try to come up with a generic expression where G could be replaced by a generic extensive
variable let us say K which we can try to generalize it. So, we can generalize this
behavior. So, we can generalize this it using a generic extensive property which we say
let us say K ok. So, in this case K is a function of T, P,
X 1 and N where K could be V, H, U, S, G and so forth. Then we can write this differential
expression of K as this partial derivative of K with respect to T at a constant P keeping
all N's constant dT plus del K by del P at constant T dP plus summation for all component
here where i is equal to 1, 2. Let us say this is m here m component partial derivative
of K with respect to N i T and P is constant and N of j is constant which is not equal
to i dN i right. So, here what we are going to do is we are going to introduce this term
or introduce a variable here which we define as K i bar which we call it as a partial molar
property which is nothing, but del K by del N i T, P, N j constant here. So, this is nothing,
but partial molar property. Now, looking at here you can clearly see this
is nothing, but intensive property ok. Now, this K i the one of the one of the property
of this is that K i will become the small K i for the limit when the mole fraction of
component i approaches toward 1. That means, for the case of pure system the partial molar
property is nothing, but molar property for the system. So, that is what the limiting
conditions as far as that is concerned, but in general K i is not equal to K i that means,
partial molar property is not equal to the molar property.
Now, what would be the example of such a K i bar or the partial molar property example
could be your V of i as I said K i can be replaced by any of this extensive variables.
So, it could be the partial molar property of i which will be del V by del N i at T,
ok. Similarly, I can also write H i as del H by del N i T P, ok. Now, similar to the
case of Gibbs free energy when the Euler expression was Euler integration was used in order to
get this expression. Similarly, we can also look at that for the case of K. Now, note
that this can be written as N i G i bar, right the partial molar property. So, that means,
this is nothing, but mu i, right. So, let me now extend this thing exercise for the
case of K. So, for if you use Euler integration then one can show that K is nothing, but summation
N i K i bar, ok. Now, here we can also divide in a further
this can be simplified by considering by dividing this by K by N total number of moles summation
N i by N T K i bar or small k here is nothing, but X of i K i bar, ok that we can do that.
So, the example of this would be your let us say the volume is summation N i V i bar
or small v is summation X i V i bar. Similarly, this can be done for H also, ok.
Now, given this what we can do is we can extend this exercise to come up with the Gibbs
Sturm relation for the mixtures, ok. So, let us again look at K is nothing, but summation
N i summation K i bar d N i bar. So, that means, at constant temperature and pressure
I can write d K as summation K i bar d N i, right. So, this is something which I can
write and then we have already this Euler integration form which is K is summation N
i K i bar. So, if you can differentiate this. So, this
differentiating would lead to d K is summation N i d K i bar plus summation K i bar d N
i. So, from here we can clearly see the following that d K is summation K i bar d N i bar, right
and d K is also based on the Euler integration is this. This implies that your summation
N i bar d K bar summation N i d K i bar is 0 at constant temperature and pressure, ok.
So, this is the kind of Euler, this is the generalized Gibbs Sturm relation which we
obtain from this exercise where now I can replace K by volume enthalpy and other extensive
property. So, that means, I can write this as N i d V i bar, this has to be 0 at a constant
temperature and pressure. Similarly, this will also hold the following, ok. I can also
divide by total number of molecule, total number of moles here and I can get here in
terms of composition and summation x i d H i equal to 0, ok. So, this is what we have
is generalized Gibbs-Duhem relation that is something which you can say that, ok.
Now, let us apply for the property of volume for the binary mixtures. So, let us try to
do an example for the binary mixture, ok and use this Gibbs-Duhem relations. So, for
the binary mixture let us say it is A B, ok. I can write this as N of A, ok and since we
are interested in the let us say volume property for volume, volume property. We want to apply
this summation expression for volume, then I can write this as d V A plus N B d V B equal
to 0. So, if you differentiate with respect to X of A, so if you differentiate with respect
to X of A, I can get this expression as N A d V A by d X A plus N B d V B by d X A equal
to 0. Now, if you divide by total number of moles I would get X of A d V A d X A plus
X of B d V B d X A equal to 0, ok. Now, let us try to simplify a bit here, ok.
So, if you rearrange and integrate, ok. So, if you rearrange and integrate I can get this
expression as let us say if you are looking at only B here, then it is V B bar is going
to be minus, ok. I can write X A plus X B is equal to 1 or in other word I can get X
B as 1 by X A and this term as d V A by d X A. So, essentially I have this I divided
X B here and replace X B by 1 minus X A taken to the next other side got a negative here
sign and then this is the term which I got and then we have to integrate with d X A,
ok. So, this is the expression we got, ok. So,
it tells you that if V A bar versus X A that means partial molar property of a component
A as a function of the composition of a component A, if that is available then I should be able
to find out the partial molar property of a V B, ok. So, if this relation is available
I should be able to find out the V B, ok. That is about that is what we got from this
exercise. So, let me continue this. Now, we talked about typical property and in terms
of molar properties, the typical property of a mixture can be expressed in terms of
the molar properties. So, that is something which we looked at, but what about the change
in mixing? For example, you added the volume. So, what about the change in the volume which
we observed upon mixing? So, that is something which many times is relevant and important.
So, now let me just talk about that. So, what we are interested is now is property change
of mixing upon mixing, ok. So, if we are talking about generalized extensive variable K then
we can use this K here and delta K mix or we can define this as the K of the mixture
minus summation n i small k i, ok. So, it tells you that if you have added the
components K and the corresponding moles here. So, it is like a literally the effective additive
if you are just adding up the pure component and then you subtract that from the final property
and whatever the change is there that will be your change in the mixing. So, in other word,
if you are talking about let us say volume, this will be a V minus summation n i V i,
ok, where V i is a pure molar volume of a component i, ok, and this is the moles of a
component i, ok. So, and similarly for delta H mix, ok.
So, if you think from this point of view let us consider this that essentially. So, if
you have added let us say component 1, ok, at a constant let us say temperature and pressure,
ok, and essentially what you are looking at is for the case of let us say volume here
looking at the change here would be your delta V if you have added mixture of 1 plus n here.
So, this delta V mix is nothing, but whatever the volume it is there final, ok, minus the
individual volumes here multiplied by molar volumes here multiplied by n i or individual
moles individual volumes here, ok. So, in other word if it is V 1 till V n essentially
what is there is delta V is nothing, but V minus sum of all this V 1 till V n, right.
So, we will try to do some example to understand this bit more. So, we can extend this understanding
from V, we can also extend to let us say H here, ok, ok. So, now, in that case I can
now little bit simplify this expression, ok. Let us look at again the generalized variable.
Now, I know that k we just did that exercise k can be written as n i partial molar property
k i minus n i small k i. So, this can be written as now summation n i k i minus small k i,
ok. So, it just tells you the difference between the molar property and the partial
molar property multiplied by the moles and summing it up over all component would be
would give you the change in the property of the mixture, ok.
So, if you divide by n t I get now delta k mix as summation x i k i bar minus k i,
alright. So, this is my final expression as far as delta k mix is concerned, ok. Now,
let us try to do little bit of some kind of exercise here. So, let us consider a case
of mixture, ok. And let us say that we are giving this component we are adding this component
1, 2 and let us say this is m here, ok. And finally, so, this these are component 1, 2
and 3 and till m and finally, we have a mixed system which is at t and p, ok. And these
all component let us assume that they are also at t and p.
So, at a steady state we can apply the first law for the open system and we can write this
delta u of this system here which is the mixtures is q plus w whatever the work related plus
summation n of in h in minus summation n of out h out. Now, consider that there is
of course, a rigid mixture that means, there is no boundary work. Considering of course,
a steady state of course, this has to go to 0. What remains is now this q, q can be written
as summation n out h out minus summation n in and small h in, ok. Now, this here is
nothing but single one, ok. There is only one here and essentially this is nothing but
h of mix at t p and this is nothing but summation n i small h i, right.
Now, if you look at the expression here, ok this expression tells you that for a steady
state system of a mixture like this q is nothing but delta h mix. So, q is nothing but delta
h mix. So, essentially enthalpy of mixing is the amount of q required to produce a
mixture at t p from pure component at the same temperature pressure in a continuous
flow process, ok. So, this is what clearly tells out that the delta h mix in this case
is nothing but simply the q which is required to mix the component at the same temperature
and produces at the same temperature. So, what we did is we simply defined how to use
the partial molar property which is the contribution given by each component towards the final
property and now this particular definition and exercise what we have just gone through
is something which we are going to now take it in the next lecture with some examples
and elaborate more on this concept, ok. So, that will be the end of this class.
