noc18-mm11 Lec 37-Dislocations in FCG + Partial dislocations

IIT Kanpur July 201
20 followers
Dec 3, 2023
So, in the last class I showed you the topics that we have already covered.
So, if you take a dislocation as a individual entity we looked at stress strain, elastic
energy, types of dislocation, edge and screw forces, stress interaction, their motion,
stress strain rate, velocity and in the end we also took a look at dislocation dynamics
meaning where you can based on these understanding predict the evolution of dislocations.
So now we have covered all the fundamental aspects and now it is time that we move on
to real dislocations meaning in a more usable system and one of the simplest in this one
would be FCC.
So now our topic would be to understand dislocations in FCC and very soon you would realize that
the simple model that we have been discussing is very different or the real dislocations
in FCC are very different from the dislocations that we have been discussing.
So the real dislocations are as you would expect real dislocations are more complex
in structure as well as in their behavior.
So first thing we know about FCC dislocations the slip system is 1 1 0 direction and the
slip planes are 1 1 1.
So this is direction but now let us look at a FCC system and let us draw it over here.
So this is a cube we are drawing a FCC cube and we will put atoms right now we will put
only atoms for the 1 1 1 plane because we are interested in looking at this.
So let me draw one of the 1 1 1 planes there can be several but let me draw just this one
and then let me connect it to show that this is a plane.
So first thing that I have been emphasizing early from the very beginning that when we
say plane you see that this is not a plane as in a floor or a roof it is made out imaginary
plane composed out of atoms.
So now let us look at this one.
So this is the 1 1 1 plane and here where are the 1 1 0 directions.
So this is 1 1 0 direction, this is 1 1 0 direction, this is 1 1 0 direction, this is
1 1 0, this is 1 1 0 direction.
Now what is the smallest translation vector over here, smallest translation vector that
will leave behind.
So if you displace by the whole thing then it would leave behind a perfect crystal that
would leave behind a perfect crystal.
So as you would see this atom when moves to this position is a smallest lattice vector.
If you move the whole thing from here to here you will not find that any change in the crystal
system after that if you are doing it for everything above it.
So this is the smallest vector and what is the magnitude of this and you would say 1
by 2 1 1 0 or to be more precise you can say a by 2 1 1 0 and over here you can see
this is a by 2 1 1 0 all these are or even in the opposite direction you will get a by
2 1 1 0.
So this is called the Berger vector for so far we had only looked at direction.
Now this is the actual vector because this leaves behind this is the smallest translation
vector that will leave behind a perfect crystal and this is also called the Berger vector
for a perfect dislocation or a why perfect because we also have imperfect dislocations
or what are known as partial dislocations and we also have something called as secondary
dislocation.
So this is a perfect dislocation or primary dislocation.
So a by 2 1 1 0 is our vector.
Now let us try to understand some this concept or this plane in a little bit more detail.
So for this now I will draw 1 1 1 plane.
So here what you have seen I have drawn it more like a point in reality you know that
these atoms are touching.
So the atoms are much larger and they will be touching each other.
So now let me draw it with that respect to be able to see on that particular plane.
So I will now just draw 1 plane and on that particular plane I will show you the 1 1 0
vector and some more intricacies related to FCC.
Another thing to understand is that when you have a 1 1 1 plane it has a stacking particular
sequence that appears and which is called ABC-ABC stacking and it will become more clear
when we look at this second diagram which is over here.
So now let us draw it with respect to atoms where atoms are really touching.
So we draw those cube just to be able to explain concepts related to directions.
But in reality you should realize that atoms are touching more like this and although in
my drawing it may seem like some of the atoms are large some of them are small you should
also realize that will not be the case.
All atoms would be equal in size.
So this what I have drawn here is a 1 1 1 plane and if you want to compare with this
triangle that I showed you over here.
So let me draw in yellow just a light shade to show that there is indeed that kind of
plane.
So there is 3 atom, 3 atom, 3 atom just like that we see over here.
So this is the plane that I have drawn over here and here as I said that these 3 atoms
must touch and here you can see that these 3 atoms touch.
So this is the 1 1 1 triangle that you see in the cube but the plane when we draw would
look like this.
Now here the first thing that you must realize is that this is one layer where will the next
layer sit.
So there are particular positions where this next layer sits and I am again drawing smaller
circles to emphasize that there are 2 different kind of points.
So you see there are triangular regions where the atoms can sit and out of this only 50%
are being used and the other 50% would be used in the next layer.
So if you now form this if I were to draw it in a bigger circle, so now I will draw
this next layer.
So over here which are the locations where our green layer is sitting.
It is if you look at this then the green layer is sitting over here, it is sitting over here
the green this corners I am talking about the corners the green corners are over here
and the ones which were left open are over here in between these 3.
So these are I will now mark it with orange color, so this is these are the open ones.
So now what I am trying to emphasize here is that there are 2 different points or 2
different locations on the green layer of atoms and out of this one was taken by the
this maroon layer and another set is still available over here that is the set that will
where the third layer of atom sets.
So the third layer of atom sits somewhere like something like this and if I were to
draw it over here it will be not this one.
So like this and what do we understand from this that if you call this as the A site where
the green atoms are sitting let me put it in green.
So let us say the green layer is sitting in the A sites then where are the maroon layer
sitting they are sitting in the B site and where are the orange layer sitting it is sitting
in the C site.
So we have a particular sequence A, B, C and this keeps continuing.
So you will have a layer like A, B, C, A, B, C this is what happens in the 111 plane
of FCC.
So now moving ahead it will become important when we look at what happens after displacement
of 1 by 2110.
So you will see that in this particular case now let I will need to redraw it the first
layer so that I can again come back and explain the translation Berger vector.
So this has not come out as good as the previous one but I hope you are still able to see what
is going on over here.
Now where is the direction 110?
So if I drew this as my triangle then you can realize this is 110 direction, this is
110 direction, this is 110 direction and the atom just above it is sitting from here
and when I move it, it is moving from this site to this.
So this is our Berger vector which we have defined now let me call it as B0 and you will
realize why I am calling it B0.
So this is the Berger vector B0 equal to A by 2110.
Now if you see this particular atom has to move or basically go uphill and then it will
come down downhill to be able to move to this position.
This is also possible via alternate route which is like this.
So it may as well go from here to over here which is not as much uphill as this one and
again over here.
So you will get a Berger vector B1 and Berger vector B2 and with simple geometry you would
be able to show that this Berger vector B1 is equal to A by 6211.
In fact both of them would be of the same form.
So this is another important aspect that you realize that the original Berger vector that
we have can actually be dissociated into B1 and B2.
So the question is B0 to B1 plus B2 favorable and how do we find out we find energy.
So how can we find the energy over here you can just take this Berger vector which is
A by 2110 and this is A by 6.
So we will take magnitude of these.
So this is A square by 4 into if you take the square 1 square plus 1 square 2 here it
will be A square by 36 into 6 plus A square by 36 into 6.
So this comes out to A square by 2 and this comes out to A square by 6 plus A square by
6.
This is A square by 3 this is A square by 2.
Now which of these are larger this is obviously larger.
So if it dissociates the total energy of this system is going down and therefore this is
favorable.
So energy decreases hence this reaction is favorable.
So you will always the dislocations would like to dissociate into the two what are called
as partials.
So these are partial dislocations and this is the perfect dislocation or the whole dislocation.
So this is one important aspect about FCC that the dislocations over here tend to get
dissociated.
We will come back to this in a while but there is another important aspect.
So we are talking about this whole this is one important aspect which is that the dislocations
have partials and another important aspect is that because of these partials you get
a dislocation which looks something like this.
Now I will try to draw it in terms of the planes.
So let us say these are our planes.
Now for a simple dislocation this is how we have been drawing a dislocation planes.
So this is one plane, this is another plane, this is another plane, this is another plane
and these are the different planes.
So this is the way we have been drawing the different planes but this is now very different.
So this will be if that were the case then this would have been our dislocation or extra
half plane and this would have been our slip plane.
But again here so I will have to use this side only so that I can make use of this drawing.
In this particular case what you will see is that our extra half plane which should
lie perpendicular if it is a edge dislocation and this is the Berger vector then what is
the line vector?
The line vector is sorry not the line vector but where is the extra half plane?
The extra half plane must be like this perpendicular to this Berger vector.
So now the extra half plane is over here but when you look at it carefully there are
actually two different types of layers included in here.
So let me show you like this.
So this is one layer, this is another layer.
You see these two atoms so now I will use two more colors.
So this is one atom, this is another atom, there will be another atom over here and this
is so you can see that there are two different layers getting formed one by this cyan color,
one by this light green color and these are two different planes.
So extra half plane in a FCC is not one single plane.
So that is another important concept related to FCC.
Extra half plane in FCC is actually two planes.
So this is one layer of atom or one layer of plane and this is another layer of plane.
So that is another thing which is very distinctive about FCC and very different from what we
have learnt about simple dislocations and one was this that dislocations we have looked
only at perfect dislocations but we now also get partials and both of these things will
combine when we look over here.
So now I will go back and in fact what I should do is I should draw it over here itself that
way it will become much clear that what are the two planes that I am drawing.
So here I am drawing the two different alternating planes that we see over here and it means
that even when we are talking about extra half plane we will have two planes like this
and therefore the system would look something like this.
Now let me draw the plane like this and let me complete.
So as you can see these are each of them are one plane and here you are seeing two different
planes and this correspond to let me.
So you see these two planes which are now been represented over here.
So if it were just about the full plane it would not matter whether you have same type
of plane or alternating planes but it matters because here when you look at the dislocation
where extra half plane here you have basically two.
So although the symbol is still remain same I am drawing it here as a dotted line here
just to represent that when we say extra half plane in FCC it represents two extra half
planes and when I look at this, this is the slip plane what is the slip plane?
So this slip plane is if you remember this was our 111.
So we are talking about this particular layer this whole layer has now been drawn over here.
So this whole layer that we see of the atoms is now being drawn like this and the atoms
on the top of this is what is depicted over here and where is the 110 direction over
here.
So the 110 direction you should also realize is along this like this.
Now coming back to the partial dislocations let us look at a specific example.
So let us say that my plane is 111.
So here it is given that the plane is 111 and I will now draw just 6 atoms like this
and what I have shown here this part I will now try to zoom in to this part.
So this is my b0, this is my b1, this is my b2.
So these are the partials that I talked about and before I relate I just wanted to take
a look at one real example.
So this is our b0.
So b0 if it is the 111 plane what are the possible b0?
So the b0 we can say that in this particular case it is equal to a by 2 bar 101.
Now look at the possibility how do we see that it is a possible Berger vector for this
plane or not?
Just take a dot product and it should come out to 0.
It cannot be any a by 2 110 type of direction.
It has to be only those directions which lies on the 111 plane and that you can find by
taking a dot product and when the dot product is 0.
So you will know that it lies on that plane.
So b0 is equal to a by 2 11101 and in fact there can be 3 different Berger vectors but
we have selected this one.
So this is equal to b1 plus b2 and in this particular case you would be able to show
that this b1 is actually equal to bar 211 plus a by 6 bar 1 bar 12.
Now here for this one particular example it is not very difficult to find out what will
be the Berger partial Berger vectors.
What are the 2 things you have to check?
You have to check that b1 and b2 should lie on 111 meaning again you have to take dot
product and so you can take a dot product bar 211 with 111 and you know that it is 0.
So it lies on 111 bar 1 bar 12 with 111 and you know that this dot product is 0.
So it lies on 111.
So this part is okay and the other part is that the sum of these 2 you have to make sure
it comes out to be b0.
So here you can see that so the sum should equal to b0.
So here you just take bar 2 and here it is bar 1.
So bar 2 and bar 1 as minus 3 this is minus 1 and 1 since this is 0 2 plus 1 3 and therefore
it becomes 303 but it is a by 6.
So you can divide by 6 and it becomes a by 2 bar 101.
So this becomes a by 2 bar 01.
So this is also ticked.
So these are the 2 things that you need to cross verify to find out whether the partials
that you are looking at are actually the partials for this Berger vector and it lies on this
particular plane.
So now we have looked at the different dislocations so 2 different aspects.
So let us let me just emphasize it once again the 2 important aspects for the dislocations
in FCC are the one important aspect is that here the dislocations can split or can become
partial actually I should use the word dissociate can dissociate extra half plane is not just
is sum of 2 plane.
So structure wise there are these are 2 different things that happen or that take place in the
FCC system.
So now coming back to what I drew over here this is the slip plane for a simple the dislocation
the type of dislocation that we have been using.
So it is for a but in our case we saw how it happens there are alternate layers and
when there are alternate layers and it will move what will it do?
So let us say that I have not come to that part.
So first let me tell you so here I have a dislocation and it gets dissociated so this
gets dissociated.
So now coming back to our partial dislocations so here let us say I have a dislocation and
so here the Berger vector is like this so the line vector is like this and the Berger
vector is also so I will take it as a edge dislocation so the Berger vector is like this
and I will take it as b0 and this is b1 now this is b2.
So these are the partials and this is the perfect dislocation.
Now let me draw it vectorially so vectorially how would it look like that we have drawn
it earlier also so this is b0 this is b1 this is b2 now you can see that b1 is at an angle
which means we can resolve b1 along b0 and perpendicular to b0.
So this is b0 so this is along the way and let us say if this is x direction this is
b1x this becomes b1y if this is b2 this becomes b2y this becomes b2x.
So now what happens to the dislocations what kind of interaction that takes place amongst
them?
So think over it and we will come back in the next lecture because there are now partials
which have some components so the one of the components is parallel so if this was a edge
this is also edge this becomes a screw what happens?
So think about it and we will come back next class.
