noc20-ae13-lec08_Lecture-08: Review of Compressible Flows (contd.)

IIT Kanpur July 201
20 followers
1 Video View·Dec 2, 2023
Lecture-08: Review of Compressible Flows (contd.)
So, we are talking about the normal shocks and we just started deriving the normal shock
relation and what we obtained finally in the last lecture is that the Prandtl relation
which is which provides the relationship between A star and the velocities between upstream
and the downstream. So, this Prandtl relations that we obtained this is what we can see the
proof of it. So, that is now let us say what we have is that from here what we have is
that gamma plus 1 by 2 gamma u 1 u 2 u 2 minus u 1 A star square plus gamma minus 2
gamma u 2 minus u 1 which is u 2 minus u 1.
So, now we divide u 2 minus u 1 and what we get is that gamma plus 1 by 2 gamma u
1 u 2 A star square plus gamma minus 1 by 2 gamma equals to 1. So, even doing bit of
little bit more maths what we get gamma plus 1 by u 1 u 2 A star square 2 gamma minus gamma
plus 1 which is gamma plus 1. So, once that cancels we get A star 1 is u 1 u 2. So, this
is what you get now if you solve for the A star then that can gives us like A star
equals to u 1 u 2. So, what we can do u 1 by A star u 2 by A star which is 1 and that
provides our m 1 star into m 2 star is 1 which means m 2 star is 1 by m 1 star. So, if the
flow ahead of shock is supersonic that means m 1 greater than 1 which means m 1 star greater
than 1 then from this m 2 and m 1 star relationship from this one we can say thus we will have
shock behind the flow field behind the shock where m star would be less than 1. So, if
m star is less than 1 that means the m 2 would be less than 1. So, which proves that since
m behind shock wave is always subsonic. So, this is behind normal shock because this relationship
is for normal shock relationship. Now, further one can extend this what we got from let us
say equation 13 what we do or can write m 2 m square equals to 2 by gamma plus 1 by
m star square minus gamma minus 1. So, from here what we get m star square equals to gamma
plus 1 2 plus gamma minus 1 m square. So, we can again see this is equation 20. So,
what we have is m 2 star equals to 1 by m 1 star. Now, we put equation 20 here what
we get gamma plus 1 m 2 square by 2 plus gamma minus 1 m 2 square equals to gamma plus
1 m 1 square 2 plus gamma minus 1 minus 1. Now, if we solve for m 2 that yields m 2 square
is 1 plus gamma minus 1 by 2 which is m 1 square minus gamma minus 1 by 2. So, this
is what we get. So, let us say if m 1 is 1 that means it is sonic then m 2 would be 1.
So, this is something you can say this is infinitely weak normal shock which is sort
of defined as Mach wave. If m 1 greater than 1 then the normal shock becomes stronger and
m 2 becomes less than 1. However, m 1 if it tends to infinity m 2 tends to some finite
minimum value which is gamma minus 1 by 2 gamma. So, that is comes around 0.378 for,
these are the different relationship that one can obtain. Now, again from equation 14 we get
rho 2 by rho 1 is u 1 by u 2 which is u 1 square by u 1 u 2 which gives us u 1 square a star square
that would be m star square. So, that provides the relationship like rho 2 by rho 1 is u 1 by
u 2 is gamma plus 1 m 1 square 2 plus gamma minus 1 m 1 square. So, we get an that relationship
between the density across the normal shock. So, same thing one can obtain for the pressure
let us say p 2 minus p 1 which is rho 1 u 1 by 2 which one can write rho 1 u 1 square 1 by u 2 by
u 1. So, u 1 square is gamma p 1 by rho 1. So, that is allow to write 1 minus u 2 by u 1.
Now, since this has a ratio of the velocity from equation 21 if we use value of u 1 by u 2 we get
p 2 minus p 1 by p 1 gamma m 1 square 1 minus 2 plus gamma minus 1 m 1 square gamma plus 1 m 1
square. So, p 2 by p 1 is 1 plus 2 gamma gamma plus 1 m 1 square minus 1. So, that is the
relationship between the pressure ratio across the normal shock and the other way the T 2 by T 1 is
p 2 by p 1 into rho 1 by rho 2 h 1 by h 2 1 plus 2 gamma 1 into gamma plus 1 m 1 square.
So, when m tends to infinity m 2 would be gamma minus 1 by 2 gamma which is 0.378 or p 2 by p 1
would be gamma plus 1 by gamma minus 1 which is 6 rho 2 by rho 1 would be infinity T 2 by T 1 is
also infinity. So, now using the second law of thermodynamics what we can write using second
law of thermodynamics what we can write S 2 minus S 1 C p l n T 2 by T 1 minus r l n
p 2 by p 1. So, this is what we have already derived now the S 2 minus S 1 is greater than
0 now. So, what we can do let us say if T 2 equals to T 1 and p 2 equals to p 1 then
this becomes 0, but for m equals to 1 S 2 minus S 1 equals to 0, but for m 1 greater
than 1 S 2 minus S 1 greater than 0 m 1 less than 1 also S 2 minus S 1 less than 0. So,
this is an impossible situation why now another situations since m 1 greater than equals to 1
which means m 2 has to be less than equals to 1. So, rho 2 by rho 1 greater than equals to 1 p 2
by p 1 greater than equals to 1 T 2 by T 1 greater than equals to 1 u 1 by u 2 greater than equals
to 1. So, u 2 by u 1 less than equals to 1. So, which clearly means pressure density and
temperature they increases across the shock wave and velocity actually and Mach number
decreases across the shock wave. So, that is what happens when you have a normal shock.
Now, we look at the change in stagnation properties. So, we have a normal shock here. So,
let us say we have a fluid particle like this. So, that has been m 1 greater than 1. So,
m 1 and p 1 and T 1 and S 1 this is an imaginary place let us say state 1 a where the fluid
element has been brought to rest isentropically. Now, m 2 less than 1 here where the fluid
particles. So, this is m 2 p 2 T 2 S 2 stagnation for 2 to 2 a which is p naught 2. So, this
would be p naught 1 T naught 1 S 1 p naught 2 T naught 2 S 2.
Now, from energy equation what we can write that is equation 4 using equation 4 we write
C p T 1 plus e 1 square by 2 is C p T 2 plus e 2 square by 2 for 1 goes to 1 a that means,
the fluid particle from here this was brought to rest which is a sort of an imaginary point
isentropically the then this should be C p T 1 equals to C p T naught 1. Similarly,
for 2 to 2 a C p T 2 is C p T naught 2. Now, C p T naught 1 is C p T naught 2. So, that
means, what we get the stagnation temperature stagnation temperature remains constant across
a stationary normal shock wave in a calorically perfect which is C p C. That means, now this
is very important that we say it is a stationary normal shock wave because if the normal shock
wave is moving then this condition may not be valid. So, when the shock wave is stationary
and it is a normal shock wave then the stagnation temperature across the normal shock wave remains
constant. In general, the stagnation enthalpy is constant
across a stationary normal shock. Now, for chemically reacting gases if there is a chemical
reaction then T naught 1 would not be T naught 2 since C p is not constant anymore. Now,
consider the changes between the imaginary states 1 a and 2 a S 2 a minus S 1 a which
is l n minus r by p 1 a and what we have S 2 a is S 2 S 1 a is S 1 T 2 a is T 1 a equals
to T naught and p 2 a is p naught 2 p 1 a is p naught 1. So, what we get S 2 minus S
1 minus r l n p 2 by p naught 1. So, what we could write p naught 2 by p naught 1 is
S 2 minus S 1 by r. So, that is what you get for stagnation pressure ratio relationship.
Since S 2 minus S 1 greater than 0 p naught 2 by p naught 1 would be less than 1 which
clearly means then the total pressure or stagnation pressure decreases across a normal shock.
Now, we can get the density 2 rho naught is p naught by r T naught. So, what we can
write rho naught 2 by rho naught 1 p naught 2 by p naught p naught 2 by T naught 2 into
T naught 1 by p naught 2 p naught 1 which is since the stagnation temperature is same
this will become p naught 2 by p naught 1 which is also less than 1 means the stagnation
density is also. So, is rho naught 1 that means across normal shock stagnation pressure
and density decreases whereas, stagnation temperature remains constant. So, what we
had is that fluid particles from here. So, this has gone to state 2 a and this has gone
to 1 a. So, this is 1 this is 2 for adiabatic 1 D flow we can again write C p T 1 plus e
1 square by 2 is C p T 2 plus e 2 square by 2 which will get us C p T 1 plus C p T naught
1 and C p T 2 plus C p T naught 2 in C p T naught 1 equals to C p T naught 2 T naught
1 equals to T naught 2 since C p is constant and again we can write the change in entropy
which is delta S let us say S 2 minus S 1 C p ln T 2 by T 1 r p 2 by p 1.
So, the delta S is 0 which is C p T ln T 2 by T 2 equals to r ln p naught 2 by p naught
1. So, we convert things in the terms of stagnation condition. So, what we get ln p
naught 2 by p naught 1 would be 0 means p naught 2 by p naught 1 is 1 that is p naught
2 is p naught 1. So, from perfect gas law what it gets p naught equals to rho r T naught.
So, that means rho naught is p naught r T naught which is constant. So, this brings
to a very important conclusion that for isentropic flow p naught T naught rho naught are constant
everywhere in the. So, which means whenever you have an isentropic flow your stagnation
properties remains constant everywhere, but whenever you have stationary normal shock
just again I am reiterating that it is a stationary normal shock then your stagnation density
stagnation pressure that decreases, but stagnation temperature only remains constant and across
a normal shock density increases I mean static density increases static pressure increases
static temperature increases whereas, the flow velocity decreases in the downstream
of the shock. So, that is pretty much what we wanted to
talk about in normal shock relations. So, what we will do we will just talk about the
oblique shock and other stuff in the next lecture we will stop about this here today.
