Lecture 15: Tutorial 3

IIT Roorkee July 201
61 followers
1 Video View·Dec 1, 2023
Hello everyone, now we will discuss on some numerical problems based on our last 4 classes.
So the first problem, the statement is find out the DO in aerated water at 25 degree centigrade
in a treatment plant. K H of O 2 at 25 degree centigrade is 1.26 into 10 to the power minus
3 M per atmosphere. So K H is the Henry's constant and molecular weight of oxygen is
32 gram per liter, it is given. So we have to find out the DO in aerated water. As you
know that in any river stream or in aerated water, so oxygen present in air and oxygen
present in water. So these are in equilibrium and what will be the equilibrium concentration
of oxygen in water phase that is defined by this formula that is K H is equal to concentration
of oxygen in aqueous phase divided by partial pressure of oxygen in the atmosphere or in
the air where the water is in contact with the air.
So this K H is nothing but Henry's constant. So this value is given here 1.26 into 10 to
the power minus 3 mole per atmospheric pressure. Therefore, we need to calculate oxygen concentration.
So K H into partial pressure of oxygen. So we have to get this formula aqueous concentration
of oxygen is equal to K H into partial pressure of oxygen. Now what is the partial pressure
of oxygen? If it is 1 atmospheric pressure, then partial pressure we can calculate on
the basis of volume fractions if we know. So as we know for air, the 21 percent is for
oxygen and around 79 percent is for nitrogen. If we ignore the other impurities, almost
this is that we know. So on that basis, we can calculate that partial pressure of oxygen
is nothing but 0.21 atmosphere when the total pressure is 1 atmospheric pressure.
So K H value we will put it here 1.26 into 10 to the power minus 3 mole per atmosphere
into 0.21 atmosphere. So atmosphere will get cancelled. So we are getting a 0.0002646 M.
So then the 1 mole of oxygen is equal to 32 gram. So we will multiply it here 32. So it
is a gram. So if we want to convert it into Mg, we will again multiply by 10 to the power
3. So this into 32 into 10 to the power 3 that is equal to 8.467 Mg per litre. So this
is the concentration of the oxygen in the water. So now the problem 1 is solved.
Now we are coming to problem number 2. So the statement is acetic acid that is CH3COH
or vinegar is oxidized to carbon dioxide and water by microbial action. A vinegar manufacturing
plant has 50 Mg per litre of acetic acid in its effluent waste water. The plant flow is
500 meter cube per day. How much oxygen is required each day to oxidize the vinegar?
So that we have to calculate. So we will be writing the stoichiometric equations and then
we will get the mass balance and balance the equation. Then we will find out what is
the oxygen requirement for the degradation of it.
So first the equation must be balanced. This equation that is acetic acid will react with
oxygen and it will give us carbon dioxide and H2O. So if we get the balance, so 2 moles
of oxygen is required to react with 1 mole of acetic acid to give 2 moles of CO2 and
2 moles of H2O. So in this case 2 moles of oxygen are required to oxidize the acetic
acid to carbon dioxide and water that I have discussed. So the amount thus the amount of
acetic acid to oxidize each day what will be that we have 50 Mg per litre of acetic
acid. We have 50 Mg per litre of acetic acid and then we will convert it into gram.
So divide it by 1000 and we have 500 meter cube per day effluent generation capacity.
So multiply it and then this is 1 meter cube is equal to 1000 litre. So we will multiply
it 1000 again and then 1 mole acetic acid divided by 60 gram because we are converting
it into mole. So acetic acid you see CH3COOH, so it is giving 12 plus 3 plus 12 plus 2 into
16 plus 1. So we are getting 12 plus 3 plus 12 plus 32 plus 1, so that is equal to 60.
So that molecular weight of acetic acid is 60 gram. So then by this expression we are
getting acetic acid concentration will be this much this mole per day.
So now since 2 moles of oxygen are required for each mole of acetic acid as per our previous
expression the required oxygen is equal to how much how many moles of acetic acid we
are having we will be multiplying it with by 2 mole oxygen. So that is equal to 834
mole oxygen per day because the MHAc was 417 mole per day. So now oxygen which will
be required that is 834 mole per day. So then what will be the mass of this oxygen will
be multiplied it with the molecular weight of oxygen that is 32 gram per mole, so that
is 32 gram oxygen.
So that is equal to becoming to 26700 gram oxygen per day that is equal to 26.7 kg oxygen
per day. Now the problem number 2 is solved. Now we will see the problem number 3 the statement
is if 500 mg per liter ethanol a biodegradable compound is completely oxidized calculate
theoretical oxygen demand chemical oxygen demand ultimate biochemical oxygen demand
BOD 5 and total organic carbon if Kd is equal to 0.023 per day. So we have to calculate
all those things that is THOD COD and ultimate BOD BOD 5 and TOC.
So now we will see the conversion the equation that is C2H6O ethanol C2H5OH plus 3O2 it is
giving us 2CO2 plus 3H2O. So this is the stoichiometric expression. So theoretical oxygen demand we
can assume that 100 percent conversions of this ethanol is possible by the oxygen. So
then what will be 1 mole ethanol requires 3 mole oxygen. So 3 into 32 gram of oxygen
per 46 gram of C2H6OH that is C2H5OH C2H5OH. So this is molecular weight nothing but 46.
So this 46 gram of C2H5OH and then that is equal to by this expression by solving this
2.09 gram of oxygen per gram of C2H6O. So that is equal to we can write 2.09 mg of oxygen
per mg of C2H6O because this is gram per gram so mg per gram mg per mg that will be same.
Now what is given that 500 mg per liter ethanol concentration. So 2.09 into 500 mg per liter
that will be the oxygen requirement. So we will multiply it here we multiply 2.09 with
this 500 and get 1045 mg per liter or ppm. So that is the oxygen requirement theoretically.
So that is theoretical oxygen demand. Now COD is equal to BOD ultimate that is equal
to theoretical oxygen demand. So COD will be same and ultimate BOD will be this one
and theoretical oxygen demand also this one in this case and then BOD phi we have to calculate.
And if we want to calculate the BOD phi we have one formula that BOD phi at any time
t is equal to ultimate BOD into 1 minus e to the power minus k into t. So that is equal
to L u into 1 minus e to the power minus k t that we have discussed in our previous class
or we will discuss later also. So here BOD phi so in this case t equal to phi t equal
to phi when we will be taking the BOD phi then it will be t equal to phi and this k
is nothing but this value is given. So L u we are getting here so we will be putting
this value that is equal to 2.09 gram oxygen per gram of C2H6O. So we multiply this with
this 1 minus e to the power minus k t this function.
So e to the power minus 0.023 into 5 so that we are getting 0.23 gram of oxygen per gram
of C2H6O or that is equal to how much we can write. So if it is this gram of this
that means 0.23 into 500 that will be our PPM as mentioned here and the similar way
we can get the value as this PPM of BOD phi. And what is total organic carbon TOC total
organic carbon so here organic carbon present here 2 into 12 that is equal to 24 out of
46 gram. So that way we will be calculating the theoretical oxygen demand total organic
carbon is 2 into 12 divided by 46 gram of TOC per gram of C2H6O so that is we are getting
equal to 0.52 gram of TOC per gram of C2H6O and that is equal to 0.52 into 500 because
we have 500 mg per liter so that is equal to 260 PPM.
So now we are able to calculate all the values as asked in the problem statement. Now we
will move to problem number 4 the statement is the reported chemical concentration of
a mineral water is sodium plus 0.65 mg per liter potassium plus 0.4 mg per liter Mg2
plus 19 mg per liter Ca2 plus 35 mg per liter Cl minus 0.8 mg per liter SO4 2 minus that
is 14.3 mg per liter. So HCO3 minus so this will be superscript here all are these 2 minus
superscript so that is equal to 189 mg per liter NO3 minus that is equal to 3.8 mg per
liter the pH of the water is 7.3.
Then what is the hardness of the water in mg per liter calcium carbonate we have to
calculate we also have to calculate we also have to see is the chemical analysis correct
okay so what we will do we will see the error in the ion balance so ion balance error is
necessary to be calculated. So in this case calcium plus 2 2 plus calcium 2 plus is equal
to 35 mg per liter we will be converting it into mg per liter form.
So at first we will be 35 mg per liter and then we will divide it by the equivalent weight
of it what is the equivalent of calcium that is equal to T is the molecular weight and
divided by 2 valency so that is equal to 20. So then this one 35 divided by this 20
multiplied by the equivalent weight of this calcium carbonate so then that is equal to
nothing but 100 by 2 molecular weight of calcium carbonate 100 so divided by 2 is equal to
50 that is the equivalent weight of calcium carbonate.
So that way we are getting calcium 2 plus is equal to this into this divided by this
by this that is equal to 87.5 mg per liter as calcium carbonate the similar type of calculation
we have already done in our previous classes. So similarly for magnesium 2 plus we have
19 mg per liter so divided by this in this case of magnesium 24 molecular weight by 2
so that is your equivalent weight so that is and that equivalent concentration will
be converting it in terms of calcium carbonate so we have to multiply it with the equivalent
weight of the calcium carbonate so that is 100 divided by 2.
So then we are getting 79.2 mg per liter as calcium carbonate and total hardness then
calcium plus calcium 2 plus and magnesium 2 plus so we are having 87.5 plus 79.2 that
is equal to this one this is not so 166.7 so 87.5 divided by 79.2 so 166.7 this is not
so convert the concentration of the major cations and anions to equivalents per liter
then sum of the cations and anions to see if there are within 5 percent that means we
are going to calculate the error in the ion balance.
So sum of cations mill equivalent if we calculate and then we can get the difference then we
will get the ratio difference by sum into 100 so that will be the error. So we are having
here Ca2 is 35 Ca2 plus is 35 mg per liter so that we can divide it by 1000 so it will
be gram per liter then multiply it with this 2 equivalent for 40 gram so that is equal
to 1.7 into 10 to the minus 3 equivalent per liter.
Similarly for magnesium 1.6 into 10 to the minus 3 equivalent per liter and potassium
is also 1 into 10 to the minus 5 equivalent per liter and Na plus is 2.8 into 10 to the
minus 5 equivalent per liter and sum of the cations equals to if we sum up all those 4
cations then we will get 3.338 into 10 to the minus 3 equivalent per liter and then
in case of anions so we have HCO3 equal to how much 139 mg per liter. So we can convert
it we can get it from 3.1 into 10 to the minus 3 how because we have to divide it 189 divided
by 61 the equivalent rate of HCO3 so that we are it is coming 3.1 into 10 to the minus
3 equivalent per liter already similar calculations we have done in our previous class so detailed
calculation is not shown here.
So similarly chloride we can get 2 into 10 to the minus 5 equivalent per liter and SO4
2 minus this is equal to this one and NO3 minus is equal to this one. So sum of these
anions we get by summing up so 3.481 into 10 to the minus 3 equivalent per liter. So
what is the error so this minus this divided by this plus this okay so error if we take
here is equal to say cation is this one anion is this one okay then what is the percentage
of error with respect to this is the percentage and if we take this 3.338 minus 3.48 divided
by 3.338 plus 3.481 so because the sum of all cations and anions are within 5% of each
other we can assume that the analysis is correct.
Now we are coming to problem number 5 the statement is the average airborne concentration
of chloroform was found to be 0.4 microgram per cubic meter at 293 K and 1 atmospheric
pressure and the mean concentration of chloroform in water was estimated to be 42 microgram
per liter. A typical adult inhales 20 cubic meter of air and ingests about 2 liter of
water per day. Compare the exposure via inhalation with the exposure via ingestion.
So now we will see let us take a basis what is this the air consumption per day is equal
to 20 meter cube cubic meter or meter cube water consumption is 2 liter so chloroform
present in 20 meter cube air is equal to 20 into 0.4 microgram so that is equal to 8 microgram
chloroform present in 2 liter of water is 42 into 2 84 microgram thus intake of chloroform
per day through water that is 84 is more than the intake through air.
Problem number 6 statement is concentration of thorium in monazite sand is 0.04 microgram
per liter how much thorium is present in 100 kg of sand bulk density of sand is 1650 kg
per meter cube so our basis is 100 kg sand so what is the volume 100 kg and it is given
this kg per meter cube so 1650 kg per meter cube so if we want to convert it in terms
of liter basically volume so we have to convert this meter to meter cube to liter so that
is 1000 relationship so that 1000 is coming at the numerator so 1 100 kg into 1000 l per
meter cube by 1650 kg per meter cube so that is equal to 60.61 liter.
Now amount of thorium in 100 gram in 100 kg sand that is equal to 0.40 per liter into
this much of liter we are having volume so will be multiplying it with 60.61 liter so
that is equal to 2.42 microgram now we are coming to problem number 7 so the statement
is mole fraction of aqueous glucose solution is 0.025 what is the molar and mass concentration
of glucose assumption density of the solution is 1.
So now as per the statement for every 0.25 moles of glucose there are 0.975 moles of
water because the solution is glucose and water so 1-0.025 that is equal to 0.975 moles
of water so 0.025 moles of glucose for 0.975 into 18 gram of water because molecular weight
of water is equal to 18 so that is equal to 17.55 gram or we can consider that 17.55 ml
of water because their density is 1 gram per cc.
Now 0.025 divided by 17.55 into 1000 moles of glucose in 1 liter of water so that is
equal to 1.42 moles glucose per 1 liter that is equal to 1.42 so the solution strength
is 1.42 molar.
So molecular weight of glucose is equal to you can calculate here C 6 H 12 O 6 so it
is coming equal to 180 so we will be what we will do we can multiply it 180 into 1.42
so we will be getting 256 gram per liter alternatively the mass concentration we can calculate 180
into 0.025 divided by 17.55 into 1000 the formula which we have used here so that we
can get 256 gram per liter.
So now we are able to find out the molar concentration and mass concentration of glucose in water.
Now problem number 8 the statement is 10 gram of table salt that is initial in pure water
is dissolved to make 1 liter of solution determine for N a plus the mass fraction percentage
ppm mass concentration molarity normality mole fractions in the solution.
So molecular weight of initial is equal to you know 23 for sodium and then 35.5 for chloride
so that is 58.5 and then 10 gram initial how much 10 divided by 58.5 that is equal to 0.17
mole initial.
So N a plus is equal to 0.17 mole into 23 gram per mole so that is equal to 3.91 gram
of sodium plus so mass of mass fraction in salt you know how much so 3.91 into 100 divided
by 1000 why because 3.91 gram is sodium and the total is say 1 kg so 1000 gram if we consider
the density 1 so this 3.91 by 1000 into 100 so this is the mass fractions in salt so we
are getting equal to 0.39 percent and if we want to convert it into percentage to ppm
we have to multiply it with 10 to the power 4 factor so then we are getting 3900 ppm.
Then mass concentration if we want to calculate then 3.9 gram per liter that is equal to 3900
mg per liter in aqueous system we can get it and then molarity is 0.17 mole per liter
or 0.17 molar and normality 0.17 equivalent per liter that is equal to 0.17 N normal because
it has valence equal to 1.
So mole fraction now if we want to get the mole fraction so how many moles of sodium
is there and how many total moles are there that water plus sodium so 0.17 moles we have
got for it and another will be for mole will be for water so we have 10 gram so 1000 minus
990 that will be for water mass divided by 18 so that will number of moles of water so
this plus this mole of water total mole and so this mole by total mole is equal to mole
fraction so we are getting 3.08 into 10 to the power minus 3 so as per the problem statement
we are able to solve it.
Now we are coming to problem number 9 so the statement is a water sample is known to contain
calcium sodium chloride and bicarbonate the result of an analysis were as follows calcium
60 mg per liter sodium 46 mg per liter chloride 71 mg per liter molecular weight calcium we
know that 40 sodium 23 chloride 35.5 bicarbonate 61 calculate concentration of bicarbonates
percentage sodium and RSA also comment on suitability of this water for irrigation applications
so this is our problem statement we have to solve it.
So what we will do at first we will do the estimation of the concentration of bicarbonate
the first question so here we have to calculate the concentration in milliequivalent per liter
so we are calculating for calcium 2 plus that is you have 60 mg per liter so 60 divided
by this equivalent rate that is 3 milliequivalent per liter because the concentration is mg
so milliequivalent per liter similarly for sodium plus we are having 46 mg so divided
by 23 that is the equivalent rate of it so 2 milliequivalent per liter for chloride we
are having 30 we are having 71 mg per liter so divided by 35.5 that is almost 2 but it
is not given how much bicarbonate is available but we have to calculate from the ion balance.
So sum of cations we are getting this 3 plus 2 that is 5 milliequivalent per liter and
if there is no error in the ion balance if we assume then we can assume that the sum
of the anions will also be 5 milliequivalent per liter.
So in that case bicarbonate concentration will be the total anion concentration minus
the concentration of chloride so that is total is equal to 5 and minus chloride is equal
to 2 so 5 minus 2 that is equal to 3 milliequivalent per liter or 3 into 61 that is your molecular
rate equivalent rate so that is equal to 183 mg per liter so that is the concentration
of bicarbonate and then you have to calculate percentage sodium and RSC.
So for the calculation of percentage sodium the formula is sodium concentration divided
by sum of the concentration of sodium plus potassium plus calcium plus magnesium into
100.
So in this case we have calcium and sodium no potassium no magnesium so we are having
this will be 0 so calcium we have potassium and magnesium 0 so we are having 2 for sodium
and 3 for calcium and 2 for sodium so that 2 by 3 plus 2 into 100 so that is equal to
40 so that 40 percent sodium is there and for the second RSC, RSC is equal to how much
this is the formula CO 3 plus HCO 3 minus Ca 2 plus plus Mg 2 plus.
So now in this case Mg is not present so 0 CO 3 is not present 0 so bicarbonate is 3
and carbonate and calcium 2 is also 3 milliequivalent per liter so 3 minus 3 equal to 0.
So we are able to solve the second part and in the last part of this problem it was asked
to comment on the suitability of the water for applications in irrigation.
So we know that there are 2 criteria one is your percentage sodium or RSC so if percentage
sodium value is less than 60 or RSC value is less than 1.25 milliequivalent per liter
then the water is suitable for applications in irrigation.
So in this case these values are 40 percent and 0 so this is satisfying the conditions
for both percentage sodium and RSC values so therefore the water is safe for the irrigation.
Now the problem is solved so up to this in this class thank you very much for your patience.
