Valve Shrader ou Presta, BAR ou PSI, pression minimale et maximale... On fait le point sur toutes les infos essentielles pour gonfler correctement ses pneus et éviter les risques liés à une mauvaise pression dans la chambre à air !
✨ Commandes ta pompe chez Jungle Bike et profites de -15% sur ta commande avec le code VOIESRECYCLABLES ✨⬇️
Hello everyone, welcome to this bike mechanics tutorial dedicated to inflating tires.
So yes, it may seem very basic, the inflating of the tires, but yet it is essential for the good operation of a bike.
And from experience, there are a lot of bikes that are underinflated, we see a lot of people riding with a flat rear tire.
And so we're going to see why it's not good, why you need a good tire pressure,
what it will change on our bike practice, on the longevity of the tire.
And we're also going to talk about valves, we're going to talk about pumps.
So this episode, and like all the mechanical episodes we're going to release,
they are in partnership with Jungleback, which is a small French company
that will offer you bike parts, equipment, clothes too, to equip you for the winter or for the rain.
And they will practice prices just with suppliers and customers.
This small company is a good alternative to the big bike parts platforms.
So especially for you, we're going to do a direct selection of the products you might need,
in this case a bike pump, directly on the Jungleback website.
So you will be able to click on the link in the description to have access to the product selection that we have prepared for you.
And a small promo code is waiting for you with the code VOIRRECYCLABLE, which is also listed in the description.
So the first thing to know to inflate your tire is what type of valve you will have to use.
There are two major types of valves in the bike, mostly used.
There are others, but in a smaller minority, so in 99% of cases you will use one of these two valves.
Here, the big valve, the Schrader valve, which is less and less used,
and which is rather used on VTCs or on rather entry-level air chambers.
More and more, we will find this valve, the small valve, which is the Presta valve.
Its particularity, we will see it later, is that you have to unscrew the small nut on top before you can inflate.
But we'll see that later.
On my bike here, we will see that I have a Presta valve.
So, as I said, the valve is thinner, so we can already see it.
And there is often a small washer that holds the valve to prevent it from wriggling like this.
And then anyway, when you remove the cap, you can see the Presta valve very well.
The cap, despite what you might think, is not at all essential on an air chamber.
It's really there for aesthetics and to protect a little bit from dust,
but it's not going to make your air chamber deflate or not.
If you have a puncture and you don't have a cap, it's very likely not from here,
but rather from an internal puncture in the air chamber.
Then, you will have to determine how much pressure to inflate the tire.
So, this will depend a lot on your practice, already, and then especially on the width of the tire.
Here, my tire is quite wide, so we're not going to put too much pressure on it.
Unlike a road tire, a very thin road tire, where we're going to put a lot of pressure in it.
A wide road tire requires little pressure.
A thin road tire requires a lot of pressure.
Most city bikes are, let's say, in an intermediate section,
where we're going to have a fork, usually between 3 and 5 bar of pressure.
But you can find this indication by the manufacturer on the side of the tire.
So, here, it's very clearly written, the section of the tire.
We'll detail it in another video, because this is another hassle.
The tire pressure written below, 50 max psi.
There are two units for the pressure, the bar and the psi.
A bar is worth 15 psi, roughly.
If you remember the info, it's good, if not, it doesn't matter.
Most pumps include a psi and bar pressure gauge at the same time.
So, here, it's okay, because my tire is all beautiful, all clean.
We can clearly see the inscriptions, but it's not uncommon to have a tire that's a little rough,
a little damaged, like this one.
You really have to look at the inscriptions on the tire.
It will necessarily be written.
Here, on my old Schwalbe, I have between 2.5 and 5 bar.
So, these are the tires we used on the road.
And so, between 2.5 and 5 bar, it also depends on the weight you put on the bike.
On the road, we put around 4 bar.
When we are on an empty bike, in this tire, I put 3 bar,
since there was no need to support so much load,
and therefore no need to inflate at higher pressure.
So, let's move on to the inflating demonstration.
Here, I have a Presta type valve, if you followed well.
It's the little valve.
So, you're going to have to unscrew the little nut, which is here, all the way to the end.
In fact, we have an anti-return flap,
which will make sure that when we come to put pressure, it will inflate.
And when we don't put pressure, the flap prevents it from deflating.
So, that's why you have to unscrew it all the way.
We're going to screw our tip directly on the head, all the way to the end as well.
And we come to inflate at the pressure recommended by the manufacturer.
So, here I have a bare air chamber.
So, right now, we're going to see a little bit what it looks like.
There you go.
And when I'm done inflating, well, I just unscrew my tip.
There may be a little bit of air escaping.
It's normal, it's not embarrassing.
And above all, don't forget to screw the little nut back on here.
Because if we don't screw it back on, it's sure we're going to end up flat very quickly.
There you go.
So, if you have a cap, put it back on.
But otherwise, it's all good.
It's ready to roll.
Second valve, the Schrader type valve.
So, this one is even simpler, since there is absolutely nothing to do before inflating.
We just screw our tip on it.
And then, let's go.
We can inflate.
And there you go.
I just have to take out my tip.
So, this is why it is essential to have a pump with a manometer.
If you don't have a manometer, you can't know how much pressure your tire is inflated.
And so, it's useless.
So, often, small pumps integrate a manometer directly into the pump.
Which allows you to monitor your pressure in real time.
And it's still much more practical.
To finish, we're going to see why it's important to inflate your tire at the right pressure.
If there are measures that are recommended by manufacturers, it's not for nothing.
And it's for optimal tire use.
Here, in the center of the tire, we're going to have what's called the tread.
And this band is made to be in contact with the ground in an optimal way.
Calculated way.
That's why this tire is going to have a certain shape, a certain rigidity.
And so, if we inflate my tire too much, the tread will be thinner.
And so, my tire will not be in contact with the ground in an optimal way.
And so, it will already reduce the adhesion that the tire will have on the ground.
And it will also limit the life of the tire.
Since it will be more compressed by the pressure.
And so, potentially, the tire will crack faster than if it is inflated at the right pressure.
Conversely, if the tire is underinflated, it will tend to be crushed like that on the road.
The tread will be bigger.
And so, the tire on the sides will tend to crack and damage.
And potentially, to tear prematurely.
And when we know the price of a good tire, we will try to prolong its lifespan as much as possible.
So, an underinflated tire is also synonymous with additional effort.
Since when we have a tire that is really underinflated, deflated,
we will have the impression that we are forcing a lot more to move forward.
And it's really not pleasant.
Conversely, when the tire is overinflated, we will have the impression that we have a better tread.
Indeed, we will have a better performance.
But this will be at the expense of the longevity of the tire.
So in this case, if you want a narrower tread,
I simply advise you to switch to a narrower tire for which you will have a better performance.
And not to overinflate a tire.
If you want to change tires, I advise you to watch our next tutorials.
We will do something specific on the tires.
Because it's a real hassle depending on the dimensions and width of the tires.
So don't do that quickly.
Or what you can do is take the reference of the old tire to check that the next one will be compatible.
But if you have to change, especially, find out.
It's not done in any way.
And you may end up with a tire that is too big or too small.
To help you put the right tire pressure on your bike,
we have made a small selection of pumps on the Jungle Bike website.
So click on the link in the description.
I have chosen two pumps specifically to inflate your bikes.
One for the house, a foot pump.
With a hoop to put your foot to be able to pump harder.
And a small travel pump similar to this one.
Which will be from the Michelin brand.
Which is very practical to embark with you for your outings.
Do not forget the promo code that you have in the description.
With the code VOIRECYCLABLE you have a small discount.
Which can always be nice on the purchase of your product.
If there are things that are not clear, do not hesitate to put them in the comments.
We will come back to it, there is no problem.
And I'll see you soon for other Meccano tutorials.