Lecture 05 Module 2

IIT Kanpur July 201
20 followers
Oct 22, 2023
So, let us do one example, a live example of how thisincremental equivalent stuff is
useful to us, right. So, what is themost common non-linear element that you are familiar with?
I am sure the first non-linear element that we have encountered in previous courses is
a is a diode is a p-n junction diode, right. So, let us replace let us replace our non-linear
element with a p-n junction diode. This R is equal to 1 kilo ohm. Let us say this voltage
is 1 volt and I know I know the current voltage relationship of a diode. What is the current
relationship of a diode? If I sketch, if I you say this is a diode, the voltage across the diode
is V d and let us say the current through it is I d, right. What is the typical current voltage
relationship of a diode? It is it goes like exponentially when it is forward biased,
right and it goes something like this and this is reverse biased. Now, this has to go through 0
which I am struggling to draw. So, this is not to scale. So, this is let us say I s and what is
the current voltage relationship? It is typically we express it in this form I d is some I s
exponential V d over V t minus 1 where V t is approximately equal to 25 millivolt at 300 Kelvin.
Again, this is not exactly 25 millivolt. We make our life easy by making it 25 millivolt. It is
26 millivolt closer to 26 millivolt than 25, but 25 is a very friendly number. So,
let us go with that, ok. So, now, as you can clearly see this is a non-linear equation. So,
we need to figure out, we need to figure out, we need to figure out the currents and the voltages,
right across and through this diode or in this network. So, essentially what we are saying is
if I know this, how do I figure out this current I d and for that you will have to resort to some
graphical method, right and you can write out, you can write down the equations. What you,
what will you do? How will you go about writing it? So, we know that V d I d V d characteristics
is this. So, essentially I is common. So, what will you do? We will write the current through
the diode, right is I which is equal to I s exponential V d over V t minus 1. This is equation
1 and what is the other equation? The other equation is this current is also the current
through the, through the resistor and that is nothing but 1 minus V d by 1 k, correct.
So, now this is equation 1, this is equation 2. You can solve them, you can solve them using
numerical analysis or you can say that I will sketch the, on the I d V d characteristics of,
of the diode. I will also sketch the current through the resistor. Let us say the current
through the resistor goes like this. So, let us say this is 1 minus V d over 1 k and I will plot
it and I will find out where these two plots intersect, right and I will say that this is
my actual solution. Let us say this is V d q, this is I d q, where q refers to the quiescent,
quiescent currents, ok. So, I can do all these things and let us say I have done that, let us
say I have done that and I have found that, right. So, let us assume, let us assume V d q is equal
to, is approximately equal to 0.7 volts, right. This is an approximation that, that we generally
take in case of a diode, a diode that is, that is we say if the diode is on, right depending
upon the type of diode, let us say it is a silicon diode and if we have certain ranges of currents,
we say that the, the on voltage is 0.7 volts, but note that this on voltage, this concept of
on voltage does not anyway mean that if the diode is on, the value of V d q is 0.7 volts,
it does not mean that. It essentially, it is an approximation that holds for certain ranges of
currents, right. If the ranges of currents changes, let us say, so for example, in this case if V d,
q equal to 0.7 volts, what is the current, what is the current? I is equal to 1 minus 0.7 by 1 k,
that is 0.3 milliamps, ok. So, so as you will see that if you plug in these numbers, right,
if you plug in these numbers into the diode equations, you will see that it will not be
an exact match, but it will be a ballpark match. However, however, if you, if you now say that,
I, I, I, however, if I now, now say that the resistance is instead of 1 k is like 10 ohms,
right, right. If the resistance is 10 ohms, then if I use the same equation, this current will,
will suddenly jump to like 30 milliamps. So, if it jumps to 30 milliamps, then obviously,
your V d, q value will not be 0.7 volts, it will be something different and that will be
governed by the, that will be governed by the I d V d characteristics of the diode.
So, as it turns out for a certain ranges of current, these 0.7 volts, 0.65 volts values
that we generally take, hold true to, to some extent, to some extent, but it is not
ubiquitously true. For this course, let us, we will, we will assume, we will assume that since
we will be operating under current ranges of a milliamp or so, we will again say that,
let us assume V d, q to be equal to 0.7 volts, right, but you should always keep it in the back
of your mind that it is not as if there is this concept of cutting voltage that suddenly before
0.7 volts, a diode starts, I mean diode is off and after 0.7 volts, a diode is off, diode starts,
starts to contact because clearly your I d V d characteristic does not point to that, ok.
So, this is an approximation that we, that we take, fine. If, if my quiescent voltages and
currents are these, what is the next step? Now, if I tell you that I want, I want to know what
is, now I want to know what is the total current if my input is, let us say, 1.1 volt and I have
used the same diode, same resistance and so on, right. So, I want to know, let us say, V naught,
ok. So, what should I do? Note that I already have the information of what was the case when,
when, when V d q was 1 volt, rather V d q was 0.7 volts, right. When input was 1 volt,
let us say this is equal to 0.7 and I d q is 0.3 milli, right. So, let us say we,
that is how the graphs are, right. I just pulled something out of the hand.
Now, what I am asking is, now what I am asking is that I want to find out a different,
a different solution for, for the case of when input is 1.1, right. So, essentially what am I
asking? I am asking is that my, if the input changes to 1.1, I know that this curve will
shift, right. So, essentially now what we are asking? We are asking what is this new, new,
new point, right, new current point. So, one option will be, let us plug in these values again,
express this graphically, but now we know that we need not do that, correct. Why? Because I
know I can replace, I already have the values for 1 volt, right. We already have the values
for 1 volt input. All we need is the values for 1.1 volt input, so right. So, what, what am I
saying? What am I saying? I have already have a value for 1 volt input. I need to find out what
is the value for 0.1 volt input, correct. So, essentially what am I saying? I am saying
I already had this battery of 1 volt. What am I doing? I am applying another increment on top of
it 0.1 volt. I knew that I had a quiescent current of 0.3 milliamps. I am trying to figure out what
is the new quiescent current is or let me call, simply call this delta I. So, this is, this is the
current or and I knew that the voltage across the resistor was in case of 1 volt was how much?
Voltage across the resistor, so this was 0.7. So, the voltage across the resistor was 0.3.
This voltage across the resistors was 0.3 volt, but I am asking what is the extra delta V,
right? What is the extra delta V R, right? Voltage across the resistor, right? We know the,
we know the black, we know the condition under the black inputs. We now need to know the condition
under the orange inputs and for that what we need to do? We need to sketch the incremental
equivalent, right? So, what is the incremental equivalent? We replace, we replace all the
elements with the incremental equivalent, right? So, what is, let us start from, from the left.
What is the incremental equivalent of the DC 1 volt? The incremental equivalent of DC 1 volt,
DC battery is a short circuit, correct? What will you do with the incremental input? This is the
delta V. This is the incremental input. We have to retain the incremental input, right? So,
so this retains as 0.1 volt. What will you do with the, with the, with the, with the diode?
We have to replace the diode with some non-linear, some linearized version of it,
right? We will have to quickly figure out what is the linearized version of the diode and we
have to replace the resistor with this linear incremental equivalent which is a resistor of
same value, right? So, this is 1k. So, now what is the missing piece? The missing piece is what
is the incremental equivalent of the diode, right? So, in a forward bias diode, right?
I d is I s e to the power V d over V t minus 1, right? So, if V d is greater than V t by a factor
of more than 3, let us say, I can simply neglect the minus 1 term and I can say that I d is equal
to I s e to the power V d over V t, correct, ok? This basically eases our life, right? I mean we
have already figured that V d is 0.7 volt and V t is 25 millivolts. So, the ratio is quite more than
1. So, we can safely neglect that. So, which essentially means that this is the I d V d
of the diode. So, what is, so this is my f of V, right? So, what is del f del V for certain
quiescent point V d q? This is nothing but del I d del V d around an operating point of V d q,
right? Which is nothing but in this case I s by V t e to the power V d over V t which is nothing
but I d q by V d. So, this is evaluated at V d q. Since this is evaluated at V d q, I get del f del
V to be I d q by V t, right? So, now, this is what is this element? What is this element? This
element is nothing but 1 over del f del V evaluated at V d q which is nothing but V t over, correct?
So, what is this? What is the unit? What is the unit of this V t over I d q? We did del I del V,
right? Del I del V is conductance 1 over del I del V the resistance. So, essentially the diode
forward bias diode gets replaced with a resistance with a small signal resistance, right? The small
signal resistance let us call it R d whose value is equal to V t over I d q, correct?
One important thing to note here, one important thing to note here is that the value of the small
signal resistance depends on the quiescent resistance, quiescent current, right? The
value of the small signal resistance depends on the quiescent current and that makes sense. It is
it is a non-linear device. Since it is a non-linear device, it makes sense that its derivatives can
depend on where are you where in the in the I d V d characteristics you are taking the derivatives,
right? If it is independent of wherever you are taking the derivatives, then it is very
likely that the stuff is fully linear, ok? So, now what are we after? We are after delta
V r and what will be delta V r? So, this will be our delta V r. So, what is delta V r? So,
let me be consistent and use the same orange color. So, delta V r will be 0.1 times 1 k
divided by 1 k plus V t over I d q or simply I can as well evaluate the value of V t over I d q
and replace, right? So, what is V t over V t over I d q? So, this value is. So, let me go to the
next page. So, R d is V t over I d q which is 25 millivolt divided by what was I d q? It was
0.3 milliamps. So, this is approximately, right? 8 ohms, 8.33 ohms. So, let us say it is 8 ohms,
correct? So, which means what is delta V r? So, now my delta V r is nothing but 0.1 times 1 k
by 1008 ohms, 1 kilo ohms or simply replace it by 1000 ohms, correct? So, whatever that value
might be this is that value, ok? So, what is the total voltage? The total voltage across R is equal
to quiescent, right? So, V r q that is the quiescent plus delta V r. What was V r q? It was
0.3 volt and what is delta V r? This is this 0.1 times 1000 by 1, right? So, this will be your
total voltage across the resistor. Similarly, you can also find the total current,
the total current through this loop. So, increment what will be the incremental current through this
loop? This incremental current that is delta I r is 0.1 volt by R d plus R which is 0.1 by 1008,
right? Amps and you already knew, knew the original current, original I, right? So,
you simply add up this delta I r, quiescent I. So, your total I, total I will be I r q plus delta,
ok? Ok.
