Day 5 electrochemistry
Oct 14, 2023
0:00 clickers and review of youtube lectures
4:01 Entropy vs Enthalpy review
5:55 calculating delta G for a reaction from free energy of formation values with example
7:01 enthalpy, delta G, spontaneous
13:10 theoretical vs experimental free energy components with example
20:40 electrochemistry introduction
23:00 penny battery demo
26:30 standard reduction potentials
31:17 overall cell potential
36:40 converting between voltage and free energy
39:58 worked electrochemistry example with different # of electrons
Okay, get your answers in.
This is the reaction.
This is sweat evaporating, that reaction.
Okay, I'm going to end it.
Okay, wrapping this one up.
Here we go.
Sweat evaporating is definitely endothermic.
Okay, next question.
The last reading quiz question is, will this reaction occur spontaneously as it's written?
You're given the balanced chemical reaction, and you're given the delta G for that reaction.
Can I zoom in?
Sure.
Okay, we're going to end this one, answers in, A or B. Wrapping up, okay.
Will this occur?
The delta G is less than zero, therefore it's negative, so yes, it proceeds, right?
So if you're having any questions at all on these, these ones were things that definitely
should have gotten from class.
Because there's not a good reading in the book on thermo, these came from the previous
lectures.
In general, these will be coming from future things that you'll be expected to read.
Our TA, Danny, will be posting those between Friday night and Saturday night for the coming
week, right?
So for the week that's coming up, watch for her to post what things you should read, and
these are not meant to be difficult at all, these are just meant to be encouragement to
read the chapter.
If you've read the chapter, these should be really easy.
Paul, any questions?
No, but I will record the lectures, and you can always catch them, they'll always be the
first five minutes of class, so you can see them that way.
And I've assigned it, and hopefully it'll do it on all of them, you see the little green
check here?
That should indicate what the right answer was.
Oftentimes, it'll be what most people select, not always.
Yeah, Nick?
Can you post the previous lectures then?
The videos?
Yeah, all of those are available.
If you haven't seen, I made an announcement, there's a YouTube playlist, so it'll just
automatically play all the lectures.
I've got the first, I think, four days of class, plus two bonus lectures where I talk
to the MSC 2010 students about how to write nice lab reports.
That's all available, and let me actually pull it up to show that we've gone through
some work on this.
So if you go to the course website, there's a link, otherwise, let me just pull it up
real quick.
So on the course website, there's this Excel spreadsheet where I've got the date of class,
I have the chapter, the material that we covered, and then I have a really well-broken
down list of the topics covered and a link to the YouTube video.
So if you go to this thing, grab this whole video, come over here to the YouTube machine,
it's actually hyperlinked, so if you don't want to watch the whole hour-long video, for
example, blah, blah, blah, you can scroll down here and click the exact section to go
to what was covered.
We've actually done more detail on this, we have it broken down almost every five minutes,
so we're trying to make it as easy as possible for you to review stuff that was covered in
class, and this is the easiest way I know how to do it.
If you have suggestions, I'd love to hear them, but why don't you send me an email,
I'll come by my office to do so.
Okay, let's move on then.
Today, I finished up this activity of predicting whether or not a reaction will go forward.
We did the first two in class last time, so I went ahead and I finished it, and the key
point is that when both enthalpy and entropy both predict that a reaction goes forward
or backwards, it's really easy to predict, right?
If enthalpy is negative and entropy is positive, it's definitely going to happen.
If enthalpy is positive and entropy is negative, it's definitely not going to happen, but then
when you have competing results, it depends.
The answer is, well, it depends, and oftentimes it's temperature, right?
Consider this one.
Enthalpy, change in enthalpy is positive.
That's bad, right?
That's endothermic.
However, the entropy is increasing, so here's one that's competing.
Which one's going to drive it?
The answer is, it depends.
So you've got a positive term minus a positive number.
Temperature's always going to be positive, multiplied by a positive number.
So this is going to be positive minus a positive number.
So if temperature is large, then that will actually cross over and become negative.
If it becomes negative, it becomes spontaneous.
Free energy goes down, right?
So in that case, that type of reaction goes forward at high temperatures, but not at low
temperatures.
And then the reverse, let's say something that's exothermic, but it becomes more ordered,
that's something that will become favorable at low temperatures, but not high temperatures.
You'll see an example of that on the homework two, which will be posted tonight.
Okay?
Yeah, question?
What is spontaneous?
Spontaneous means it will happen automatically, that you don't have to drive it.
Today, we're going to talk about electrochemistry, where you can drive a reaction forward that's
not happening automatically.
When we say drive, that can be electrically.
You hook up leads to it and put a battery to it and make it happen.
But spontaneous means it happens on its own, that there's an energetic argument for it
wants to happen.
An example of this is diamond, right?
Your diamond ring, from an energy standpoint, the diamond in your diamond ring wants to
turn into carbon.
Did you know that?
Diamond, if you put it in a fire, it'll actually, I don't know how hot it has to be, but it
would actually eventually get enough energy that it would burn and turn into carbon, right?
If there's oxygen present, it'll just burn, right?
But if there's no oxygen present, it'll convert to graphite, right?
That's because from an energy standpoint, it steps down in energy, so it wants to happen.
That doesn't mean it's going to happen though, right?
Later this semester, we've covered thermo so far, later this semester, we're going to
cover kinetics.
Kinetics dictate the rate at which things happen.
Sometimes kinetics means it never happens, right?
Like your diamond on your ring turning into graphite, kinetically, that is an extremely
impossible process, right?
So it doesn't happen unless you heat it up by throwing it in a fire or something.
Yeah, other questions?
Do you think it's already, is it spontaneous?
There's more I can say about this.
Let me introduce the idea of equilibrium and maybe that will explain your answer to this
because if it's happening, then it was spontaneous.
But will it keep on happening just all the way or will it stop at some point?
That has to do with equilibrium and let's talk about that right now.
Okay.
If you guys remember two class periods ago, we talked about tabulating the change in entropy
or the change in enthalpy for a reaction.
If you know what the individual components were, right?
You did the sum of the products minus the sum of the reactants and it wasn't so bad.
Well, you can do the same thing with Delta G and we're going to do that for our next
clicker question.
The clicker question, that's big, make that smaller, is as follows.
Here's your equation.
You've got NaHCO3, that's a solid, turning into NaOH, which will be a solid, plus CO2
gas, right?
So it's decomposing to form CO2 gas.
So what I want you to do is calculate the Delta G naught R, right?
So Delta G R, that means the change in free energy for the reaction, and then naught means
under standard conditions, meaning that you're using these free energies of formation, Delta
G naught F. Okay, you're going to assign that, you're going to do products minus reactions
just like before.
Here's your three values for the three things in the equation, CO2, NaOH, and NaHCO3.
So we're going to plug this in and figure out whether the answer is A or B. Is it a
positive free energy change or a negative free energy change?
We'll do two minutes on this.
You have questions?
So in the same order, they appear in the equation, right?
The last one is CO2, second one is NaOH, first one is the sodium carbonate.
If you have questions, raise your hands, we have TAs, I can help too, if you're stuck.
Okay, 20-ish seconds left.
Okay, we're going to stop this one.
So answer's in, A or B. Maybe you can always ask a friend if you're panicking or if your
calculator died.
Rose, I'm going to end this and we'll answer your question.
Okay, people think A or B.
I don't know why this is so slow.
Most people think positive.
Is it positive or negative?
What did I get?
Oh, it is positive.
It's positive.
Now, how do we do this?
Let's just write it out really quickly.
Delta G, again, the change in the free energy, so delta means change, G is our energy, R
means for the reaction, and then zero, the little zero up here, means under standard
conditions, meaning that we use these delta G naught of formation values.
Again, we do products minus the sum of the products minus the sum of the reactants, coming
out to 77.2 kilojoules per mole.
Now, because that's positive, leads to our next question.
It is a positive delta G, so is this spontaneous or not?
So answer's in, answer's in.
Just do one minute on this.
Okay, anybody need more time?
I'm gonna go ahead and end this one.
Okay, and because it is a positive change in free energy, that means it went up in energy
as this expression is written.
Therefore, that will not be spontaneous.
What does it actually mean then?
That it'll go the other way.
That if you have NaOH and CO2, and you put those in a beaker, at least under, from a
thermodynamic standpoint, ignoring kinetics for a moment, those things should react to
form this NaHCO3, right, spontaneously.
Okay, any questions on this?
That straightforward?
Yeah, Rosa.
Ah, great question.
So where did solids and liquids versus gases come in?
That was when we were talking about the reaction quotient.
So the reaction quotient is this Q.
We're gonna come back to that just right now.
And that's where you do the products over reactants.
And if it's a gas, then you use the partial pressure of that gas.
And if it's a solid or a liquid, then you just put one, meaning you can just leave it off.
Right?
Now, what is Q?
Remember, our total change in free energy for reaction had two parts.
And this is something I'm gonna mention ad nauseum.
You'll hear me say it so many times.
The change in free energy can't just be calculated from the equation as it's written on paper.
Right?
This one, as we saw up here, that's how it's written on paper.
And we all decided that on paper, when we calculated it from the delta G naught Fs,
that's the free energies of formation, that's what the F is, under standard state conditions,
that this looks like this won't happen.
Right?
So that's the theoretical part of the equation, right?
So in this equation here, that's this blue part, right?
That's the theoretical part, delta RG naught.
But it's not only a theoretical part, you have the experimental part,
which basically is a measure of, well, what's inside the reaction chamber?
If you have no CO2 to start, even though CO2 wants to combine with NaOH to form the other thing,
it can't go forward.
Right?
So there's this experimental and theoretical component you have to consider.
And that's where the solid-liquid-gas thing came in.
So let's do an example of that.
We'll do, I think, one more example here.
Okay, how about this?
Same expression.
Again, we had the experimental portion, theoretical portion.
Same time now.
We're going to take the same reaction, the NaH, CO3, reacting to form NaOH and CO2.
This time, we put it in a chamber that has, let's say, pure CO2 gas in the chamber.
Right?
So you've got your lump of NaOH at the bottom, and the rest is CO2.
So we know that this reaction, it should start reacting.
The other question is, the reaction will reach equilibrium when delta Rg equals zero.
That's not delta Rg naught.
That's, just to clarify, to draw a distinction here, we're talking about this one.
When that delta Rg, when the change in free energy for the reaction equals zero,
it won't be going forward or backwards.
Technically, it's going forward at the same rate that it's going backwards.
Right?
There's no change in products.
It's going to reach equilibrium.
The question is, when that occurs, what will be the final partial pressure of CO2?
Let me help you get this one set up.
We know that delta Rg equals delta Rg naught plus Rt natural log of Q.
R is the gas constant.
That's 8.314 joules per mole Kelvin.
Temperature just needs to be in Kelvin.
Let me just write Kelvin.
Put the temperature there in Kelvin.
Q is our reaction quotient.
Somebody remind me, how would we write the reaction quotient for this reaction?
It's products over reactants.
In this case, we have two solids.
The first solid reacts to form another solid plus a gas.
So what do we have to write here?
It's going to be the partial pressure of CO2.
Times one, divided by one, so you just leave this off, basically.
Q just equals the partial pressure of CO2.
Initially, the partial pressure of CO2 is just one.
But we're not asking that.
We're saying, at equilibrium, what will the partial pressure of CO2 be?
Some of that CO2 is going to get consumed to react with the NaOH to form the NaHCO3.
We want to find out what will be the gas pressure in this thing when it's done reacting,
and it's reached its happy place, and it's at zero.
So all you have to do to solve this question is assign this left-hand side of the equation to be zero.
Equals delta RG0, which we calculated previously.
We said that it's a positive 77,200 joules per mole.
That was what we calculated for our change in free energy.
We're going to do plus 8.314 joules per mole Kelvin.
Multiplied by 298 K, multiplied by natural log of Q.
And you just have to solve for Q.
So go ahead and do that. It'll take a couple minutes.
That's our next figure question.
I'm going to move that kind of out of the way so you can see it.
We're solving for the partial pressure.
We know that Q, in this case, equals the partial pressure of CO2.
That's not always the case. Sometimes it can be something else.
In this equation, Q equals the partial pressure of CO2.
Because our reaction quotient only has one term in it.
Okay, get your answers in. One more minute.
Make sure you're using the temperature of room temperature, 298 K.
Okay, we're going to end this one. Get your final answers in.
Phone a friend if you need to.
Okay, I'm wrapping it up.
People think, what, is it A or B?
Okay, it is A. That's right.
Okay, so again, all you had to do was just bring one of these terms to the other side,
divide it, take E to that side to get Q on its own,
and you'll find that Q is equal to the 10 to the negative 14 number.
Okay? If you're not getting the right answer on these,
you can feel free to stop by one of the TAs. We can work through them in detail.
Rosa, can I answer a question?
Great question. What are the units of Q?
So Q, we're going to use partial pressures for gases.
And up here I wrote what that is.
Partial pressure. Pressure should be in bars,
or ATM is fine in this class, so atmospheres.
So if you have one atmosphere of CO2 in there, then you just put in just one.
So don't convert it to tors or anything like that.
We want atmospheres.
Okay.
So that's all the thermodynamic stuff that we're going to cover.
Now we're going to switch gears and talk about electrochemistry.
And at first these things might seem very, very different to one another,
electrochemistry and corrosion and thermodynamics.
They're actually remarkably, remarkably similar.
I'm going to show you what I mean.
There's one correction, an equation in the book is wrong.
So take note of that.
That's equation 16.17.
It should be this.
I think they've got one of these subscripts wrong.
I think that's one of the only corrections you have to do on the book the whole semester.
Okay.
Electrochemistry.
That has to do with, just like thermodynamics,
many of those reactions have to do with the oxidation and reduction,
meaning that there's a species that loses an electron,
one that picks one up.
Electrochemistry has that happen as well.
And this is basically what happens.
You put it in a beaker with some zinc 2 plus ions in solution.
You can take a little reference electrode here,
it's platinum basically,
that has hydrogen atoms here,
hydrogen ions I should say, in solution.
And if you connect this thing electrically,
I mean you connect a wire to these two things,
you will find the following.
The metal, the zinc metal actually gets dissolved.
Right?
It starts to actually disappear.
And you get hydrogen ions going from ions
to bubbling into gas to form H2 gas.
And you'll see gas coming out of this thing.
It happens totally on its own, spontaneously.
So what's happening?
The zinc is going from zinc metal to zinc 2 plus ions.
Right?
You've got zinc turning into zinc 2 plus
by surrendering two electrons.
Right?
It gives up electrons.
Is that oxidation or reduction?
Remember, oil, rig, it lost electrons.
So it's oxidized.
Right?
So this is your oxidation reaction.
Meanwhile, you had H plus ions that were in solution,
let's say from an acid, picking up an electron
to form
half of an H2 molecule.
Right?
So spontaneously this is happening.
Right?
This setup is important because this is what's called,
this is how we measure standard reduction potential.
They always on the right hand side,
they always use this hydrogen ion producing
hydrogen gas with like this little platinum
catalyst material.
And on the left hand side they put different materials.
And what they do is they measure the voltage
that accompanies this. Right?
We know that electrons have to be traveling across that little wire
along the top. So you put a little meter up there
and you measure the voltage.
And what's interesting is that we can do this ourselves. Right?
So I had the TAs who are awesome put this together
for us. I'm going to switch to camera real quick.
There we are.
So let me move this so you can
see it.
Okay, we've got a voltmeter here. We're going to read a voltage.
And then I've got these stacks of
coins. I've got two things. I've got a stack
of zinc and steel
washers on the right.
And on the left I have a stack of pennies.
But the pennies we've taken, we've
sanded one side of them. What's a penny made out of? Anybody
know? Is it pure copper?
The outside is pure copper.
Actually, it's not even pure there. It's mostly copper.
And the inside is what? Zinc.
So what we've done is we've sanded off
one side
of these. Right? So that the zinc
is showing on one side and the copper is showing on the other.
And then we stack these things up.
Zinc, copper, zinc, copper, zinc, copper. And let's take a look
at what we find. When I grab this, I'm going to pick
this stack up and move it on top
of this aluminum foil.
Oh gosh, Emily, I'm ruining your experiment.
It's exactly what that is.
We're going to describe it in just a moment.
It's exactly what it is. If I take this, hopefully
I didn't ruin it just then.
This is tricky. Alright, can you see?
Alright, there's our meter
there. This is less than ideal. Let me
prop this up.
Okay, you can see a voltage
there. So I'm going to put
one of these leads on the bottom
and one of these leads on the top
of our stack and we read, hopefully, the voltage.
It's jumping all over the place, but it's around
three volts. Right?
Just by stacking up, I don't know how many they've done. They've done like
eight stacks of things. Is this the yellow one?
This is yellow, right? Now if we take
an LED,
we're going to have to turn off the lights to see this.
If we take this LED
and I put the short end
on the foil and the other end on top
of it, hopefully you can see this.
This should
maybe. Oh, see that?
We're actually lighting
an LED with a tiny homemade
battery. Right? So let's do one more here.
We've got, now on the other stack, that was
zinc washers
and steel washers that we
stacked together. Zinc and
steel. I'm not ruining this.
I'm going to stack it up.
We could measure a voltage on this just like before.
Oh gosh, I think I messed this one up.
We'll see if it works. If it's
shorting out, it won't work. I might have just done that.
I'm going to try and do the
same thing here. Lift up
the foil and
touch the two ends.
Maybe. I think I'm
shorting. I'm going to skip that one.
So, what have we done there?
How on earth is that producing enough
electricity to light up a tiny LED?
It's not great, but it's lighting up.
What's happening? For this
LED to light up, what does it have to have?
It has to have a current
running through it. When I connect
it to the bottom of the stack and then touch it to the top
of the stack, there must be a voltage
inside of there that's driving a current through the LED.
A white LED takes five
volts. A yellow one takes a couple of volts, maybe two.
Different voltages.
Why is it when we stack these different
metals together that we get a voltage? Let's talk
about it.
It has to do with
the different metals have different what's called
reduction potentials, meaning
how easily they
in this case, pick up electrons, add
electrons from an ionic state.
What's interesting is that
if you take, say, iron and copper
and you connect them in beakers like this,
if it's iron and copper, the iron
will get dissolved, meaning it's oxidized,
and the copper will precipitate
out from the solution and precipitate onto
that rod. But if you take iron and
zinc, now zinc will get
dissolved and iron will get precipitated.
It's not like one metal is always the one that's
going to get dissolved. It depends
on what the other metal is that it's in contact
with. Here's how we know
if we wanted to predict which one's getting dissolved
and which one's not going to be dissolved, we can
predict it. We do it as
follows. We use our standard
reduction potential. This is just a picture
I took from the table in your book.
What this is, it's a bunch of different
metals on the left-hand side
in their ion state, meaning
they're something plus three, plus two, plus one.
They're as an ion that's lost
an electron. You're going to add the
electron to them to form the
regular metal. What it reports
is the voltage associated
with that. Positive
voltage
equals
spontaneous.
I know that we just got done
doing thermodynamics where a negative free
energy was spontaneous. I didn't make
the rules. I don't know why they chose positive.
But a positive voltage is
spontaneous.
Down here, these ones, because
they're negative voltages, those won't
be spontaneous. We generally call these things
more reactive.
For example, gold.
Gold ions picking
up three electrons to form gold metal
has a very high positive
voltage, meaning it's very favorable
and spontaneous. You want that
because if you're going to wear a wedding ring,
you don't want it to corrode and look gross
if it's made of gold. You want it to always look
shiny. Noble metals,
gold, silver, some of these other ones,
they have very high reduction
potentials, meaning they very much
thermodynamically want to be
picking up electrons to form their regular
metal. Whereas other things,
say sodium
metal, because this is a negative
voltage, you could write the reverse reaction.
Sodium metal turning into sodium
ions plus electrons, that is very
spontaneous. If you've ever taken
or seen on YouTube them take a block
of sodium and throw it in a lake,
it's extremely
favorable. It actually explodes.
It wants to get rid of its electrons so badly that it's
a pretty violent reaction.
These tables are actually pretty useful.
How does this table help us answer
the question of whether iron and copper,
which one gets dissolved and
plated versus iron and zinc?
Let's do an example. Let's write it out. Let's do
iron and zinc.
Let's write out
first both equations. We're going to say iron
two plus
picking up two electrons
forms iron metal.
Meanwhile,
zinc two plus
can pick up two electrons
to form zinc metal.
We can look up what the voltages are
for both of these reactions. For iron,
the reaction is right here.
Iron two plus
two electrons forms iron. That
has a negative 0.44.
The V-naught
equals negative 0.44
volts.
Meanwhile, zinc is down here.
It is zinc two plus plus two
electrons gives zinc. That is negative
0.763
volts.
What happens is that
these are both currently written as
reduction potentials, but we know
that every redox reaction
and electrochemistry is redox reactions
has to have both an oxidation and a
reduction. What we're going to have to do, since
we have two reduction reactions, we're going to have to flip one
of them. Instead of picking up electrons,
it's losing them. One has to be
oxidized. How do you know
which one's oxidized? The one
that is less stable, which is the more
negative one. The compound
with the most negative voltage is
oxidized. That's one that we're going to
flip. We're going to take this
equation, we're going to get
rid of it, and we're going to rewrite
it as an oxidation.
It's now going to be zinc metal
reacting to form zinc ions
plus two electrons.
The voltage
gets flipped. It used to be negative
.763, it is now
going to be positive .763
volts.
Now when you add these
two equations together, the two
electrons would cancel on both sides, and
we could write a combined reaction
which would look like the following.
It would be iron, two plus
ions that are in solution,
plus zinc metal
will react to form zinc
two plus ions in solution
plus iron metal.
In this case, this basically
says exactly what the observation is.
If you put zinc and iron both in
little beakers, you connect them
electrically, you'll find that zinc
dissolves, it goes from metal to ions,
whereas iron precipitates.
The iron ions from solution precipitate
out onto the piece of iron.
The reason for this is because
now that you have these two reactions,
you can combine their voltages.
Positive .763
plus negative .44
gives us an overall
positive voltage of 0.323
volts.
We said positive voltages,
that's just the same as having a negative
delta G. It's favorable.
This reaction as written is favorable.
Are there any questions so far
on using these tables?
Great question.
In order to have,
imagine this scenario up here for a minute.
If we connect these two things together
with a little wire,
we know that electrons are going to do what?
We could look at our diagram.
We're going to have zinc giving up
its electrons to form zinc
two plus ions. Over here,
your, I don't know which
one's which.
This is a different reaction. This is the one that's
dissolving. The one that's dissolving,
the electrons are traveling that way.
If electrons travel that way,
eventually you're going to build up a charge.
You're going to have
a positive charge.
I drew that backwards.
You're going to have an electric field.
You have delta positive here,
delta negative here, which will eventually
cause your species, all your
electrons that are coming there will experience their own
electric field and it'll stop moving.
If you don't connect these things with a salt
bridge, this thing that connects the two beakers
over, your
corrosion can't occur. What does the salt
bridge do? It provides a means
where salt ions, something like sodium,
can travel in that
direction as well. For every one electron
that's traveling that way, you have
a salt ion, some sort of
sodium cation also traveling that way
so that there's no buildup of an electric field.
If an electric field builds up, it would
stop.
First I had it here, then here.
For example, in here, in these
stacks of coins, what Emily did for us,
she took the pennies and in between
the layers of pennies, she put a piece of
filter paper that was dipped in
salt water. If you don't do that,
this will not light up, you will not create a battery.
Inside every battery, you have to have
anode and cathode, that's where the
oxidation-reduction reactions take place,
and then you have to have an electrolyte, which is just
something that has salt ions, some sort of
charged ion that can move.
Because otherwise, if those ions can't move,
it will just cancel out. It'll build
up its own electric field that will resist further
electron movement. Griffin?
So, on electrolysis, sometimes
people add in salts to speed up
the process. Is this for the same reason, or
is it not? I better not say. I don't know
offhand. I could look into it. I don't know for sure.
Brennan?
If the two
are possible for there to be anode and stuff?
Sure. Sure.
In fact, if you look at these,
because one's precipitating
and one is dissolving,
very quickly, actually, you can look at one of these.
Let me pull up the camera real quick. So this was
a nice, shiny steel washer moments ago.
Oh, oops. Oh my gosh.
Typing camera there.
This was a nice, shiny steel washer
and now it is... I don't know if you can
see that. It's pretty dark. It's got lots
of black corrosion. It looks terrible.
It's black and corroded.
Right? Okay.
Let's move on.
So, does this make sense? I could give you any
combination. I could say you take a piece
of nickel and a piece of
silver. You put together one of these
what's called galvanic cells
and you could tell me which one should corrode and which one
will be plating onto it.
Right? Which one will dissolve? Which one will have things
plating onto it? Question in the back?
Great question. These ones, we literally
just pushed them in contact with one another.
But you could do lots of other things. We'll actually talk
about an example. If anybody heard of the word
sacrificial anode before?
If you have a water heater in your house, you have a
sacrificial anode.
So we'll come back to that. Okay?
Okay, so you know how to
calculate this delta V
when you combine these together. This is now called
the delta V-naught. We call
that the overall cell potential.
To calculate this delta V-naught
right here, all you have to do
is add together your reduction
and your oxidation half cell
reaction potentials.
Again, you have to flip one of them
because you can't add two reduction
potentials together. That's not a redox reaction.
You have to flip one of your reduction reaction
potentials so that it's an oxidation
potential. And then you can add them
up. Okay?
However,
this is completely analogous to delta
G-naught. Remember, delta
G-naught, that was the theoretical
part of whether a reaction takes place.
But there's theory and there's experiment.
And electrochemistry is the exact same.
In fact, you can go from
delta V-naught to delta G-naught
with this equation. If you wanted to calculate
delta G-naught for a reaction,
say this reaction right here,
we could calculate delta G-naught
for that reaction with this equation.
The equation says
that delta G-naught equals negative
N, N is the number
of electrons transferred, times F,
the Faraday constant,
times delta V-naught. So our
delta V-naught is 0.323
volts, right? So
if we were to calculate this, we'd say
that there's two electrons involved,
negative 2 times
96,500
coulombs per mole,
multiplied
by 0.323
volts. And if you do
a coulomb times a volt, I'm pretty sure that that's
a joule. I'm almost positive it is.
So this would come out in the units of energy, right?
So pretty straightforward.
This is why we teach these two things hand-in-hand, because
they're totally analogous. And just like this
is the theoretical part, but you need both the theory
and experiment, we need to address
the experiment part. So how do we do that?
Well, what that's basically saying is how
will temperature and the concentration
of your ions in solution change the
outcome, right?
Just like the experimental conditions
of whatever reaction can change
its outcome, the same happens here. So this is
what we actually have to work with. The full
equation is right here.
It has the experimental
component, right there,
and it has the theory
component, right
there. We just calculated
theory from our table. That's the one where you take the
two, add them together, make sure
the electrons cancel out,
and you get what's called
overall cell potential, delta
V naught. However, you also
need to include the stuff over here. You have R
and T, just like from before, gas constant
times temperature, divided by N
and F, the number of electrons involved in the
transfer. That needs to be balanced, by the way. We'll do
an example where it's not balanced, where we have to balance it ourselves.
And F, Faraday's constant.
And then here, you do a natural log
of, before it was Q.
So what do we have here? This is still
Q. Q is still
products over reactants.
Right? So what we have
here, we have a solid.
So that just gets a value of
one, meaning we can ignore it. We have a solid,
meaning we can ignore it. And now we have
two ionic species. If you have
species that are ions, even
though they're in a liquid, we have to account for
them. And the way that we do it, we don't use partial pressures,
we use concentrations. So we figure out
what's the concentration of that ion
in the solution. And then it's
products over reactants. So our product is
zinc 2+, our reactant is iron
2+. And if you look down here,
it's going to be,
your product will always be your oxidized
species. So the concentration
of whatever your oxidized species
is, divided by
the concentration of whatever
your reduced species is.
We're going to do an example of this.
How about this? What if one of your reactions
has one electron transfer, but
another one has two? So let's
do this for
silver. Silver ions,
Ag+,
picking up one electron
to form silver metal.
That has a voltage
associated with it.
Is this going to be positive or negative? What do we know about silver?
Does it want to corrode?
It's going to be a very positive number, because silver
is one of our noble metals. It doesn't want to corrode.
Its value is 0.8 volts.
Positive 0.8 volts.
Meanwhile, let's do it with cadmium.
Cadmium 2+,
adds
two electrons
to form cadmium metal.
This has a cell potential
of reduction, potential
of negative 0.403 volts.
Therefore,
one of these has to be switched.
We have to cross it out and rewrite it
as an oxidation reaction.
Which one is it going to be?
It's definitely cadmium. How do we know that?
It's the more negative one.
Remember, in voltages, positive is
spontaneous. So this we're going to get rid of.
And we're going to rewrite it as
cadmium metal reacts to form
cadmium ions,
2+, plus two electrons.
That means that the
voltage turns into
positive 0.403
volts. Now, we could go ahead
and add these two together now. And when we add
them together, do our electrons cancel out?
They do not. So we have
to multiply that top equation by
two. We would say
we're going to multiply this whole thing
by two. Therefore, our final
reaction will be as follows. Two
silver plus ions,
plus two electrons,
plus cadmium,
yields cadmium 2+,
plus two electrons,
plus two silver ions,
plus two silver metal, excuse me.
The electrons cancel out.
Right? The only
catch here, and this is important, so you want to
write this down.
We'll always make mistakes on this.
You do not multiply
the voltage here. Do
not multiply
by two.
Leave alone.
When we did free energy,
remember with entropy and enthalpy, we
multiplied that term by it. We
do not do that here. And the easiest
way I think I can explain that is,
when you think of electrical current,
voltage is sort of like, if electrical
current is analogous to like the flow of
water in a river, right, instead
of flowing electrons, imagine you have flowing water,
a voltage drop is like a little waterfall.
Right? So we're not changing
the height of the waterfall when we
add more electrons. We're just sending
more water off the waterfall. We're not
changing the height of it. That's really
kind of the best way I know to describe this.
So, if you have to just write it down to remember
it, then do so, but you do not multiply
the reduction potential. It
stays constant. Right? You
do multiply the equation when you add
it together. Yeah, Griffin?
Oh yeah. Yeah. There's still for every
you need two moles of
Ag plus for every
one mole of cadmium metal.
Yeah, you still consume more.
Exactly.
So therefore, we could
calculate the overall cell potential,
right? The delta V naught
is going to now be equal to the V of the
oxidation plus
V of reduction, right?
In that case, it's going to be 0.403 plus
0.8. So that's what? 1.203?
So that's
1.203
volts. Okay, we're almost done.
That's delta V naught.
We'll end after we do this. But
we know that the voltage that this
voltmeter is going to read, it doesn't
just depend on theory. It's the theory
and the experiment. So what you read
on the voltmeter will be this value. It will be
what are we calling it?
Make sure I'm right on terminology. We call it just
delta V. So
delta V, not delta V naught,
delta V equals delta V
naught, which we just solved for.
And now we have to do minus
with delta G. For free energy,
we did plus RT. But remember, because
this pesky negative that somebody
thought it was a good idea to include,
we have to now minus this term.
So it's going to be minus
RT over
NF natural
log of the concentration
of our oxidized
species. Again, it's products over reactants, right?
Sorry, that's 2 plus.
That's an ion. So it's going to be the concentration
of our cadmium 2 plus
divided by the concentration
of our silver
plus. And then there's one last catch
before we're done. This needs to
be squared. Remember from our
reaction quotients, if we go way back up here
to reaction quotients, you
took, right here, the partial pressure
was raised to the
coefficient in front of it, right?
There was n sub y
moles of y. So we got raised
to that n y. If you look down here in the
equation that we just did,
there is 2 in front
of our
silver ions. Therefore, the concentration
of our silver ion, that needs to be
squared. If there was 3 in front of
it, you'd have to raise it to the 3 power.
Okay? So if I told you, and we'll
probably start with this next time, if I told you
the concentration of cadmium ions
and silver ions, now you
can finally calculate the voltage which would appear
on your multimeter. Okay, we'll
pick up here next time.

