Level Up Craft Show Sales: Boosting Laser Engraved Personalized Products with xTool X Jackery! F1

How do you make your laser-engraved products sell better at craft shows? What is up a welcome back do it to do ability to make it and sell it So do we and we have new videos each week every Tuesday and Friday We've noticed that craft shows products that evoke emotional response sell the best Yes, things like things with your sports teams logos on them hobbies family your local town and number one Personalization, do you do personalization? What kind of personalization do you do? How do you do it? Leave me a comment down below Personalization is pretty hard at craft shows unless you're really good at that hand lettering But we're laser crafts and so here lettering really doesn't go with our theme, but we think we found the perfect solution to Laser engrave your products right on site at the craft show and we're gonna do a giveaway We have a premium pack here of 54 laser engraveable items get you started Step one a design time Christmas ornaments are hot because it's getting cold outside It is that holiday craft show season time and I know I wanted to bring The f1 to the craft shows with us to do some on-site personalization so we're gonna make because Garrett wouldn't let me buy a Design that we could do some personalization on these ornaments so that every kid gets their name on the ornament Grandma can have an ornament for their grandkids Mom and dad can have an ornament with the new baby Kim wanted something very specific. So we need to be able to have multiple stockings Anywhere from one or two stockings all the way up to eight stockings. You might have a lot of kids or a lot of grandkids Step two, we're gonna gather all of our supplies. We're gonna use some five millimeter Baltic birch with an MDF core for the backer and a little top banner then we're gonna use some eighth inch MDF for the stockings the little I don't know stocking puffs. What are those things called? and the Christmas lights Step three time for some prep. We're gonna pre-paint a couple of our boards, right? We have all of these tiny little stocking pieces are gonna come out of one board These are going to be small little pieces that we do not want to have to paint individually after the fact so we're gonna go ahead and Spray paint this board white and spray paint another one red so that we can cut the stockings out of that board step four We're gonna make all of our cuts I'm gonna use the X tool p2 to do all the heavy lifting get all of my cuts out of the way that Pre prep work all that pre prep work. That's why they're a great duo I'm gonna use the big guy to cut all the stuff and do all the the powerhouse type of things and She's gonna come in with all the little delicate details I'm also using the p2 because it's gonna Automatically focus on each of the size boards and then I don't have to guess about the settings either I'm just gonna pick Baltic birch five millimeter and I'm gonna pick Three millimeter MDF step five paint and or stain We're gonna stay in these little five millimeter Baltic birch pieces. Yes by using Baltic birch These are the perfect that's the perfect medium to stain on because it has that nice wood grain or you can paint these as well We definitely are gonna paint our little light strands. There they are Tiny guys tiny tiny little light strands. These Posca markers are perfect for that job You could do this right on site at the craft show if you have to or you can do all this pre prep ahead of time either way Posca markers will save the day and We don't have to paint our little stockings or the little puff pieces at the top because I already painted those We just have to wipe them off Yes, maybe we should have used a little masking here Garrett was Garrett's idea was by using the high gloss spray paint They were easily wipe able and they are you can wipe off most of it but not all of the charring on the edges came off without on site at the craft show without our little Chemicals, I don't know. I don't get a little patina makes it look aged Yeah, it does give it a little antique look makes makes the stockings look a little round it makes it I think it just gives a little more life little dimension a little dimension step six Pre-assemble, we're gonna put some of the pieces together that don't need personalization now before we go to the show Or here you can see we did this right at the craft show It was just as easy to just glue these and stack them together right there on site Minutes, I mean seconds if that yeah seconds step seven On-site laser engrave personalization. We're gonna pack it up and hit the road Xtool partnered with Jackery to provide an on-the-go Power pack laser engrave solution. Our Xtool F1 is the fastest Infrared and diode portable laser engraver on the market. We shared this with you in a previous video This is the world's first portable 10 watt blue laser and 2 watt infrared laser this can cut up to 8 millimeters of wood and 5 millimeters of acrylic and The detail in this engraving is minute. This is crisp clear patterns in every engrave We use this with our Xtool creative space and you can use that on your desktop We brought our laptop with us your iPad You can use it on your phone and there are so many different accessories that come with this. You can use the slide extension We've done that in a previous video the rotary Attachment and it also comes with this air purifier so that you can use it indoors at your craft shows the Jackery Explorer 500 is a portable power station coming in at just 13.32 pounds. It's long-lasting. It'll provide several years of your craft shows Even if you do hundreds of shows a year with a 518 watt capacity It'll easily power your F1 laptop and your air purifier. You can also use this thing while it's charging So if you have your solar panels hooked up, you can continue to use this thing while it's charging itself You have up to five hours of continuous use using the F1 and the air purifier So you should have plenty of time to get a lot of foot traffic coming in to see what's going on at your booth We open creative space on our laptop Connected to the F1 right here at the craft show right at our picnic table All we had to do for these ornaments was type out a name use the default engrave settings We framed it for each stocking. We framed the name first Then we just clicked process start press the button and this is the fastest engrave it took seconds seconds At craft shows. We've noticed the booths that have the most traffic are somebody that's doing a craft on the spot We're doing some sort of presentation about their product Anytime Garrett is sitting there painting a sign or touching up a sign it brings people over They want to see what he's doing the thing about the f1 and having it and personalized engraving right at your craft booth It really brings folks over to see what you're doing and really gets them engaged And if one person is standing there if you've been there at a craft show You know that ten people are standing there and the more foot traffic you have the higher your sales and who doesn't love a laser Light show so you can actually see the laser and everybody's eyes are protected. They don't have to wear the goggles This is another great thing about the f1. It's portable safe laser light show, you know, it'll attract the kids over Step 8 Profit we're all in on materials about 50 to 75 cents depending on how Detailed we painted it and if we actually stain the backer and if you add in that laser time and your paint time You're still under Three to five dollars per ornament easy easy and you can probably sell these for fifteen to twenty dollars Right. We were thinking of marketing these at fifteen dollars as is and then maybe adding a dollar per name dollar per name Yeah, so that way if you have a big family Don't cost you a good chunk of change And a big thanks to all of our hangers That's our patreon family over there if you have a laser craft side hustle and you make laser crafts This is a great community of folks that do the same thing We're always offering up tips tricks advice new project ideas. Come and join us over at patreon.com Kim and Garrett make it and we're having our giveaway. I thought you forgot about the giveaway, right? Just leave us a comment down below leave me a like and be sure to be a subscriber Don't forget to tick that Bell to be notified of our new videos each week and good luck