EST 130 BASICS OF ELECTRONICS ENGINEERING || V-I Chara OF PN JUNCTION DIODES || KTU
Oct 9, 2023
V-I Characteristics of PN Junction Diode
Zener diode or break down diode
Avalanche and Zener breakdown
IDEAL DIODE
Hi All, Welcome to the 9th lecture of Basic Electronics
Today we are going to discuss about the V-I characteristics of PN Junction Diodes
Center Diode or Breakdown Diode
Avalanche and Center Breakdown
Ideal Diode
How an Ideal Diode works
These are the topics we are going to discuss
First, we are going to see the V-I characteristics of a PN Junction Diode
V-I stands for Voltage, V stands for Voltage and I stands for Current
The V-I characteristic is the relation between Voltage and Current
This V-I characteristic explains the operation and working of a PN Junction Diode
This is a relationship graph
The V-I characteristic is the relation between the applied voltage and the current flowing through the diode
There are two ways to connect a diode
One is Forward Bias and the other is Reverse Bias
There are two parts to the V-I characteristics
One is Forward Bias and the other is Reverse Bias
First, let's see the Forward Bias
In Forward Bias, PN Junction should be Forward Biased
That means, the P region of the diode should be connected to the positive of the battery and the N region should be connected to the negative of the battery
Here, P is connected to the positive of the battery and N is connected to the negative of the battery
This is a variable DC power supply
In this, we can adjust the voltage
Now, let's see the Forward Bias
A voltmeter is connected to measure the voltage flowing through the diode
Similarly, an ammeter is connected to measure the current flowing through the diode
Then, we are increasing the voltage from 0 to 0
If we plot the voltage and current correspondingly, the graph will look like this
If you look at this graph, you will understand
The diode is not conducting the current up to a certain voltage
That means, the ammeter reading of the current is not showing anything
When the current reaches a certain voltage, the current increases linearly
Until then, the current increase was non-linear
When the current reaches a certain voltage, the current increases linearly
The point where the current starts increasing linearly is called the knee point
The voltage at this knee point is called the knee voltage
There are other names for this knee voltage
That is called barrier potential or cut-in voltage
When the cut-in voltage reaches a certain value, the diode conducts
Normally, the diode acts like a conductor
The diode conducts only a small amount of current until the cut-in voltage
After the cut-in voltage, the diode acts like a normal conductor
After the knee voltage, the curve is called the linear curve
This is the forward curve of a diode
Now, let us look at the reverse characteristics
How is it calculated in reverse characteristics?
The P region is connected to the negative terminal of the battery
The N region is connected to the positive terminal of the battery
Similarly, the P region of the diode is connected to the negative terminal of the battery
The N region is connected to the positive terminal of the battery
The voltage is increasing as before
The voltage at P is negative voltage
So, the input is negative voltage
The diode conducts only a small amount of current
As we said earlier, when a diode is forward biased,
the current conduction is due to the effect of the majority carrier
When the diode is reverse biased, the current conduction is due to the effect of the minority carrier
There is only a very small amount of minority carrier
That is why the current conduction is very low
The current conduction will be only in the micro-ampere range
To measure the current, we use an ammeter here
To measure the voltage, we use a voltmeter here
When we plot it, it will look like this
The current here is drawn in the third quadrant
Because the voltage here is negative
The x-axis is negative
The current here is also negative
There is only a very small amount of current
So, the current is also negative
That is why we mark it in the third quadrant
Because it is a reverse current, we mark it in the third quadrant
When we plot forward biased, we plot it in the first quadrant
Because the voltage is positive and the current is positive
If we look at this graph, we can see that only a very small amount of current is flowing
After reaching a certain point, the current increases
The voltage remains constant
If we look at this point, the voltage is almost constant
The current is rapidly increasing due to the change in voltage
This is the point where the breakdown occurs
Now, let's go to our theory
In reverse carrier, we can see that the diode current is very low of the order of micro-ampere due to minority carriers
And it is known as reverse saturation current
As we said earlier, the current is flowing in the reverse biased diode due to the effect of minority carriers
There is only a very small amount of current
Its order is micro-ampere range
The name of this current is reverse saturation current
The reverse voltage increases and reaches a point
That point is called the breakdown point
This point is the breakdown point here
After reaching this point, the current inside the diode increases drastically
Voltage at which happens is called breakdown voltage
At this point, the current increases
This point is called the breakdown point
Breakdown voltage is also called the breakdown point
At this point, the semiconductor structure will break a lot of charge carriers become free in this structure
After breakdown, a very small further increase in reverse bias voltage causes a very large increase in reverse current
What happens here is that due to the bond breaking on the semiconductor structure, the reverse voltage increases
Due to the bond breaking, a lot of charge carriers become free
As a part of this, the reverse current conducts itself after the breakdown
There are mainly two types of breakdowns
There is center breakdown and avalanche breakdown
Now let's look at the center breakdown
The center breakdown is usually seen in the center diode
The center diode is a PN junction diode, but it is heavily doped
Heavily doped means the majority carrier concentration is very high
The impurity concentration is very high
Such a diode is called the center diode
When a center diode is in reverse bias, the center breakdown occurs
There are two types of breakdowns in a PN junction
There is a center breakdown and an avalanche breakdown
Usually, when this center breakdown is taken from this center diode, two breakdowns occur
The center breakdown occurs and the avalanche breakdown occurs
The center breakdown usually occurs at a small reverse voltage
At the same time, the avalanche breakdown occurs at a slightly higher reverse voltage
The center breakdown occurs at a voltage less than 5 volts
The center breakdown occurs at 5 to 8 volts
The value of each diode changes depending on the feature
The center diode itself is available in many values
There is a center of 9.1 volts, where the breakdown occurs at 9.1 volts
The avalanche breakdown occurs at a voltage greater than the center breakdown
The avalanche breakdown occurs at a voltage greater than 8 volts
The center diode looks like this
The symbol of the center diode is drawn like this
If you look at the symbol of the center diode, there is an anode
There is a line with a cathode and two more lines with an isode
This is the symbol of the center diode
Now let's see what the center breakdown is
When a reverse voltage of 5 volts or less is applied to the center diode, it causes a very intense electric field to appear across a narrow depletion region
We apply a reverse voltage
The value of this reverse voltage is 5 volts
When a reverse voltage is applied, it creates an intense electric field in the depletion region of the p-n junction
The field intensity of this field is approximately 3 into 10 raised to 5 volts per centimeter
An intense electric field with such a field intensity occurs when a reverse voltage is applied to a center diode
This intense electric field is caused by the breakdown of covalent bonds in the semiconductor produced in the diode
When a covalent bond is broken, there are many free electrons in it
These free electrons are the cause of conduction
The large number of such free electrons will constitute a large reverse current
This is called the center breakdown
This effect is called the center effect
When more current flows through the center diode, it causes the center diode to heat up
When it heats up, it causes damage
To protect the center diode from such damage, we can connect a series of resistors and limit the current
When a reverse voltage is applied, it creates an intense electric field in the depletion region of the p-n junction
When a covalent bond is broken, it causes damage
To protect the center diode from such damage, we can connect a series of resistors and limit the current
When a covalent bond is broken, it causes damage
To protect the center diode from such damage, we can connect a series of resistors and limit the current
Next is the avalanche breakdown
Avalanche breakdown is observed in center diodes having breakdown voltage greater than the reverse voltage of 8V
Avalanche breakdown occurs when a large voltage is applied above 8V
Remember that the center breakdown and avalanche breakdown occur in reverse bias
Minority charge carriers are responsible for reverse current
If the reverse voltage increases, a high electric field produces across the center diode, which accelerates minority charge carriers
As the speed of minority charge carriers increases, the kinetic energy of minority charge carriers increases
Minority charge carriers accelerate. If the minority charge carrier is a hole, the hole accelerates to the negative terminal of the battery
If it is an electron, the electron accelerates to the positive terminal of the battery
If it is a minority carrier, the P-regional minority carrier is electrons
N-regional minority carriers are holes
The holes in the N-region of the battery are attracted to the P-region of the battery
In the same way, the minority carriers move very fast
The reason why the minority carriers move so fast is because
The minority carriers bombard an electron hole pair and can break the covalent bond and release free electron and hole
The minority carriers bombard the electron hole pair and can break the covalent bond and release free electron and hole
This is a chain of cumulative reaction
It will keep hitting and hitting
If the electron or hole in the minority carrier hit an electron hole pair, an electron hole will be created there
It will hit the electron hole pair and break the bond
The bombardment will continue
The name of this cumulative phenomenon is impact ionization.
It is caused by high reverse current.
This is what we call avalanche breakdown.
Avalanche breakdown occurs at a slightly higher reverse voltage.
The kinetic energy of a minority carrier is accelerated.
The kinetic energy of a minority carrier in a high electric field is increased.
It is bombarded in the form of an electron hole.
The covalent bond is broken.
The free electron hole is caused.
The free electron hole is bombarded in the next one.
This is how the process goes.
This is what we call avalanche breakdown.
This is a cumulative phenomenon.
The name of this phenomenon is impact ionization.
This is what we call avalanche breakdown.
This is what we call impact ionization.
This is what we call avalanche breakdown.
This is how the process goes.
Forward oblique bias and reverse apiece biasmic vector MIQ
This is what we call avalanche breakdown.
This is the V-I chara of a p-n junction diode.
Now let's see the comparison between Senner breakdown and Avalanche breakdown.
First Senner breakdown.
Breaking of covalent bond is due to the intense electric field across the depletion region.
Covalent bond breakdown is due to large number of free electrons.
Covalent bond breakdown is due to collision between adjacent atoms.
Senner breakdown is due to low reverse voltage less than 6V.
Avalanche breakdown is due to high reverse voltage greater than 6V.
Temperature coefficient in Senner breakdown is negative temperature coefficient.
Positive temperature coefficient in Avalanche breakdown.
Negative temperature coefficient in Avalanche breakdown.
Breakdown voltage decreases as junction temperature increases.
Breakdown voltage increases as junction temperature increases.
V-I chara is not as sharp as Senner breakdown.
Highly doped diodes in Senner breakdown.
Lightly doped diodes in Avalanche breakdown.
Ideal diode in Avalanche breakdown.
Normal diode in Avalanche breakdown.
Perfect Solid diode.
Ideal Diode in Avalanche breakdown.
Ideal diode in Avalanche breakdown.
Perfect Solid diode.
Ideal diode in Avalanche breakdown.
Perfect Saldí erosion diode.
Ideal diode in Avalanche breakdown
Perfect Solid Diode.
Breakdown overview performance.
The best irreversible conductor.
ISO ICS perspective!
Harden your life on carbon.
Invent a futuristic device.
Voltage applied is forward bias and like a perfect insulator when voltage applied is reverse bias.
In reverse bias, current is produced in a micro ampere range.
In forward bias, current is produced in a short circuit.
When positive voltage is applied across the anode and negative voltage is applied across the insulator,
it acts like a short circuit.
When positive voltage is applied across the anode and negative voltage is applied across the cathode,
that means forward biased.
Forward bias conducts forward current instantaneously.
When positive voltage is applied across the anode and negative voltage is applied across the cathode,
that means forward biased, it conducts forward current instantaneously.
Similarly, when reverse biased, diode conducts no current.
This is the graph.
Positive voltage conducts maximum current in forward bias.
In reverse bias, it does not conduct any current.
So, you can see that when the diode receives forward voltage,
it instantaneously conducts infinite amount of current to a circuit.
When reverse voltage is fed to the diode, it conducts no current at all.
In reverse bias, it does not conduct any current.
This diode acts like a single pole single throw switch.
If the switch is closed, it acts like a closed switch.
In reverse bias, it acts like an open switch.
The ideal diode, therefore, is a semiconductor device that is not a switch,
but functions as a perfect and intelligent switch,
which knows when to shut off and turn on based on the voltage applied to its junction.
The ideal diode is a semiconductor device that is not a switch,
but functions as a perfect and intelligent switch.
The ideal diode is a semiconductor device that is not a switch,
but functions as a perfect and intelligent switch,
which knows when to shut off and turn on based on the voltage applied to its junction.
The ideal diode is a semiconductor device that is not a switch,
but functions as a perfect and intelligent switch.
The ideal diode is a semiconductor device that is not a switch,
but functions as a perfect and intelligent switch.
The ideal diode is a semiconductor device that is not a switch,
but functions as a perfect and intelligent switch.

