noc18-mm11 Lec 25-Image Forces on Dislocations

IIT Kanpur July 201
20 followers
Dec 3, 2023
Okay, so let us come back to our derivation of force onto a particular dislocation.
So if we showed that if you have a edge dislocation, so let us say this is the edge dislocation
on whose Berger vector as given by b1, b2, b3 and it is inside a field where sigma is
the stress field.
This sigma stress field could be arising because of another dislocation or any other thing.
At this particular point we saw that this is how the force looks like and without loss
of generality what we did, we have to have a line direction for this particular dislocation.
So we took the dislocation line as epsilon equal to 0, 0, 1 if you remember and the Berger
vector which has to be perpendicular to it, it can be b1, b2, 0 or without again loss
of generality.
We can make it that it is b1, 0, 0.
So this is the Berger vector and when we do that this becomes the force onto this particular
dislocation arising out of a stress field given by sigma where these are the different
components of sigma was this.
This is what we derived last time which means that this is fx, this is fy and this is fz,
fz will be 0 because we have a line dislocation, edge dislocation, there will be no forces
in the z direction.
Now here up to this point we are assuming just any stress field, but now again we make
it simpler and we say that this stress field is also because of another dislocation.
Again this sigma 21 comes out from the stress field of a edge dislocation which is aligned
along 0, 0, 1.
So we are assuming that this first dislocation because of which this stress field is arising
is also aligned along the same direction as this particular dislocation onto which we
want to calculate the forces and then this fx and fy come out in this form.
So now looking at this fy is the climb force and this is the glide force.
We know that we have already briefly touched upon the topic that climb will be activated
when temperature rise takes place because it involves emission or absorptions of vacancies.
So let us look at the glide force right now.
Now let us look at glide force, the form of the glide force.
Let us say we want to talk about what are the values at which fx by l will be equal
to 0 for what values of x.
So you can clearly see that if you put x equal to 0 then this will go down to 0.
If you put x equal to y meaning it is at a 45 degree angle then again this term comes
down to 0.
Another thing that you will notice is that when x is less than y is greater than 0 meaning
it is at an angle which is less than 45 degree from the horizontal then what will happen
is that here you will have x square minus y square.
So this quantity is less than y square and therefore overall this component will be negative
implying that the force will be less than 0.
Similarly when this x becomes greater than y then you would see that fx by l is greater
than 0.
So some of the things that we can directly derive from this relation.
Now if you try to plot this how would it look like let us see how does this plot look like.
So what we will do is we will on the y axis we will have the fx by l.
So on the y axis we have fx by l, but on the x axis what we will do is we will keep
x in terms of y meaning it is x, but we will plot it in terms of how many y because we
have seen it even if you remember from the stress field it changes at 45 degrees and
therefore it is much more easier and more meaningful to understand with respect to y.
So we will say x in terms of y 1y, 2y, 3y, 4y and so on.
Similarly we can have minus 1y, minus 2y, minus 3y and minus 4y and what we have already
showed that fx by l will be equal to 0 when x is equal to 0, fx by l will be equal to
0 when x is equal to y and it will be negative in between this region and beyond this it
will be positive and when you plot it you would find that this comes out like this and
from this and from the equation you would be able to see that there is a inverse symmetry
over here.
So you would when you plot it like this on the other side.
So this is how it will look like.
What are the things that we can, so let me first again show what is our configuration
here.
Our configuration is something like this.
So this is a dislocation which is creating a stress field and this is the dislocation
on to which we are trying to calculate the force.
So it is on to this dislocation we are calculating fx by l and when we say x equal to y we mean
this dislocation.
So this is the x, this is the y.
So when x is equal to y it means it is at 45 degrees, when x is less than y it is less
than 45 degrees and when it is greater x is greater than y it means it is less more than
angle is more than 45 degrees.
So you can say approximately somewhere here you have the 45 degree line and this is the
dislocation on to which we are calculating the force and this is how the fx by l as a
function of x looks like.
So when we have x which is equal to 0 somewhere over here we see that fx by l is 0 and if
we keep increasing x until the point that we reach this point where x is equal to y
it is exactly at 45 degrees then again it becomes 0.
However when it is less than y which means somewhere over here, so our dislocation would
be x is here somewhere like this and y is equal to this therefore somewhere over here
we have this and in this particular condition what we have is fx by l is less than 0.
So it is negative and if we keep moving it like this so what we are doing is we are moving
this dislocation along x direction and at up to this point it is negative at this point
it is 0 and beyond it is positive.
So what does that mean that if it is less than negative or less than 0 meaning negative
meaning if you have dislocation somewhere over here so let me draw it with another color
it is it tends to move the forces in negative direction.
So it tends to move like this if it is at exactly at this position then there is no
force if it is somewhere over here it tends to move like this.
So what is the meaning of this it means that this particular dislocation if it is in this
range somewhere here to here which is up to y it tends to align.
So it tends to form a stable configuration like this if it is beyond this then the forces
are positive meaning it tries to move it in the positive x direction and therefore
it moves away from this particular line and it will go away into this direction.
Similarly if we put it like this on the other side up to this particular position it will
tend to come back to this region and at this particular point it will tend to move away
meaning this particular point is also unstable meaning it does not as soon as it moves away
from here it will either move here or it will move over here.
So this is one particular finding that we can directly derive or directly see once we
write down the equation and we plot how the fx values are changing.
The other configuration is something like this so let us say we have the dislocation
so this one which is creating stress is like this and there is a stress field because of
this and the other dislocation has a minus Berger vector and therefore it is in opposite
direction opposite sign like this.
So again this is our x this is our y and if you put those values into the relation what
you would see is that it will show something like this.
So it will also be 0 at this particular point but it will be negative for negative x values
and positive for up to y and so you will see force values changing like this.
Now over here if you are somewhere over here meaning between this point to this point the
forces acting on to this dislocation are in this direction.
If you are away from y or higher greater than y meaning at angles less than 45 degrees
then it would mean that the forces are negative meaning they are trying to bring it here.
So this in effect means that it is a stable it forms a stable configuration of or a pair
like this.
So this pair which is at 45 degree would tend to remain at 45 degrees on the other hand
a pair like this where the 2 dislocations are of the same sign they tend to align.
So in the end what you will in this particular case what you will get are dislocations aligned
like this because the forces are acting in that direction.
On the other hand in this particular case what you will tend to see is dislocations
if they are opposite sign and if they are alternating then they will form at a 45 degree
angle and this will be the stable configuration.
So we are able to get so many information just based on simple as you saw using this
peach collar relation we were able to derive the force values and then we were able to
simplify it for 2 dislocations a pair of dislocations where one of them is creating the stress the
other one on to which the dislocation is acting on to it and by again taking a little bit
more simplification and loss of generality without loss of generality that the line vector
is along 0 0 1 while the Berger vector is only along 1 b 1.
We are able to get such a simple relation from which we can directly plot this force
values and we can see what will be a stable configuration when you have all dislocations
of same type.
And if you remember or if you have been exposed to a little bit of physical metallurgy you
would know that these kind of dislocation arrangement is also called small angle or
low angle grain boundaries.
So automatically if you allow the dislocations to move they will align like this and form
because each of them will actually give a small misorientation between the 2 crystals.
So a set of these would give a definite or some significant amount of this misorientation
between the 2 depending on what is the gap between the dislocations and therefore there
it will form somewhere between 0 degree to 15 degree grain boundary.
Beyond 15 degree what happens is that we do not call it small angle grain boundary as
the dislocation course start to overlap we will come to that most likely in the second
part of this course.
So this will form a small angle or low angle grain boundary.
Similarly you can also derive the relation for what will happen if you have screw dislocations.
So if you have one screw dislocations another screw dislocation you would see that the configuration
would be similar only or the forces will force field values will be similar only that the
absolute magnitude would be a little different as we know that the forces are little different.
Actually let me correct that there will be a little different kind of forces on to this
because the terms in the tensor matrix are very different for screw dislocation sorry
I take that back.
So when you are talking about screw dislocations different kinds of forces and that is something
we can practice as one of the example problems later on.
So for now let us move on to another aspect of interaction between the dislocations which
is what is called as image forces.
Now we saw that dislocations react to the presence of other dislocations but in materials
there is also reaction or forces acting on to dislocations because of imaginary dislocations
and these are what are called as image forces what do we exactly mean let us see.
So let us say that you have a single crystal like this.
Now let us say that there is a dislocation like this which is some distance d away from
the surface.
Now for dislocations which are very close to the surface they experience an attractive
force, attractive force meaning something assuming that there is a dislocation of opposite
verger vector lying somewhere over here and at a distance equal to d.
So what will be the force between these 2 dislocations again if you go back you would
see that this will be a attractive force meaning fx by l on to this dislocation is negative
or in this particular case it is positive meaning it is trying to pull it out.
If we were to calculate on this it will be negative.
So since it is already a negative verger vector fxi by l is negative which would mean that
it is moving in the plus x direction.
So you can actually so yeah so let me correct that since b is negative fx by l is also negative
implies force is acting towards positive x direction.
So the net effect is that this dislocation is forced or tries to move towards the surface
and this is this phenomena is called the image force because you can see why it is image
because there is no real dislocation over here.
But there is still some force acting on to it probably some kind of ability of the material
to decrease its energy by annealing out the dislocations.
But whatever it is the total force acting on to this has been found that it is related
to as if there was opposite sign dislocation some on the distance away from the surface
as it is inside the surface and therefore it is called image force.
So there is a image dislocation with different verger vector of course with a negative verger
vector because that is what is causing it to be attractive force.
So the better word here is force is attractive.
So that we do not get confused on what is the verger vector sign and whether it will
be in the positive x direction or negative x direction.
All we need to know is that it is attractive and since it is the image is on the outside
so it moves towards the surface.
So that will ensure that we do not get confused with signs of the verger vector and signs
of the forces.
So in words what we can write is that dislocations near free surface experiences force which
is not encountered in the bulk which pulls it towards surface.
In other words are equivalent to this a negative edge dislocation.
So for a positive edge dislocation a negative edge dislocation at similar distance from
surface outside the surface but pulls the dislocation out.
So this is what we imply when we say image forces.
And the relation for this would be very simple if you go back to our equation it will be
because the distance is now 2d therefore all we need to do is the force will be described
as negative 1-nu 2d into 4d square.
So this is x this is x square-y square and this is x square plus y square whole square.
So this is 16d to the power 4 and therefore it is now this is the force acting on the
edge dislocation.
Now if we were to similar phenomena can also take place for a screw dislocation.
So instead of edge dislocation you could as well have a screw dislocation like this and
at a similar distance from this outside it there will be opposite screw dislocation.
So this is a artificial dislocation.
So the real forces are acting on to this and the real forces are trying to pull it like
this.
And this fx for screw it will not what will be different will be that it will not have
this 1-nu term because this 1-nu term if you remember gets included only in the edge dislocation
leading to higher energy larger force requirement for edge dislocation.
For a screw dislocation this is lower energy and hence lower force requirement.
So this is the force that this dislocation is experiencing if it is screw dislocation
this is the force that the dislocation is experiencing if it is a edge dislocation.
Now will that cause any change there is of course force i can be applying force on to
something i can be applying force on to this screen.
But is it really leading to some work or is it leading to any change.
It will only happen in this particular case when the resistance to the dislocation movement
is greater or sorry this force is greater than the resistance to the dislocation movement.
So only if fx is greater than resistance to movement this fx will lead to you can
say annealing out of the dislocation because once it starts it means that it can its force
will keep increasing further and further.
And therefore once it starts it will move all the way up to the surface and therefore
it will get annealed out leading to annealing out of dislocation.
So the dislocation spontaneously leave the crystal given that fx is greater than resistance
dislocation will spontaneously why i am saying spontaneously because without application
of any external stresses spontaneously leave crystal spontaneously meaning without application
of external stress.
This is a very, very interesting phenomena the dislocations on the surface are leaving
the crystal and therefore very, very near the surface there it will be dislocation free.
So you may think that if i am talking about a bulk material how does it matter that will
this length would probably be of the order of few 100 nanometer at the most because the
force would be greater than resistance only in that region.
So you will have dislocation free only in the few top 100 nanometer but rest of the
several millimeter or centimeter of the component would still have as much dislocation.
But this will become interesting if you are considering nanoscale components or nanocrystals.
So let us say our crystal size itself is few 100 nanometer in fact let me make it to exaggerate
this concept let me make it cylindrical.
So let us say this is a nanocrystal single crystal and the diameter here is few 100 nanometer
and let us say that only 20, 25 nanometer of the surface experiences force large enough
that dislocations can move.
Therefore up to this some region which is let us say close to 20 nanometer on every
side.
So something like this, this region is dislocation free.
Now keep reducing the diameter of this cylinder let us now bring it down to 40 nanometer what
happens this nanocrystal is completely free of dislocations.
So this is the interesting aspect of this image forces if we are talking about nanocrystals
then these nanocrystals can be completely dislocation free.
So up to a certain size up to a small certain width or the diameter up to a certain diameter
you can get dislocation free crystals.
What will this d depend on this d will depend on there what we have described here as resistance
to movement this we will later see on is what is called as pearl Nabarro stress.
So if your force that is that these dislocations are experiencing this is larger than the pearl
Nabarro stress which is what is actually the lattice resistance to movement then the dislocations
will be able to move.
And once you know this value the pearl Nabarro stress you would be able to find out what
is the d diameter d for which you will have a dislocation free crystal.
And therefore you can get very, very high strength you remember from the first class
that we said that if there are no dislocations then you can get very large strength and that
is the origin of so high such high strength in nano viscose.
You may have heard about in viscose in fact viscose itself are nano size but let us call
it nano viscose to stress the fact that the they are crystallines crystallites with very
small sizes.
So they are of the nano order and since their length or of the dimensions are smaller than
this particular critical dimension d they will have will be dislocation free and therefore
these viscose will have very high strength.
So even in metals we can get very, very high strength if we can get to nano size nano viscose
and this can be used as composites.
So next time we will come back and we will move on to more about dislocation motion we
have said that there are 2 motions glide and climb.
So we will look more at those topics in the next class.
So we come to an end to this image force thank you.
