Mixed Signal Circuit Design-ADC Architecture
Oct 6, 2023
The figure shows the block diagram of a two-step flash ADC.
The converter is separated into two complete flash ADCs with a feed-forward circuit.
The converter is split into two flash ADC circuits.
One flash ADC circuit and another flash ADC circuit.
The first converter generates rough estimate value of the inverter.
The first converter generates the rough estimate value of the inverter.
The first converter generates the MSB bit.
The second converter performs fine conversion to set the LSD.
The advantage of this is that the number of comparators is generally reduced from
2 into 2 raise to n minus 1 comparators to 2 into 2 raise to n by 2.
In the case of flash converter, the number of converters was 2 raise to n minus 1.
The advantage of this is that the number of converters was reduced from 2 into 2 raise to n by 2 minus 1 comparators to 2 into 2 raise to n by 2 minus 1.
The disadvantage of this is that the conversion process takes two steps instead of one with speed limited by bandwidth and settling time.
In the case of flash converter, the conversion process takes two steps instead of one with speed limited by bandwidth and settling time.
Let's see how the conversion process takes place.
After the input sample, MSB are converted by the first flash ADC.
The result is then converted back to analog voltage.
The result of subtraction is known as residue.
The residue is then multiplied by 2 raise to n by 2.
The multiplication process is done so that the two ADCs do not work identically.
The second ADC produces least significant bits through flash conversion.
This figure shows the conversion process using two-step ADC.
MSB is used to find the conversion values.
ADC is a pipeline ADC.
ADC is an n-step converter with one bit being converted per stage.
ADC is able to achieve high resolution at relatively fast speed.
Let's see the block diagram of a pipeline ADC.
There is a one-bit ADC at each stage.
There is a sample-and-hold circuit.
There is a summer.
There is a two-gain amplifier.
These are the functions performed at each stage.
This is the first stage.
The output of each comparator is the bit conversion for that stage.
MSB is used to find the conversion values.
If VIN is greater than Vreference,
the output of the comparator will be 1.
Vreference divided by 2 will be subtracted from the voltage.
If Vreference is greater than Vreference,
the output of the comparator will be 0.
Then the value future is 0.
The output of the comparator will be 0.
The input value of the comparator will be the output of the differential .
The output of each stage in the converter is referred to residue.
Multiply the result of summation by 2 and pass the result to sample and hold of next stage.
The output of each stage in the converter is referred to residue.
Multiply the result of summation by 2 and pass the result to sample and hold of next stage.
This is the special feature of the pipelining architecture.
Let's see the advantages of pipelining architecture.
Advantages are high throughput.
After an initial latency of n clock cycle, one conversion will be converted per clock cycle.
Disadvantages are having initial n clock cycle delay before the first digital output appears.
This is the main disadvantage of pipelining architecture.

