Don't forget to Like, Comment, and Subscribe so you don't miss future videos
When any of my small engine equipment fails, one of the first things I check is the spark plug. Spark plugs fail way more often than they should because many brands are made with cheap parts. This video shows how to easily test a spark plug before you head out to the store to purchase a new one.
*My description includes referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!*
Welcome back, guys. It's the Tightwad, and today I'm going to be showing you how to test
your spark plugs to see if they are still good or if they need to be replaced.
And I'm going to do a little bit of explaining about the parts of a spark plug, and then I'll
show you how to test them. The testing actually takes less than a minute to do so if you have a
multimeter. So a spark plug always has a number on it, and this one is an RC12YC at the bottom.
That's the type spark plug I need for my rotary tiller that I use to till my garden every year.
And this one went bad, so I went to the store and got a replacement,
and this one actually shows a different number here, BKR5E, but on the packaging
it shows the champion RC12YC, so it matches my original number. This is just a different brand,
so it could potentially have a different number, but it will have any that it matches
showing on the package. If you have a spark plug that has an R in the model number of it,
that means that there is a resistor inside the spark plug. Resistors are made to keep it from
interfering with things such as a car radio or a camera, so a lot of times they're not found
in spark plugs that are used on lawn equipment. All right, so in a spark plug you'll see that
there is a porcelain piece here. This porcelain piece actually extends all the way through to the
back of the spark plug, and you can see it come out on the tip back here encasing the end of the
piece that runs all the way through the middle. So there's a metal piece that runs from here
all the way to the tip here, and that piece has a tendency to break, crack, and go bad.
To test for ohms, you need to change your multimeter to the ohms setting. On mine it's
indicated by the letters OHM. On some multimeters it's indicated by the horseshoe symbol,
upside down horseshoe, or omega if you're familiar with the Greek alphabet.
And I like the 20k setting, so anything between 10 and 20k is fine. If you don't have 20k,
you can always go up higher. And now we're going to test the spark plugs. So to test a spark plug
for resistance using the ohm setting, you're going to touch one of the leads to this end of
the spark plug. And remember I said there is a metal piece that goes all the way through the
center of the spark plug, and there is a resistor inside the metal piece. And then the other end of
the spark plug has this little tip on it. This tip is where I want to touch my other lead. So I have
one lead on the bottom down here and one lead on the top. And you actually need to touch the top
of that piece, not the side of it, to get an accurate reading. So I'm going to touch my leads
together to start, and you'll see that I get a reading and then it zeroes out, letting me know
that my multimeter is functioning properly. So I know my battery's not dead and there's nothing
else wrong. All right, I'm actually going to use the side of this piece down here because it keeps
the whole spark plug from rolling around. And then I'm going to touch the top up here. All readings
of ohms I mentioned are actually in thousands. So when I say 6 ohms, I'm referring to 6,000 ohms.
You'll see that I get a reading of 6 ohms exactly. Anything between 5 and 15 ohms is pretty normal
for a spark plug made for a small engine, such as most of the things used for your lawn equipment
at your house. What I should not get is a reading anywhere else on this spark plug. So if I touch
any of these other parts, I should not get any resistance. If I got resistance here, that would
mean that something is wrong where this metal shaft is coming into contact with this piece,
or it's somehow leaching through the porcelain getting to here, indicating that it is now a
faulty spark plug. So we shouldn't get any resistance on any other portion of the spark
plug, except for the tip of the metal piece here. Now that we know that one's good and was brand new,
I'm going to test this old one that I removed from my rotary tiller. So again,
I'm going to start here and I'm going to come up to the top and touch the very tip of this spark
plug. And I get no readings. And that means something between here and here is broken.
It could be the resistors gone bad or that there's a crack in the metal piece or a crack in
the insulation. But we know that this spark plug is no longer good because it didn't give us any
readings. One thing you do have to be careful for is if you have a dirty old spark plug, it could
have some carbon buildup. So you need to take a wire brush and clean this tip of the spark plug,
or you can also spray some brake cleaner on it to get it nice and clean. Spark plugs with
resistors typically have a higher reading of ohms than spark plugs without a resistor. So this
particular spark plug does have an R in it. So we know that's why we have a reading of five or six
ohms. If it did not have a resistor in it would have a reading closer to one or two ohms. If your
spark plug does have a resistor and you get up into the 15 ohms range, that could be a sign that
your spark plug is starting to go bad. Anywhere between the 5 and 15 ohms range on a small engine
style spark plug with a resistor inside should be fine to use. If it doesn't have a resistor,
you're looking for anywhere from 1 to 5 ohms. I hope you found this video helpful. If you did,
give me a thumbs up and subscribe to my channel. Leave any questions you have in the comment
section below. If you want to see one of the other videos displayed on the screen right now,
just click them and they'll open right up on your device. I hope you guys have a great day.