DYNAMIC CHARACTERISTICS OF COMPARATOR || EC462 MSCD ||MIXED SIGNAL CIRCUIT DESIGN || KTU || MODULE 3
#ktu #s8ece #mscd
For full class:
https://www.youtube.com/playlist?list=PL2UV2EJdMQmim5UHGAuX6HtsAVCRB-2Ix
Hi all last class we were discussed about the static characteristics of comparator. What is a comparator?
What are its static characteristics that that where we discussed on last class today? We are going to discuss
dynamic characteristics of
Comparator so what is dynamic characteristics of a comparator?
Dynamic characteristics of a comparator include both small signal and large signal behavior
The characteristics delay between input excitation and output transition is the time response of
the comparator
This figure illustrate the response of a comparator to an input as a function of time
the delay between input excitation and output response is called
propagation delay of a propagation delay time of the comparator
Dynamic characteristics are the characteristics of both small and large signal behavior
of a comparator
In this characteristics, we can see that the input excitation and
This figure shows the response of a comparator.
Input is a function of t.
The output response is corresponding to the output response.
This figure shows the output response of a comparator.
Input is a function of t.
The output response is corresponding to the output response.
We can observe a delay between input and output.
This is called a propagation delay.
Input is a function of t.
The middle point of input is Vih plus Vil divided by 2.
Input is a function of t.
The middle point of input is Vih plus Vil divided by 2.
Input is a function of t.
The middle point of input is Vih plus Vil divided by 2.
There will be a delay in transmission.
The delay between input excitation and output response is called propagation delay.
The delay between input and output is called propagation delay.
The dynamic characteristics are large and small signal behavior.
This figure shows the corresponding time response.
Propagation delay time is often the speed limitation in the conversion rate of an A to D converter.
The comparator is used for analog to digital conversion process.
Propagation delay time in comparators generally varies as a function of amplitude of input.
Propagation delay time depends on the amplitude of the input.
If the input is large, the delay time will be small.
If the input is large, the comparator will behave faster.
A larger input will result in a smaller delay time.
There is an upper limit at which a further increase in input voltage will no longer affect the delay.
In the last class, we discussed the case of static converter.
This mode of operation is called slewing or slew rate.
This is a simple model comparator.
The corresponding equation for the differential voltage gain of the comparator is given.
The differential voltage gain can be written as Av of 0 divided by S by omega C plus 1.
This is the corresponding transfer function in the case of a first order converter.
If we consider a simple model of a comparator, the differential voltage gain can be written as Av of 0 divided by S by omega C plus 1.
Av of 0 is the DC gain in the case of a comparator.
Omega C is 1 by tau C.
Omega C is the 3 dB frequency of single pole approximation to the comparator frequency response.
Omega C is 1 by tau C.
We can assume a simple behavior of a comparator and its differential voltage gain can be represented as Av of S.
Av of S is equal to Av of 0 divided by S by omega C plus 1.
Av of 0 is the DC gain.
Omega C is the minus 3 dB frequency of a comparator.
Normally, Av of 0 and omega C of the comparator are smaller and larger respectively.
Assume that the minimum change of voltage at the input of the comparator is equal to the resolution of the comparator.
The minimum change of voltage at the input of the comparator is equal to the resolution of the comparator.
The minimum input voltage is equal to Vinmin is equal to Voh.
Voh is the saturation value of high value.
Voh minus Vol divided by Av of 0.
Av of 0 is the DC gain of the comparator.
The minimum input voltage is equal to Voh minus Vol divided by Av of 0.
Step input voltage is the output of the comparator modelled by equation 1.
Step output voltage is the output of the comparator modelled by equation 1.
Step input voltage is the output of the comparator modelled by equation 1.
The output of the comparator modelled by equation 1 is the output of the comparator modelled by equation 1.
If Vin is larger than Vinmin, the output rises or falls faster.
When Vinmin is applied to the comparator, we can write the following equation.
Voh minus Vol divided by 2 is equal to Av of 0 into 1 minus e raised to minus tp by tc.
So, this is the equation for propagation delay of a comparator.
tp maximum is equal to tau c ln 2 which is equal to 0.693 tau c.
This propagation delay will be valid for either positive going or negative going comparators output.
If the applied input is k times greater than V in minimum, then propagation delay will be valid.
These are all about the dynamic characteristics of a comparator.
In this figure, you can see the input and output of the comparator.
There is an upper limit at which further increases in the input will no longer affect the delay.
Av of 0 is equal to Av of 0 divided by S by omega c plus 1.
The minimum change of voltage at the input of the comparator is equal to the resolution of the comparator.
The output of the comparator is equal to Av of 0 divided by S by omega c plus 1.
The equation of propagation delay is tau c into ln 2k divided by 2k minus 1.
These are all about the dynamic characteristics of a comparator.
Hope all of you understand this topic.
See you in the next class.

