Phase Locked Loop part 2|| problem of lock acquisition || Phase Frequency Detector(PFD)|| MSCD
#ktu #s8ece #mscd
For full class:
https://www.youtube.com/playlist?list=PL2UV2EJdMQmim5UHGAuX6HtsAVCRB-2Ix
Last day we discussed about the basics of phase lock dilop and phase lock dilop topology
Today we are going to learn about the problem of lock acquisition and PFD or Phase Frequency Detector
So let's first look at the problem of lock acquisition
Yesterday we discussed about the PLL circuit and how it works
What happens when the PLL circuit is turned on?
There is a voltage controlled oscillator or VCO
The frequency of that VCO is far away from the input frequency
At that time, the loop is not locked
Going from unlocked to locked is a non-linear phenomenon
Last day we discussed about the phase detector and its anechoic frequencies
We also discussed about the output frequency and input frequency
The main problem of this is the acquisition range
When we learn the topology, we learn that we are using a low pass filter
We are using a low pass filter to control the ripple
When we are using a low pass filter, the lock acquisition becomes a problem
The difference between the output frequency and the input frequency when the loop is locked
The difference occurs when the frequency of the loop is less than the frequency of the low pass filter
When the frequency of the loop is more than the frequency of the low pass filter, the lock acquisition does not occur properly
This acquisition range is the main problem of PLL
This diagram is to avoid the acquisition problem
How to avoid the acquisition problem?
In modern PLL, a new technique is added
Frequency detection in addition to phase detection
In modern PLL, a new technique is added
Frequency detection in addition to phase detection
This is called aided acquisition
Frequency detection in addition to phase detection
This is called aided acquisition
This is the idea
We use a frequency detector to compare the input and output frequencies
The output frequency is generated by a DC component called VLPF2
VLPF2 is proportional to the difference between the input and output frequencies
This result is applied in the negative feedback loop in VCO
When the modulus of omega out minus omega in is sufficiently small, the phase locked loop takes over the acquiring lock
We can increase the lock acquisition range and reduce the lock acquisition problem
Let's see the charge pump PLL
In the case of periodic signals, we can merge the phase feedback loop and the frequency feedback loop
This is called a phase frequency detector or PFD
In figure 2.11, you can see the block diagram of a PFD
In this figure, we can see the rising edges
QA detects a rising edge
This is the process in this figure
If initially QA, QB, 0, then a rising transition A leads to
When A starts, you can see that A and B are 0
Then A moves from 0 to high
In that rising transition, QA becomes 1
QB stays at 0
QA becomes 1
QA stays at high till B becomes high
QA moves from high to low
In figure 2.11, A and B have same frequency
But A leads to B
QA produces pulses
The width of the pulse is same for A and B
QB stays at 0
In figure 2.11, A has higher frequency than B
QA produces pulses
QA produces pulses because A has higher frequency than B
In figure 2.11, A has higher frequency than B
Let's see what happens if A and B are unequal frequencies
If we use a flip-flop as a frequency detector
It should exhibit an average value of output voltage
If A has lower frequency than B
If A has higher frequency than B
It should exhibit an average value of output voltage
In figure 2.11, A and B have same frequency
Let's see the circuit of phase and frequency detector
In figure 2.13, A has simple implementation
In figure 2.13, A has simple implementation of PFD
In figure 2.13, A and B work as a clock
QA and QB are 0
If A is high, QA will rise
If A is high, QB will rise
If A is low, QB will rise
If QA and QB are simultaneously high
Average value of PFD will represent the frequency difference
In figure 2.13, A has input output carrier of 3-state PFD
In this way, we can utilize this in a PLL
The PLL circuit which we have used is known as Charge Pump PLL
In the next session, we will discuss about Charge Pump PLL in detail
Thank you

