TWO STAGE COMPARATOR || EC462 MSCD ||MIXED SIGNAL CIRCUIT DESIGN || KTU || MODULE 3
#ktu #s8ece #mscd
For full class:
https://www.youtube.com/playlist?list=PL2UV2EJdMQmim5UHGAuX6HtsAVCRB-2Ix
In the last class, we learned about a comparator and its static and dynamic characteristics.
Today, we are discussing about a two-stage open loop comparator.
So, let's see what it is.
A comparator requires a differential input and sufficient gain to be able to achieve desirable resolution.
We learned about resolution in the last class.
Resolution is the minimum input voltage required for a transition.
A comparator requires a differential input and sufficient gain to be able to achieve desirable resolution.
The two-stage op-amp used in open loop mode makes an excellent implementation of the comparator.
The two-stage op-amp is an excellent example of a comparator.
It is preferred not to compensate the comparator so that it has largest bandwidth possible, which gives fastest response.
A two-stage uncompensated op-amp shown in figure used as a comparator.
Performance of two-stage open loop comparator.
Output stage is a current sink inverter.
The maximum output voltage assuming to the gate of M6 has minimum voltage given as Vg6 minimum can be expressed as.
Minimum output voltage assuming to the gate of M6 has minimum voltage given as Vg6 minimum can be expressed as.
Two poles are assisted by this comparator.
First pole is minus 1 divided by C1 into Gds2 plus Gds4.
Second pole is minus 1 divided by C2 into Gds2 plus Gds4.
Two such poles exist in this uncompensated comparator.
The frequency response of this comparator is Av of 0 divided by 1 plus S by P1 into 1 plus S by P2.
These are the equations for two-stage open loop comparator.
This is an uncompensated open loop comparator.
See you in the next class.

