RC LPF STEP INPUT || ECT202 ANALOG CIRCUITS || EC205 || ECT 281 ELECTRONIC CIRCUITS || KTU
This video explains how RC Low pass Filter to step input
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
Hi all, today we are discussing how a RC low pass filter works according to a step input.
First, we can draw a circuit diagram of a RC low pass filter.
A resistor and a capacitor for the RC low pass filter.
This is the circuit diagram of the RC low pass filter.
Even if you ask where the low pass filter is, we will first draw this circuit diagram.
This is the circuit diagram.
Input is Vi.
Current is I.
First, we will draw the circuit diagram.
Then, we will see how the RC low pass filter works according to a step input.
First, we will define the step signal.
Step signal is denoted by U of T.
U of T is equal to V4.
T greater than or equal to 0.
Otherwise, 0.
This is the step signal.
U of T is equal to 1, 4.
T greater than or equal to 0.
Otherwise, 0.
This is the unit step.
Step input is multiplied by a scalar value.
Here, it is multiplied by a value called V.
Its volt is V volt.
For T greater than or equal to 0.
Otherwise, 0.
This step signal is given as an input.
The value of V is 0 to infinity.
The value of V below 0 is 0.
We are giving a voltage called V to this circuit.
When we give a positive potential called V,
what happens?
This capacitor charges.
When we give a step voltage called V as an input,
what happens to this capacitor?
It starts charging.
Where does the capacitor start charging?
The value of the initial capacitor is 0.
Vi is equal to 0.
The initial value of the capacitor is 0.
How far will this capacitor charge?
It will charge up to V volt.
We are taking the output as a capacitor.
What will be the output voltage here?
It will be the output voltage of the capacitor.
We have studied the equation of the voltage in a capacitor.
The equation of the voltage in a capacitor is the equation of the charging of a capacitor.
V final minus V initial into e raised to minus T divided by RC.
This is the equation of the charging of a capacitor.
Capacitor charging Vc is equal to V final minus V initial into e raised to minus T divided by RC.
We have to study this.
This is the equation of the charging of a capacitor.
Vc is equal to V final minus V final minus V initial into e raised to minus T divided by RC.
What is Vc here?
It is the output voltage across the capacitor.
The voltage of the capacitor will be the output voltage.
The equation of the output voltage is Vout is equal to V final.
How far does the capacitor charge?
The capacitor charges up to Vout.
V final is equal to V minus V final is equal to V minus V initial is equal to initial.
The capacitor had no voltage before this.
So, the initial voltage is zero.
V initial is equal to zero into e raised to minus T divided by RC.
Rearrange this equation.
V minus V e raised to minus T divided by RC.
Or, V into 1 minus e raised to minus T divided by RC.
What is the equation of the output voltage?
V0 is equal to V into 1 minus e raised to minus T divided by RC.
Does the capacitor charge exponentially?
The capacitor charges exponentially.
Here, we are giving a step signal as input.
Input is a step signal.
Its value is V.
What is the output?
The output is Vout.
The capacitor is charging.
The capacitor is charging correspondingly to this step.
The capacitor is charging like this.
The maximum value of the capacitor is V.
So, while we are applying a step input to a RC low pass filter, we will get this signal.
This is the exponentially growing curve of the capacitor charging.
We need to know some terms in this.
Those terms are known as rise time.
Rise time is when the capacitor charges from zero to V.
Rise time is the time taken for a waveform to rise from 10% to 90% of its steady state value.
10% of the steady state value is the output.
Rise time is the time taken for a waveform to rise from 10% to 90% of its steady state value.
Let us calculate the rise time.
To calculate the rise time, I have written the output voltage equation.
Vout is equal to V into 1 minus e raised to minus T divided by RC.
We can take T1 at this time and T2 at this time.
Let us draw it again.
The output value is given by the unit step.
The corresponding time for 10% of this is T1.
10% is the output.
90% of 10% is T2.
Rise time is the time taken for a waveform to rise from 10% to 90% of its steady state value.
T is equal to T1.
Vout is equal to 10% of V.
That means 0.1 V.
Vout is equal to 10% of V.
That means 0.1 V.
What is the output equation?
Output is equal to V into 1 minus e raised to minus T divided by RC.
When T is equal to T1, the output voltage is 0.1 V is equal to V into 1 minus e raised to minus T1 divided by RC.
Now, we can cancel V and V.
0.1 is equal to 1 minus e raised to minus T1 divided by RC.
e raised to minus T1 divided by RC is equal to 1 minus 0.1.
e raised to minus T1 divided by RC is equal to 0.9.
Now, we are taking log for this.
We are taking log on both the sides.
We can rewrite this equation as e raised to T1 divided by RC is equal to 1 by 0.9.
T1 divided by RC is equal to 0.1.
T1 is equal to 0.1 RC.
We have found the value of T1.
Now, we have to find the value of T2.
Only then we can find the rise time.
To find the value of T2, I am doing this here.
I am doing T2 here.
When T is equal to T2, what is the output?
0.9 is equal to 90 percentage of output value.
At time T is equal to T2, Vout is equal to 0.9 volt.
The equation of output voltage is Vout is equal to V into 1 minus e raised to minus T by RC.
When T is equal to T2, 0.9 V is equal to V into 1 minus e raised to minus T2 by RC.
V and V are cancelled from both sides.
0.1 is equal to e raised to minus T2 by RC.
We can write e raised to T2 by RC is equal to 1 by 0.1.
It is the same method as we wrote earlier.
Now, we take log on both sides.
When we take log, T2 by RC ln e is equal to ln 1 by 0.1.
This implies T2 is equal to RC ln 1 by 0.1.
We get 2.3 RC.
Now, we have to find TR.
TR is T2 minus T1.
TR is 2.3 RC minus 0.1 RC.
The rise time is 2.2 RC.
When we input a step signal, the rise time is 2.2 RC.
Today, we discussed about step input.
When we input a step signal,
U of T is equal to V for T greater than 0, 0 otherwise.
When time period is 0, 0 to positive infinity is equal to V.
When we input a step signal,
V is the DC voltage.
At that time, the capacitor starts charging.
The output is across the capacitor.
The equation for capacitor charging is the output equation.
We have to learn the equation for capacitor charging.
Vc is equal to V final minus V initial into e raised to minus T divided by RC.
V final charges up to V.
V initial is 0 and V final is V.
When we substitute, V out is equal to V into 1 minus e raised to minus T divided by RC.
Based on this equation, we get the output.
When we input a step signal, we get an exponentially growing curve.
The important term in this equation is the rise time.
The output value of the rise time is given in 10 percentage.
The rise time is the time when the output value reaches 90 percentage.
When the output value reaches 10 percentage, it is T1.
When the output value reaches 90 percentage, it is T2.
T2 minus T1 is the rise time.
To find the rise time, we write the equation for T1 and T2.
From that equation, we get T1 and T2.
When we get T1 and T2, what do we do next?
We find T2 minus T1.
T2 minus T1 is the rise time.
The rise time is 2.2 RC.
I hope everyone understood today's class.
See you in the next class.

