It's Henry
Hey guys, how you doing? It's Henry and mowers and blowers
Good morning. It's the day after the storm and it's freezing as a result. All the snow is
Super hard and
Powdery on the top, you know, but I see on the bottom yesterday
I had a great time with my blue Bayou tractor with the plow and
And
My big boy my monster beast really did well, even though there was a couple of back backfires, you know
You know kind of a few pops here and there, you know
So I'm think I gotta do the valves
I think I might have to do the valves and maybe do a quick and dirty on the carb
You know I'm saying let me tell you about the quick and dirty so quick and dirty
I phrased it as a quick and dirty because what it is is if you have a snowblower
That's not exactly running great, but it starts and runs and it doesn't stall
Means that it just needs a little bit of cleanup the bowl probably on the bottom has some kind of gel
some debris that could get trapped up the main jet or the emulsion tube and
The little tiny pinholes that are in the emulsion tube could be clogged
So basically you just need to take the bowl down without taking the carburetor off and do some sprayage
Sprayage
so that I might do that with the big boy as well as the one with the
Mag wheels, you know cuz that kind of sputtered a little too, but it doesn't stall it did stall under a heavy load yesterday
But we had a load, you know, I mean
Anyway from a previous episode. I'm sure you guys remember
One of my subscribers Victor Gaines from LaGrange Ville, New York. He's been a longtime subscriber and
He actually bought some stickers, too
Anyway, he knew that I needed three craftsman 42-inch decks for my three haulers in the back
And he wanted to trade because it's just sitting around his house. You know what I mean?
So why he said he either wanted $40 for it or maybe you got something to trade
I'll be happy to trade and of course
I got that Bolin's push mower from Nick I already the other day and
He says just needs a carb clean, you know, and then what's funny is Victor told me
Listen, let's trade but don't touch it. I want something broken. I'm like, yeah, you know
Yeah, I want some broken so I can fix I said
Okay, I've got this Bolin's for you. He goes. Okay. So, of course, he told me the Grangeville
I'll be over in like a couple of hours on Friday, and I'm like a couple of hours
It'll take you four and a half hours. He's like no no no a couple hours
Whatever he's here two hours. He made it just like he said, I don't know how that's possible
Anyway, I'm gonna go get that deck out of his car and you guys can meet Victor
Here's Victor Gaines from the Grangeville, New York
Only two hours away, I can't believe it. There's no way
This is off a tractor. I bought along with two
leaf
vacuum shredder things
The tractor it was stripped
Terribly and almost nothing on it. No motor or anything like that, but it had this nice deck. So I'm keeping the tractor
I already put together a
Engine from several other engines and it's running
But I don't need the deck because I don't mow my own lawn. In fact, I've never mowed a lawn
What?
My parents hired people to mow their lawns. I hire a guy to mow my lawn
I've never mowed a lawn, but I love lawn mowers now. In your life?
That's right. How old are you? I'm 68. You're 68 and you've never mowed a lawn. That's right
There's something very suspect about that. I'm telling you really well
I mean, how much did they charge you to mow your lawn? A week?
Well, I have like two and a half acres. That's the reason right now why you shouldn't mow your own lawn
But given even two acres though, you think about the amount of fun you could have
Mowing two, right? If I had two and a half acres, how much fun would I have mowing my lawn?
Well the guy who comes he's got this giant
Zero turn and man, he's fast. Thing goes fast. How long does it take him? Oh probably an hour
At the most to mow the lawn and do the weed whacking around it and all that
That's really not bad for two and a half hours. Yeah. How much do you pay for something like that? 90 bucks?
No, 90 bucks a week. Yeah, that's out of control
You never get me to do that. I mean that's 400 bucks a month for goodness sakes just to take care of your lawn
I bet you're glad it's wintertime, huh?
Yeah, that's true. In fact, I do
Snowblow my driveway. This is decent bro. Thank you
That's perfect, that's exactly the kind that I have. I sharpened the blades there, I think they're fine. Fantastic
So we're gonna instead of $40. We're gonna trade. Yes for Bolin's
push mower
But then again you said I don't want you to fix it. I want something broken and I said
What?
Obviously he wants something to do, right?
I'm not trying to make money. I'm trying to just have fun. Well, I'm sorry to tell you that this one is not that broken
It just probably needs a carburetor clean and it's an excellent condition and when you fix it
You may have to mow a lawn for the first time
What do you think about that? Well, I do you know when I when I
Get them going. I do mow a little bit of the lawn to make sure that it's okay before I sell it. That's good
So we're gonna go in my backyard now
It's gonna be a little bit. It's gonna be kind of rough to get back there because the snow
Has built up over the gates so I can't you know what I'm saying?
It'll be a little bit to try to dig it out of there
You know and then lug it from my shed all the way over here in the snow. So that'll be a little bit
I'll put you guys on time-lapse so you can go with us
So
It was good to see Victor a nice guy
Gave him a couple of old three-post solenoids. You want to try to see that they worked on this tractor
Actually was the only ones I had left
I had a brand new one, but he didn't want to take the new one, you know
Anyway, then I got a call from a guy asking for one of my transmissions
if you guys remember the hurricane East I East tractor that I got with
Larry a while back
It was an Agway MTD, it's called an Agway, but it's like a yard machines one, you know
Anyway, I was in terrible shape. I needed it just for the engine
I remember stripping that down tore it all down and it had a
MTD transmission in it, you know five or six speed anyway, so I had it listed on Craigslist for the longest time
And finally some guy he wanted it for his project. So I just met him at the church
60 bucks
He I had it listed for 50, but he didn't have change so he just said here take it
I'm not gonna say oh I got change. You know what? I mean? He wants to give me $10 extra whatever
Anyway, he said it was just what he needed. I'm glad I could help him out
Anyway, so uh as you guys know from this it ran
Okay, you know it did stall a couple times during heavy load, you know
And I have a feeling that there might be some debris in the bowl of a carburetor
So I'm gonna do what's called a quick and dirty
Just put it on its service position take the bowl off and spray all the holes that you can see especially the emulsion tube
You know and put the bowl back on and see if it runs a little better
that's what I want to do with this one and I want to do that with the big boy to just to see if it'll
fix the
Popping sounds it has but I have a feeling I might have to adjust the valves
We're gonna put it on its service position, which is his face I
Remember this thing leaks gas when you do it, which it's doing right now
a lot of it
I'm gonna have to pinch it off or something
Got a clamp pinching off the fuel it'll drip and
We're gonna get to where the bowl is
Right there still dripping
Does see that I'm gonna get you closer and get a wrench take that bowl off
I've got you really close to the view of the bottom of the carburetor. It's actually a 7 16ths for
This type of carburetor where it has the screw in it the nut which is the fuel adjustment
screw
Because of the big wheels on this thing
Difficult to it's in the way. You know what I mean, but let's remove this screw and
Figure out what's in the bowl
Because this
nut has the
Jet in it. I have a feeling that it might be pretty clogged
So here we go
It looks a little dirty as you can see
If you guys could see that it doesn't look like it's open. It looks like there's some black stuff in there
Let's take the bowl off and see
Uh-huh, it has some black residue in there dark residue not terribly bad
Along that drain plug there that's you press it to drain fuel out like that
Right has some sediment there too. So it it is a little dirty, but not terrible terribly bad
I'm gonna take some carb cleaner and just blow it in through this
Emulsion tube area and then clean out the bowl and I'll show you what the jet looks like
So I'm using contact cleaner
For my friends over at Lucas oil. I don't know if you guys can see that
there goes the product placement because this
Mag wheel is in the way. I can't even get this in here like that, but I
Think I can manage
Stick the straw right around there
Blow the sound shows that it goes up the emulsion. That's all you really need to do
Curve the straw just to blow it out. I'm gonna clean the bowl
So I'm removing this
Adjustment screw as you can see there's some varnish on it, but it looks okay
My voice is a little raspy because I've been talking a victor all day, you know
So looky here
There's the hole there. I'm gonna take a zip tie. I had not a zip tie twisty tie
Just to get through this hole there and it's clear
Just gonna spray it
Clean this area there
Might be a super small hole. I'm not sure I'll have to look more carefully
I'm gonna clean this bowl, too. I
Was correct there is indeed a super tiny hole that you couldn't even see right above the big hole
See that
super tiny hole
The torch tip cleaners do not fit in there. You have to use twisty tie from a bread bag to get it clean
Okay, just just
Jet seems like it's okay
Spray a little bit
Wipe it clean
Clean the bowl now
There we go. So I'm just gonna put everything back and we'll see if it runs better
Okay, I just put everything back together again
To get the bowl on there and matching it up with the gasket, you know
ideally if this thing didn't run at all you would have to remove the heater box here the knob and
Remove the entire carburetor from the intake manifold if it was handy, you could easily probably take it off the intake manifold, you know
take the intake manifold off with the
Carburetor still stuck on it
This is a good sign. I just released the clamp and it is not leaking
Sometimes if you think that you might have pinched the gasket of the bowl, it may not be on right but it's not leaking
So I think it's okay
Now let's test the primer see if you can feel fluid going through
Sounds sounds okay
Let's just test it a bit. This is all heavy icy slush. I don't think it'll work. I just want to try
See what I mean by the slushy snow
How it gets clogged
Honestly, it wasn't bad though, huh?
Beautiful
See how nice this engine runs now just for a quick and dirty
And honestly, this did okay. I was really surprised. I didn't think it would I didn't think it would get that done, you know
So that's very cool
nice
Very cool
So the snowboard runs without stalling
Just by itself
but it kind of bobs down when you're
Under load when you're blowing snow
It's probably because you've got some residue in the bowl
some sediment
And your jet nut is kind of clogged now needs a nice opening for the fuel to get in there
So if you combust well, you can see it runs great just from a quick and dirty
That's how you do a quick and dirty carburetor
So
One of my subscribers Chad Bergen over at Bergen's garage go follow him on Instagram sent me a couple of
Brackets that he fabricated for me on his CNC plasma cutting machine and he sent it to me as a gift
Thank you very much. Chad. I really appreciate it
This bracket over here. I just basically
Placed on to my little radio flyer trailer tractor
Whatever my little trailer where I have my most used tools that I just pull out of my garage
And that's what I'll be using for fixing. Whatever. I was fixing. And so this is the rack where I can put all my impact
Drills and stuff like that and that holds very well
Also, he made me an air tools one. See it's actually CNC cut with the words air tools
As you guys know I got rid of my
Air tool air compressor as well as my air tools because I just never used them
You know what? I mean? I really just like my impacts, you know
That's all I use and I and I just just fine without them, you know
If I if I need it stronger, I have a half-inch impact that I plug into the wall and that works just fine, too
so these fit perfectly for
Some screwdrivers and a file which I always use and I'm always digging through my my mess to try to find them
so now I'll know I'll have
Phillips and flatheads big small medium whatever in a file ready when I need them on the other side is a
the same thing
This as you can see has been customized with the drill pattern in there. It's very cool
Since I only have three of those things
I have plenty of room for it. So instead I'm just using it to hold my my hammers
I only have two hammers to believe it or not
So this works out great
And I also have this thing that I got from Samuel Sandoval and that thing from Samuel Sandoval
And so I appreciate
all the gifts that my subscribers have been sending me because they know that I'm gonna use them in an episode or two in the
future I'm going to be using this a lot and
so
If you guys would like to send a gift to mowers and blowers contribute to the channel, feel free to do so
Just type in the comments for my email and my email is available at the description of every video that I make so you can
contact me that way and
We'll go from there. But thanks very much for everybody who contributes the gifts to the channel
It will be used in future videos and also be displayed your your wonderful work and your contributions are always displayed in the videos as well
So once again, thanks a lot to Chad Bergen over at Bergen's garage
bad thing for Bobo is that
he's really has no place to smell and pee and poo, you know and
Because there's no lawns anywhere. It's all covered with snow and stuff. So
So that's it for today's episode
Today, we just did a quick and dirty
Carburetor clean on this 522 push snowblower
I was running a little rough especially on load and I figured that it needed a little bit of a tune-up, you know
Whipped out the jet nut with the adjustable thing right cleaned out with carburetor spray
use the
Wire to clear the holes blew out some more as well as the emulsion tube inside the carburetor when we put it all together
Again, there was no leaks
started up great ran great and actually
It gets rid of that heavy slush
Pretty well for its size, you know
Also, thanks again to Chad for giving me some
CNC plasma cut tool brackets for my radio flyer tool trailer
also a visit from
Victor Gaines over in LaGrange Ville, New York
Who did a trade gave me a much-needed 42 inch mower deck for my craftsman lt1000
I need two more
But when it gets a little warmer, which is I don't know in the near future maybe not we'll install that
Well, we'll paint it black and then we'll install it onto one of my three haulers in the back all lt1000
So thank you very much for that and good luck with the Bolin's push mower that we traded for and I hope that those two
Solenoids I gave you at least one of them work, you know, but anyway, that's my video for today
Just doing stuff that needs to be done the day after a big storm, you know
I'm going to have to do a quick and dirty on this one and possibly
Adjusting the valves for that engine because there's a little pop pop pop sometimes, you know
And I think that could be the valves if you guys know the valve clearances
5 1000 4 1000 6 1000 to the exhaust and intake of the Tecumseh
13 horsepower snow king engine
Drop it in the comments. Will ya? Thanks a lot for joining me on today's episode. We'll see you guys next time on mowers and blowers
See you guys next time on mowers and blowers
Hey, you guys enjoy the video remember to give me a like also
comment below
subscribe
Remember, it doesn't cost anything to subscribe. It's free
Right also hit that little bell that way you'll get post notifications whenever there's a new video and you won't miss out on any of them
Remember to follow my instagram and facebook
As well as if you'd like to donate a dollar or two
Paypal.me slash mowers and blowers really appreciate all the support
Also to keep the videos coming every day
support the channel