Hey guys, how you doing? It's Henry at mowers and I'm back from my ski trip again
It's good to be back home again
Had a really good time with Andy from Jericho and his family as you saw from my video
You know what days worth of skiing was more than enough for this 52 year old, you know, I'm sore all over
As a matter of fact, I even questioned whether or not I was gonna get out of bed today and do a video
But so I wanted to give you guys an update on this Troy built
2620 storm dual-stage snowblower that I'm doing a repair on. Yes. I know
I don't usually do repairs
But I was low on content and I figure I'd do a favor for my friend Mike over at Mike's lawn service, Babylon
Anyways, you know, I replaced the carburetor on here as well as the carburetor
Bolt the stud that attaches the carburetor onto the engine block and that was broken
So I fabricated one to go on there
With the new carburetor on there quote-unquote new used but new
It runs pretty well as you know the
Directional shoot rod was missing from the snowblower and then I fabricated one to get it to work
It looks a little jig, you know, I know a little rudimentary, but it works, you know what I mean?
So I had ordered the OEM part for him for 30 bucks
So I got an update from that part
Can you believe that I bought the part from a guy?
It means that you list the product that's available
Somewhere online as if you have it then when a buyer like me buys it
He buys it from the third party
Like Sten's or rotary or one of those other parts or MTD or something like that, right?
And then when he gets it in the mail
He sends it to you or he may give the address like my address
First for Sten's or whoever to send it directly from me. So he's like becoming the middleman of the transaction. Well
The reason why it's gonna take two weeks was because of that reason remember I said, why does it take two weeks to get here?
Right. Well, that's why because he's a drop shipper is what it is
So that's not really desirable because you have to wait two weeks
So anyway, I look at the notification right and now it says April 15th. I'm like what?
Incredible. So I says to the guy. Hey, what's the story?
He's like, oh, it's back ordered from MTV and I'm like, I thought you had it in hand
Well, if you don't have it in hand, what do you have the balls to sell it on eBay for you?
Don't I mean so I canceled the order because it's not gonna be ready until April. It's ridiculous. So today I'm gonna fix this
Now when I mean fix it I
Mean this because I use this to blow snow past couple of days. It is now very cold and
also a
Lot of ice
So before when I tried to turn this right the ice
Was on there and it wouldn't turn as a result this thing kind of slipped a little you know what I mean?
So I think what I'm gonna do is
I'm gonna remove this jigging look to it. You know the two hose clamps and the fuel line that
Adheres this part of the rod to this threaded bolt here
I'm gonna find some kind of sleeve and then tack weld it so that it's more solid
And then since this bolt really shouldn't this nut shouldn't even really be there. I don't even know why it's there
I don't think I need it. I think it's because of it used to be a brake
Rod, you know so that there was like a lever here that would stop it, you know
And then you could adjust the the play, you know
But I think I might try to remove this since I really don't need it, you know, at least try to remove it
So I'm gonna try to get my welder out. It's buried in the back of my garage
It's gonna be quite a task even to get that out when I get that out
I'm gonna find a sleeve and try to adhere this to that without this mess over here
Then if I successfully do that
I'm gonna put some kind of a black coping covering over here to make it look less ugly
You know what? I mean? So I have to do that because like I said
The parts won't be available until April. So I'm only gun. I'm not gonna charge
Mike's friend for the rod only the labor and the fabrication
So I just dug out my welder from the corner
sucked
So difficult to get out taking up this cotter pin to release this bar
There we go
bar comes off
Just like that
I'm gonna remove this stuff try to find some kind of metal sleeve and then plug in my welder quick update on my
desulphator cycle number six
Getting a little tired of doing this to be honest with you. I think I'm gonna pretty much
Shut this whole idea down because I just don't think it's gonna work. So look we just
Trickle charge this battery overnight. Let's take a look real quick and do it faster. It's twelve point seven nine. Okay
Now we're gonna put the desulphator on here and
Have it pulse until the battery is drained again. See if we get any better results
Cell next 12 volts and then it should start pulsing
After it does its cycle of pulsing I
Would like it to be around 11 or 12 volt area, you know, because I've gotten
three five six down the four
you know, who knows if this is really working, but
Six different battery charges already on this thing. So I don't know
Also my neighbor from down the street he had a pool on chainsaw
He was using it to cut
Free wood from his arborist. I don't have an arborist. Anyway, this is a pool on
2250
22 cubic inch chainsaw
He says the gas lines were done ski
So I being the good neighbor that I am gave him my supply of
Primer bulbs and
You know, you need one of these things to pull it out whatever and
That's what she said
And so he had it for a couple weeks and he returned it yesterday and said I didn't have time to do it
I'm not gonna do it
You can have the chainsaw he went and bought a new one, you know, that's the thing people
Don't have the patience to do it. Don't have the time to do it. We'll just go and buy another one
So he gave me the chainsaw. So
Another project coming up soon is getting this chainsaw going. I
Removed the hose clamps and got rid of the fuel line. I found a sleeve for it sorta
It'll work it'll be better than the hose clamps and I'm just trying to remove this nut because we don't really need it on here
Of course, Andy just Andy the Brits from across the streets came over and talked to me for an hour and a half
Talking about stupid stuff, whatever
So I'm behind schedule now
Okay, so I removed the bolt looks a lot better now on the other side I have this sleeve that I found
Bang that in there. So one side is good, right? The other side though is
Not so good. I should tell you why and as soon as I find it that I do with it
It's a little big so I have to center it perfectly right and
Then fill it with some flux
I'll have to
Hold that there or something while I put a tack
Just so I can center it
So, there you go
Mounted my new rod. It ain't pretty over here. But like I said, I'm not a welder. That's pretty good though
It's nice and solid on that bolt
So now I'm gonna take this
black
Cut it to length
Slip it over here. So at least it looks better, you know covering up the
rod itself
With some black utility plastic sheathing is what I guess it is for wiring harnesses
So that it makes it look a little better. This is a fat part over here, but that's okay
Get a couple of zip ties for each end or electrical tape, whichever
It'll work out
That's much better, huh?
Mm-hmm. Yeah, I don't do cool
There we go
all fixed
There we go
all fixed
Mike when you're what if you're watching
Come by anytime and pick it up
Your friend snowblower is all set
So there we go
My fabricated rod is now complete after welding two pieces together
Covering it up with the sheathing and now we fabricated a directional chute rod all from just scrap metal
Let's start this baby up on and see how it runs
We replaced the carburetor with a used one, but it looks pretty clean
Let's do a cold start. Today's 28 degrees
full throttle
Prime it a little bit
See how it runs
So
Sometimes the gas could be a little old. So we're putting a little bit of fresh gas in here
that's plenty and
then we're gonna add a little bit of
Seafoam engine treatment to it
so lubricate the Jets maybe clear out some of the gum and
Just a little bit
Two or three ounces
We'll let it run for a little bit see if it helps the engine run a little bit better
Clear up some of the gum maybe rejuvenate the old gas
It's in there with a little bit of mixed fresh gas. See how it runs after we run it for a while
That's the repair on the new
Directional chute rod that I fabricated now this thing's ready to work for the winter
Put a little bit of seafoam to fix that surging only took about five minutes and a little bit of gas
Thanks a lot for joining me on today's episode. We'll see you guys next time on mowers and blowers
Hey guys boba and I want to thank you for all the support of mowers and blowers if you'd like
Make a short video clip like these
And I'll put it as an outro my future videos
Fearless DJW here and we'll see you next time on
Hey you guys enjoyed the video remember to give me a like also comment below
Subscribe
Remember it doesn't cost anything to subscribe. It's free right also
Hit that little bell that way you'll get post notifications whenever there's a new video, and you won't miss out on any of them
Remember to follow my Instagram and Facebook as well as if you'd like to donate a dollar or two
Paypal.me slash mowers and blowers really appreciate all the support also to keep the videos coming every day
Support the channel