Hey guys, how you doing? It's Henry and mowers and blowers. Good morning
Beautiful day today. I mean beautiful. Yes. There's a few clouds in the sky. I just pinched a nerve
That's uh never happened on video before I was so excited about the inter
Introduction and I moved my head too fast and I pinched a nerve in my neck, you know
a
big jolt of like pain and heat
Went up the nerve right around my left part of the head here. Oh
Man, I can't even move it. I
May not be able to do anything for like three days a week. Maybe I can't move my neck. Oh
Glad you guys saw that on video and it's a lesson to you not to move your head too quickly
Anyway
That's a new one, huh, I got up today with the intention of
Doing something that's completely different from what I've been doing this past couple of weeks
As you know yesterday I finished up my last project pile push mower that Toro
Recycler with the Tecumseh engine on it couldn't believe it
I thought that was gonna take me a while to get it going
But I was very surprised that you know
It started on the first pull if you can believe it and the carburetor wasn't dirty at all
you know not much at all, but
It did have some water in it
Which allowed it to run a little bit rough because water never gets extracted from there unless you take the bowl nut out
Drain all the moisture from inside of the bowl
To extract the water
It really isn't too hard because if you have water in the gas tank, right the water is gonna be at the very bottom of the
tank
So that that will be the first water that trickles into the carburetor bowl
If you wanted to attract it take the bolt out and drain it, you know
And that's how you get the water out. But more times than not you'll see some moisture in there
Anyway, so that you know other than you know, changing the wheels getting a couple of cables fixing the handle
Didn't really do too much carburetor work to it, you know, and that thing now runs pretty well for it to come sit
You know what? I mean? Anyway, so I'm done with push mowers
I don't have any more until I find some on the street or some of the subscriber or
Part of my squad gives me one, you know, but I don't have any more
So I have five mowers in my garage all fixed and ready to sell. The only thing I have left now are three
Tractors without engines, which I'm not ready to do yet
I'm not ready to do yet. You know, it's just too hot to be working on a
Long-term project like that tractors. I haven't had much luck with tractors
It takes me at least like you saw with that scots by John Deere eight episodes to get it going, you know
Still haven't sold it yet because I haven't dropped my price still listed at 775. I know it's high
Nobody's gonna want to buy it right now in the middle of mowing season either
so
The reason why you're all back here with me in my backyard
the side of my backyard
is that uh
When I had time and I have time now because i'm not ready to work on these, uh lawn tractors yet
But I would like to eventually sell
my rodimus prime
For those of you new to the channel rodimus prime is an mtd yard machines. It's made up of about
Three or four different tractor parts to to make it into what it is today
Uh, it's a different hood from what it was
A lot of other parts are from other mtd parts
anyway
maybe I this has been sitting here for a couple of years now and uh
It's a four-wheel steering tractor, which is the reason why I haven't sold it yet because um
Honestly, you can't see really too many four-wheel steering tractors out there aside from the brand the new
John deere ones, you know, and they're like two three thousand dollars, you know what I mean?
So I thought it would be kind of unique to keep one. That's four-wheel steering
but being that
I've had so many projects hundreds in the past couple of years that I really have just let this die
You know what? I mean?
And uh, I figure i'd get rid of it eventually
But I what I wanted to do was that I I wanted this utility rack I kind of like it
I think it's cool, you know and uh
I'm gonna take this utility rack off and paint it white and put it on my blue bayou tractor
You know the tractor with the snow plow
I mean, I just love that thing. You know what I mean? Um
It's the gt6000 craftsman garden tractor actually and it's a really nice tractor. It's got a vanguard horizontal shaft
Uh 16 horsepower v twin engine in it
just
Runs great, you know runs fantastic. Um
I had another gt6000
It's called jamal. I'll attack you guys know that project too. That also is a nice tractor
I sold that recently for 600 bucks. I just needed it out of my garage because at a 46 inch deck
My my doors you couldn't even get it in the backyard 46 inches, you know, that's 42 inches
That's the most I can get a tractor in here so I got rid of it. I knew I was never going to use it
You know
It was a nice tractor though. Uh engine sounded really mean it had a kohler v twin in it. Uh, 20
20 horsepower 20.5 I think so. Anyway, I wanted to take this. Uh
Trying to get through this, uh neck thing man, I mean burning right here can't even move my neck
You guys have ever pinched a nerve in your neck all of a sudden like that. You know what I mean?
You won't it's like you can't even carry your head on your neck, you know what I mean?
Like the weight of it. You can't even turn it. It feels like that right now
But uh, i'll soldier on for you guys
Uh, so i'm gonna take this off. It doesn't look like it's really hard
I forget how I put it on but i'm gonna take this off paint it white eventually
And I want to put this on the blue bayou
Whether the front or the back, you know, like those utility atvs
Anyway, and I also wanted to get rid of my husk verna this husk verna does not have a deck
Which is preventing me from selling it because it's nothing but a hauler like a golf cart if you will
But it does have
A really good briggs vanguard. Uh
23 horsepower, I think
um
v twin in it, I mean
The baddest engine of all time if you ask me the vanguards are great engines and for it to be a whopping 23 horsepower
I mean that thing should fetch 300 all the other put it this way
If somebody would give me 400 for this hauler just for the engine i'd sell it
Because you could sell the engine for three four hundred dollars. You know what I mean?
Maybe anyway, so I like this roof
I've always liked the roof
I pictured me painting the top of the roof white to match
The utility rack
To match the white contrast on the blue bayou
So i'm going to try to um with my neck problem right now remove the utility rack and the roof
Bring it to the garage somehow
And then the next episode i'm going to try to fabricate this to fit
The reason why I didn't do before because the way this is shaped and stuff the design of the frame
It doesn't coincide with the blue bayou. It's completely different a lot of bending and stuff like that
Not to mention the fact that the gas tank is in the back too of the blue bayou
So the drill holes where the gas tank is
Probably not a good idea. I might even consider doing some weldage
Weldage
As you can see here. This is the uh frame to the roof
And it's only attached to this tractor in the front
and um
four bolts
Two of which are inside the springs for the seat
looks like
half inch
And it doesn't look like there's anything on the bottom
Ooh
If all four was going to be that easy, it'd be fantastic
I'm pretty sure there's going to be another nut on the other side and if there is how on earth am I going to get to it?
Ooh
There isn't it's threaded into the body. Well, that was easy
I just jinxed it because I haven't done it yet
Nice
How about that, okay look
Oh
my neck
Now we got the back off
The front is just being held like right there. So i'm going to see if I can take that off
And then this whole roof
Assembly will come off
And then i'll figure out in another episode soon
How to fabricate this
Into fitting onto my blue bayou
Also, i'll probably get your input as to where I should put this
Thing here. I believe I need 7 16ths to get the bolts off of that
Which means i'll have to go to my garage to get it
And now i'm going to put the uh
spring back
into this
Okay
The label back here says not for sale in california
That's kind of discriminatory, isn't it?
I guess it's because of their uh pollution laws over there
with the big um
v-twin
Picks up a lot of gas a lot of exhaust
So i've uh put the spring back on here
I do this there's a wheel in the way
I might need to go get a
Ratchet okay, that's one and here's two
Oh
Underneath here this this paint job used to be green
It's all rusting
Pretty badly down there
But you know, I I have neglected it for about a year two years. It's been sitting here, you know
Wasting away. It's a shame
I like it, but it doesn't really mow very well. So I know I don't use it as on a regular basis
I was hoping to get another mtd deck eventually so it mows well
So here it is
My uh roof and my utility rack i'm going to paint them both white this for sure all white
And this just the top
White reflects sunlight upwards so
um
In the summer it'll keep it cold but the blue bayou is meant for the winter, you know what I mean?
um
but I could see the
From the top I could see the frame of the roof. So i'd rather not see it. It's translucent. You can see through it
So i'd rather just have it white so it matches the wheels
of the rodimus prime
I'm gonna lay some stuff down in the garage
And we're just gonna go over it. I've got a couple of cans of
A quick color 98 cent gloss white i'm just gonna use that up cover this cover that
Uh
It's no longer 98 cents
It's a dollar 38 now at home depot. I guess home depot executive watch my uh videos and say
Hey, 98 cents is too cheap, man
Guys like henry are buying those cans up like crazy for 98 cents
We gotta raise it to a dollar 38. Oh those
Bastards making 33 percent more
Preposterous, so I think i'm in pretty good shape
an eighth of a can of white
This is like two thirds of a can
and here I have about
A third of a can of rostoleum. This is the better stuff. Actually the very good stuff, right? I'm going to use this
to try to get as much of this paint onto here because this is going to be
You know kind of more important. It's more in view more used
Whereas the roof who can see the roof, you know, I just need a light coating on the roof
Which i'll probably use these I hope I can make it through this with just that so we'll see what happens
I'm gonna go sparingly
Because I don't have that much
I'm gonna try to pick this up
Make room for the roof
sun dry it
So this 98 cent white quick color is terrible
Hardly any coverage at all as you saw from time lapse
I mean no matter how many times you go over it, right?
It wouldn't cover it. You know what? I mean?
It's crap. The black is much better when it comes to the cheap paint
But this takes this will probably take five to ten cans just to cover it up, you know
So basically I just used up the can just to give it a hue of white. You know what I mean?
Better than nothing, uh, and it covers up the translucidity of the roof a little
Anyway, I have like a eighth of a can here. I'll save it for some day that I might need it
You know what? I mean in the meantime, i'll take this out and put it in the sun
As you can see over here
I tried to go several coats because it's almost vertical at an angle started to drip a little bit. It wouldn't coat it
This is almost dry. So i'm not too worried about it
This one came out. Okay
Uh, it still needs to be flipped upside down
And gone over again. Maybe i'll use that eighth of a can remaining just to cover it up
So while I wait for paint to dry by the way, my neck is feeling better already i'm a fast healer
uh
These are the two most recent ones that I just fixed
I'm gonna take the bags off and i'm gonna use them both to mow my front and back lawn
Because it has a full tank of gas in each i've poured too much
So I at least want to try it out
See if it runs for a good amount of time
I think i'm gonna use this one first because I fixed this one earlier. This is the um
allen, uh mower from melville
Thanks a lot allen for the donation to the channel really appreciate it
Also shout out to matt feeder from angola, new york for buying all four
Of my remaining mowers and blowers stickers
Uh, as you guys know the long bumper sticker and the og types are all gone sold out
All I have is the dunski sticker. How do you not want a dunski sticker?
uh the stainless steel one
The camouflage one and the american flag one
Those are the only four stickers that I have left in inventory and i'll be thinking of some new designs in the near future
But I have to get rid of the old ones first that way it doesn't clutter my entire list of stickers
It's only five dollars a piece fellas. You can buy them on ebay. Just search on ebay mowers blowers sticker
And they're all holographic, you know, so they have a nice glimmering shine to it in the sun
And uh, if you're a fan of mowers and blowers, you should have a sticker on your toolbox
Help support the channel
Buy a sticker
Okay, here's a test. I've got about a half a tank of gassage in here
gas age
See if it starts
It's sitting in my garage for about three days
So
So there you go
no problems
very smooth
It was very easy to mow my lawn because of the self-propulsion
And uh, it's a 22 inch so I kind of feel like I didn't make as many passes as let's say a 20 inch
Even though it's just a two inch difference
Went diagonally on the other direction as you guys probably know you landscapers and stuff
straight one week
Alternate the straight the other week
Go horizontal another week then diagonal another week then diagonal the other side another week this way it lets the uh grass
Stick up get more sunlight in between the blades
for a more even grow
At least that's what they tell me and it seems to work. My lawn hasn't looked this good in two three years
Anyway, that's my video for today. Stay tuned for when I try to install the painted roof and utility rack
That I stole from the rodimus prime and the husqvarna for my blue bayou
upgrade project if you will
See you guys next time on mowers and blowers
Because the ups guy screwed this up
I'm gonna see you next time on mowers and blowers
Hey, you guys enjoyed the video. Remember to give me a like also
comment below
Subscribe
Remember, it doesn't cost anything to subscribe. It's free, right?
also
Hit that little bell that way you'll get post notifications whenever there's a new video and you won't miss out on any of them
Remember to follow my instagram and facebook as well as if you'd like to donate a dollar or two
Paypal.me slash mowers and blowers really appreciate all the support
Also to keep the videos coming every day
Support the channel. Bye