AUFERO LASER 1 - Unboxing, pruebas y Review de grabadora laser para madera, metal y mucho más...

The Crazy Channel
3 followers
Aug 20, 2023
hello maniacs today we release the first review
of the channel. The Aufero Laser 1 recorder. Let's see what it's all about
We start with the unboxing as you can see it comes with instructions that are basically
some QR codes to download the manual and some sample videos. We will put the
links to everything in the description. As you can see, it comes very well packaged in polystyrene
to ensure that everything arrives in good condition. There is that this type of product requires
a minimum knowledge of mechanics, as they do not come fully assembled
but we will have to assemble some parts. This allows the prices to be quite competitive.
because making them much friendlier would require higher manufacturing costs.
This model comes with three different modules for different engraving and cutting techniques
different materials. We can engrave or cut paper, cardboard, wood, stone, leather, or even
metals. I don't think you can cut metal, but you can certainly engrave it. And finally we have
the complete structure with two axes of freedom
Here you have the different pieces for its assembly. This is the most recommended module
to make engravings, since it has enough precision and comes with a magnetic coupling
This module is more suitable for cutting as we will see below.
It comes with a coupling to apply air with an external air with an external device.
We have connected it to our air compressor. Finally, this module is the one that is
capable of engraving with greater precision, for really detailed engravings.
Glasses are essential while operating the laser. because if we were to be hit directly in the eyes, the
unprotected eyes could seriously damage us. We also have a pouch with extra accessories
whose assembly is partially explained in the manual and it must be recognized that even without
ving handyman, you will be able to assemble them easily. Before doing anything with the
engraving machine, we recommend to make a calibration with a piece of wood like this. With this
check by eye that the main axis is not tilted either up or down with respect to the
horizontal and we have to make sure that is parallel to the table. To start making
test, we will attach the most accurate module to this orange protector.
We imagine that it reduces the risk of looking at the the laser without the protection of goggles.
It is quite simple to attach and then we only have to install the module on the shaft of the machine.
We connect the power supply to the module and then connect this
small ground to one of the screws by loosening it a little.
First we will connect the power supply to the Aufero Laser 1 and then connect via USB to a computer.
Automatically the application Lightburn, with which we have made
tests, detects the device without any problems.
Now we are going to install the laser on a a platform although here we have
missed a little these pieces that didn't come with the laser and that would have been
essential to fix it to the table. It is not serious, but it would have been nice if
they were included, as it is advisable to have the laser fixed to a platform
We tighten all the screws on the plate we have made and that's it,
we have our recorder ready to start working.
We reconnect the machine and we will create our first
work that is going to be drawing some guidelines to begin to understand how to
translate the screen coordinates into the real world. We will use this part to
calibrate the height at which this laser has to be positioned and we put the machine to work...
In just a few seconds the laser creates these lines that are impressively
sharp and perfect. For a first test, it has left us quite impressed.
We are now ready to start with real engravings. To start with we will take the logo of
our channel and we will engrave it on one of the wooden plates that come as an example. We will use
the parameters recommended by Aufero for this type of material and we return to
calibrating the laser height to take into account the the thickness of the sheet metal.
We place the plate at the beginning of our coordinates that we have already engraved, and print.
The result is very attractive. The design was not optimized for drawing alone
the lines because the logo had fill colors, but you can see the potential of the laser perfectly.
Now we are going to try another logo and this time we will engrave it on a small plate of
metal. To prepare it, we have previously painted a plate with a black permanent marker, as we have
is necessary so that the laser does not bounce off the metal. The process of engraving on metal is
and it takes a few minutes to print it out. It should be noted that the speed
The printing speed is somewhat adjustable and often has an impact on the on the intensity of the engraving.
As you can see, it's over and here comes the, for us, biggest problem of the device and it is
that we have not been able to perfectly center the design inside the plate, something that seemed to us to be a
little frustrating for quite a few attempts. This is not really a problem with the machine itself,
but of the program. We had a hard time understanding how that part of the program worked,
since these applications are a little bit...hard for what we are used to and what we have to do
many tests until you fully understand what you will get by checking a checkbox here or by
changing one parameter to a different one... and now let's go with another one of the heads that
is the one that allows cutting. For this test we will mount the module that allows to inject
air directly into the laser output to prevent the cut material from catching fire.
We have an air compressor that we we connect directly to the pipe and
that comes with a valve to control the air flow to the tip.
We place the cutting module
and place the wood on some nuts. We calibrate the height again and start...
Cutting on a piece of plywood. We made several tests before we discovered that for
cutting this type of material we needed at least 2 passes. To make sure, in this last shot we selected
3 passes and then we could see that at last the laser finally went all the way through the wood, leaving some
very well-defined puzzle pieces, although a bit burnt at the edges for our taste.
Surely playing with the parameters will give a much more elegant result. Of course, the
air is essential, as the smoke generated even with air was considerable.
Finally we decided to make a print of the Lord of the Rings map on a piece of leather.
We placed a piece of leather on top of the platform with double-sided adhesive tape to make it fit the platform...
...without reliefs and we started to print... As the drawing was complex, the process took a long time.
about 50 minutes but the end result was interesting, although I'm sure that with more tests and
other of the modules would surely give us a finer and more interesting finish, since we were finding it very difficult to
read the letters. Well, without a doubt, this recorder recorder has been very attractive for its price.
It is relatively small, comes with different modules very versatile and we find it very interesting
to make engravings in metal pieces, to make key rings or just for simply geeky things like the map.
However, like all these machines, it requires a lot of trial and error process until
you get to start to understand how their parameters work and then you can get really good results.
We especially had a hard time getting to understand how the coordinates worked, as we had to
do a lot of tests where the design was completely off-center. But finally
we get the hang of it and we already know how to get the most out of it. If you are interested in
this kind of projects, Aufero Laser 1 is a good model to start with and its price depends on
the number of modules you want to include, making it a very good option to get into
this world. And well, we hope you liked this review. You know, give it a like and
subscribe if you find it interesting and turn on the bell. See you in the next video!
