ENERGÍA GRATIS con imanes y un ALTERNADOR - Respondiendo preguntas 2 | Liberty Engine #3

The Crazy Channel
3 followers
13 Video Views·Aug 24, 2023
We bring you a new section of our infinite energy motors tests and answers, which we will now call Liberty Engines. Our goal is to unleash this technology so everyone has free energy. Table of Contents:
00:00 Liberty Engine. Free energy for the world
00:16 Change the wooden base for a transparent base
02:12 Connect the motor directly to 220v
05:46 Is there a hidden battery in the socket?
07:52 What are the specifications of the magnet?
08:56 How long will the engine run?
10:18 How to get 110v?
10:45 Does it get hot or turn off when connected to high load?
23:15 Is there a hidden battery in the black motor?
Demonstrations and questions. Part 2
This video has subtitles in all languages
1. Change the wooden base for a transparent one
In this video we are going to respond to your comments, and the most repeated has been without a doubt that
we change the wooden base for a transparent one to show that there were no hidden batteries. With
this new acrylic base you can see below how this cable goes from the alternator to the base of the
plug. Although we have already explained it to you in other videos, we are going to review again how it works. This
alternator modified to be a high-efficiency generator, by inducing an initial movement
with a cable by pulling, it begins to rotate and generates a voltage that is injected into the
socket base from which this 220-volt motor will be fed through this cable connected to
the connection box of the motor. When the motor is powered, by means of the belt connected to the
pulleys, it will begin to rotate, feeding back the generator. In this way the generator generates
up to 10 kilowatts of maximum power thanks to the fact that we have previously modified it with a
very specific magnet configuration. For this generator, those 10 kilowatts are more than
enough to keep moving the engine and to power more electrical appliances. In this
way we have an engine of infinite energy. As we see in the base there is no type of battery.
We are going to show it to you from all angles so that you can see that there is nothing hidden anywhere.
You can see here, between the cracks of the different components that there are no
cables coming out anywhere, or anything strange.
Stay and watch the rest of the video because we are going to continue showing
the interiors of the components and much more about this engine.
2. Connect the motor directly to 220v
Another of your most popular requests has been that we do various tests with
the motor, since in the assembly video we did not give many details
about it, and we did not show it inside. As always, many thought that it had
a trick, so many of you asked us to connect it directly to the current.
Here you can see that if we connect the motor plug to a voltmeter, no voltage is detected,
and if we connect it to the electrical network, it turns on as any motor would.
As you can see now, here we connect the motor directly to our
220-volt socket outlet. In this way you will verify that the motor
does not have hidden batteries internally, and that it is simply a normal motor.
Now we are going to start it as usual with this cable
that we will first wind on the alternator shaft.
Throughout the video we will intersperse several
uncut shots recorded with a smartphone so that you can see the scene from various angles,
and thus the skeptics can see that there are no cables anywhere.
We are also going to measure the voltage directly at the alternator...
and as you can see the voltage is constant.
If we measure at the motor we get the same reading. By the way, many also said
that there was a battery hidden in the connection box of the motor, and here you see it open.
Now, with the power strip off, we see that there is no voltage to the engine or
alternator. Both in the plug and directly in the cables coming out
of the motor. If we had had a battery hidden inside the alternator
or the motor or the strip, it would be visible when measuring, and as you can see there is no voltage.
3. There are hidden batteries in the power strip
Another of your doubts is about the power strip, where
you also say that there could be hidden batteries.
We are going to open everything that we can open, which is only a part because this strip has
security screws that prevent it from being completely disassembled. As you can see, the motor plug has no voltage.
Now we remove the cover of the terminal strip of this socket base,
and check with the voltmeter.
As you can see there is zero volts.
Now we press the button so that it turns on and we measure again.
As you can see there is still no voltage when directly measuring the
connections, which shows that there are no batteries inside.
In any case, we doubt that we could hide such small batteries in that
strip, and above all that they could power all the tests that we do in these videos.
In fact you have a test of two hours later in this same video.
We reassemble the strip and leave it firmly in place.
4. What are the specifications of the magnets?
The famous neodymium magnets, which you keep asking about, are
part of the industrial secret that protects the patent that we talked about in the
previous video. Precisely in order not to violate that patent, we cannot yet reveal the
exact specifications of the magnets. But we can clearly show you what they are like.
It is a magnet that has a curvature below that perfectly adapts to the
circumference of the generator rotor and mates perfectly with the coils.
We cannot say the exact dimensions, nor the amount of gauss, nor the curvature.
We cannot reveal it yet, and we will do so until we reach the goal of visits to
guarantee our protection. The key to this engine is in the relationship between the magnets and the
alternator, and one other hidden detail. We don't recommend trying to build it yourself
until we reveal all the details, as it almost certainly won't work.
You have more information about this in the two-hour video, where we explain this in more detail.
5. How long would the engine run?
Another of your frequently asked questions is how long the engine can last on.
It could power devices for many hours. According to our estimates, the
engine can be kept running indefinitely as long as we take into
account the necessary maintenance that must be carried out, which is every
six months as we said in the other video: Change the bearings and the toothed belt.
For those of you who want to clear up any doubts, we have prepared a two-hour recording
in which we will put the engine running for that entire time, and we will connect all kinds
of devices. We recommend you watch it because we will also tell you many more secrets
and curiosities about the history behind this engine, the patents, the specific characteristics
of the engine, and even what problems it has when using it in a city. We leave you the link
above so you can see it directly, or you can also find the link in the
description of this video, or directly browsing the videos on our channel.
6. How to get 110v for Latin America or USA?
The way we have the engine set up with this modified generator, you can only
get 240 volts. In order to obtain 120 volts with this same configuration
, we would need a transformer from 220 volts to 110 volts. However,
in a future video we will manufacture a new device in which we will have different
output voltages, including 120 volts for American consumption.
7. Connect a high load to see if it turns off or heats up
Many of you ask about the capacity that the device can support, or if it
suffers from heating. To verify this you have, on the one hand, the test of
the two hours that we have taught you before, and on the other hand we are going to do in
this video also a small demonstration of charging and heating, taking the opportunity to
show you in hot the internal wiring of the motor that later We will open inside.
Throughout this video we are going to record several times like this with the smartphone so that you can see all the
possible angles and that you can see that there are no strange cables and that there are no strange things anywhere.
While we wind the cable to start the device we will answer the question of
the load. This device will never turn off when connecting a big load. What could happen
is that the generator winding burns out and it will stop working. For this reason we are
never going to connect an excessive load, because we do not want the device to burn out.
In future projects we will create larger motors that can withstand a higher load.
Here as you can see, the engine has not started, and we forgot to connect the power strip. Without the
power strip on, the current is not transmitted from the generator to the motor, and the circuit is cut.
We have left the recording because we think it shows once again that the system works as we say.
We are winding the rope again, and we promise you that this will be the last time we will show
the complete process of winding it. For future videos we'll replace the rope
with something faster, or just speed up the video at those points.
Now we don't do it just so you can see that there are no editing tricks anywhere.
For those who always try to find the trick, that black that you see behind there does not
hide cables of any kind. It's just a tripod leg to hold the
black cloth behind it. We couldn't make it less visible. In some of the sweeps with
the smartphone you can easily see that it is a leg like the other tripods for spotlights that we have.
Now we are going to connect a grinder, which is something that requires a lot of power. So
you can see that with the transparent base and with everything much more visible, it continues to work properly.
As you can see we are turning it on and off without being connected to the power strip so you
can see that it does not turn on by itself, that it does not run on internal batteries or anything like that.
As you can see, the grinder is disconnected when unplugging it from the machine because it does not have internal batteries of
any kind. In addition, we have shown you in this shot the "Liberty Engine" from all possible angles
so that you can see that there are no hidden cables or tricks of any kind hidden there.
Temperature-wise, this machine gets a little warm but not overheated
. It can reach a maximum temperature of about 50 degrees so you can
touch it with your hand and you won't get burned. But there does not pass. It does not take more temperature.
As we have said before, if more load is connected to it than it can withstand,
the internal winding would suddenly burn and then it would get very hot. But
working with its normal workload it never gets a considerable temperature.
Now we are going to remove the black engine cover, which many said could hide
batteries. And as you can see, inside that box there is only the motor wiring.
We are going to put the voltmeter directly so that you can see that it does indeed have a voltage.
Finally, I know that many of you wanted us to walk again with the engine in our arms with the
transparent plate. The problem is that the board is a bit thin, and when lifting the motor,
it bends slightly and the belt tension is lost, making everything unstable.
8. Batteries are hidden in the black motor
The other place we get accused of hiding batteries that power the
system is in the black motor. Here you will see how we disassemble it without cuts.
To do this we will first carefully uninstall the motor from the acrylic plate.
Now we are going to disassemble the pulley to be able to see the inside of the motor.
We'll remove the cover right here.
As you can see, there's nothing unusual inside the engine either. It is a normal engine with nothing
camouflaged or hidden. Also, as you have seen in the first part
of this video, it does not work by itself. If we connect it to a power outlet without
further ado, it starts. But if not, it doesn't move if it doesn't get power from the alternator.
Finally we are going to open the cover of the connection box, and as you can see, inside
we only have the connections of the motor itself. What we have next to the
cylindrical-shaped connection cover is the starting capacitor for this
single-phase motor. As you will understand, there are not enough batteries in there to power
this system for two hours connecting things like in the long video we have made.
Well, if you've come this far without seeing the previous videos, we invite you to stop
by our channel and see the rest. You have a video with the complete construction of the engine, and a video
with questions and answers. Also, if you are interested in learning more about this project, we
invite you to watch the video of the duration test with the two hours in which we
we have hidden an important part of the details necessary to make it work,
SUBSCRIBE give this video a LIKE and see you in the next "Hidden Technology"
