Reinforced Springback Sewing Revisited // Adventures in Bookbinding

Sparky Deal
161 followers
Reinforced Springback Sewing Revisited // Adventures in Bookbinding
#springback #bookbinding
A few months ago, I did a video on reinforced sewing for springbacks.
This is where you sew the kettle stitches around a loop of thread.
And this is described in both Vaughan and Mason.
The resulting kettle stitch looks quite decorative, wrapping around the loop of heavy thread.
However, it doesn't match the diagram in Mason.
Vaughan doesn't have a diagram, but Mason does.
And this is it. And it looks quite different to the sewing that I just demonstrated.
Now, as a reminder as to why you might want to reinforce the kettle stitch on a springback, it's because springbacks
were often very large, sometimes massive books, and needed all the strength that you could engineer into them.
And I love this photo, so any excuse to use it.
In September, I did a workshop with Daniel Ibbett on binding springbacks.
He was taught springback binding when he was an apprentice bookbinder, and he had a different way of doing the
reinforcing of the kettle stitch.
So I'm going to demonstrate it here.
He had the loop of thread, but instead of wrapping around it, he would come out the middle of the two threads and then
wrap around the two, doing the kettle stitch as normal, and then going back between the two free ends of the
loop into the next section.
Now, what I'm demonstrating here is a simplified version of what Daniel taught us.
Daniel used a thing he called the wishbone.
And when I get down to the other end of this example block, I'll do exactly what Daniel did.
Daniel made this wishbone with a thin thread.
He used a nylon thread, but I'm using the thinnest linen thread I have, which is a 43 thread.
And I'm measuring 4 lengths, 10 inches long.
I'll straighten the 4 lengths out and line them up at one end, and then join them at each end with a simple overhand
knot. And I'm not going to pull it really tight because Daniel undoes it at the end of the sewing of the book.
Once it's joined at both ends, you fold it in half and then do another overhand knot at the bite.
And the result is something that looks like a wishbone.
Then it's a matter of sewing around the wishbone, just as I did with the other loop of thread.
So you go through, out through the middle of the wishbone, around it, do a normal kettle stitch, and then back in
between the arms of the wishbone into the next section.
The piece of grey card was me just experimenting with trying to produce a darker background so that you could see what
I was doing. So I'll do this for a number of sections so we can see what the resulting pattern looks like at the
kettle stitches.
Once done, Daniel undid the knots on either side of the kettle stitches, and then he glued the loose threads into the
lever. While I do like the wishbone and will continue to use it for a while, I am not gluing the loose ends into the
lever, because it happens to be where I trim the lever off anyway, and Daniel trims the lever differently.
So that's not an issue for him.
I'm going to continue to research this reinforcing of the kettle stitches and springbacks, and hopefully I'll find more
examples of springbacks at our local archives where the spine is exposed and there's enough that I can see variations
in reinforcing or even find some examples of this reinforced sewing.
And, of course, if anyone's got any experience with this, either from their training or having been told about it, I'd love
to hear from you. So this is the first video for 2020, so happy new year to everyone.
And it's a teaser for the first full project of the year, which is going to be another springback.
It'll be a half leather A4 size visitor's book.
The blue card's just another experiment to try and help you see the white thread against the white paper.
The resulting kettle stitches with Daniel's wishbone looks quite decorative, and I think it would be suitable for an
exposed spine binding.
Also interesting is the other end where I just used the loop of heavy thread, which looks very similar to Mason's
diagram. And thus, I think this is what Mason meant.
I hope you found this a little bit interesting, in which case, please hit the big thumbs up button.
And if you want to be notified of my future videos, such as the springback visitor's book, please hit the subscribe
button. Until next time, cheerio.
