It was bound to happen one day someone asking us to reproduce the famous "mal-lis" of the tone from a real "ton" chest they found without the "lis"
So the first thing I did was go to Syria buy a plot in F from my friend Pierre so that I could start the production
So here's what the lice look like at the baggage museum and to make the tone of the luggage
Here is the lockbox and it will work like this and it fits in there
We're not out of the woods yet
Then we started with window sash tracks and window hinges
These are the only standard parts I could find which weren't quite the right width and thickness but we'll fix that
So the first thing we do is measure these hinges that have a somewhat special size in order to cut them and so I cut them with a hacksaw
So I tested two blades the first one is a diamond blade which doesn't work it cuts very poorly
So I got back my old round records you know the ones that aren't expensive they're systematic but at least they cut really well
So once it's cut it's sanded and you have to move left-right left-right on both sides of the trunk
Then we proceed to cutting and de-barking the bed frames
So a classic cut is the base board which we will roughly cut into 40 by 40 uprights in short
It had to be done that way so I couldn't dry it in an artificial dryer so I let it rest in the workshop for about 15 days at room temperature
Knowing that it's 40 by 40 and that my goal is to make the bed as rustic as possible because you'll see the client wants me to age it once I've made the bed
So if there are cracks if there are things like that in the end it won't be a catastrophe it won't be too disturbing
Obviously for a piece of furniture you shouldn't do that
One of the main issues we had with this trunk was that you have a lot of special hinges so it had to be adapted
I'm using wardrobe hinges which we have in stock these are period hinges and I'm going to do some DIY to make double hinges
I needed to have a 42 mm spacing between each axis so I made a first cut with the saw and then I assigned it to the machine
It's done now we can weld
So they're small parts often I weld tubes or things like that or rods which I would also do for his feet and his head
But there they are small parts made from relatively thin sheet metal
So the aesthetics of the weld don't matter there since these two hinges finally there are four in total but there are two particular ones
And these two specific hinges are hidden behind small pieces of fabric which prevented the person from getting hurt
So this is original it's just like that and I have to admit it suits me well because I don't need to bother him to do amazing things
Even though in principle I tried to do them as best as possible
Okay we're in our male-bed production and on a male-bed from the early century you have some special hinges
So these are the hinges that you traditionally know
On a bed you have hinges a bit like this which I'm in the process of welding or gluing let's say because I'm not a welder
So these hinges will be attached to one side of the bed to another side of the bed and this will allow the bed to fold like that
So here there will be a thickness and there another thickness
The thickness is here and there will be the amount of the bed
So it allows for a complete fold and on the other side it comes and folds like that
So we need some special hinges and I couldn't find any suitable ones in the market so I thought the only solution is to make them
So for that I'm going to try to weld all these things together
So I got back to welding it's probably been about 10 years since I last did it so I don't remember the settings I'm having trouble adjusting my helmet
So for your information on a welding helmet there's something you need to be very careful about which is that an electronic welding helmet has a grinding position and a welding position
So be careful not to overfill and make sure to set the correct weld position when welding and grind properly when grinding
Then you can set the return time so since I do a bit of timing I set a fairly short return time
Then you can obviously adjust the sensitivity so here I set it quite high I want to protect my eyes
I'm not here to shoot my eyes out we only have two
So I use 0 8mm solid wire on a MIG MAG welder with an argon gas mix it's a JIS machine something I've had since 2017 it cost 300 bucks
This welding torch costs 300 bucks the gas tank costs 300 bucks it's like that it's kind of like an espresso it's a bit like with coffee
So I'm going to try to solder here a bit more and then I'll go back to the places where I made mistakes
Once our first cuts and my first weld were done we moved on to dry assembly testing and cutting
In fact one of the longest parts is cutting with a wood saw to precisely fit the bed's stiles to the hinge sizes since everything is made to measure
So we got some old flat head screws round ones to make it as close as possible to the original
It's quite hard to find old brass or steel screws very thick and short
If you have any leads on where to find such bolts especially old ones feel free to send me the addresses
Because cruciform bicromate screws are certainly not what you need for this kind of project
So it was necessary to take measurements on these particular double-hinged doors in order to cut the frames
It's not complicated just time
But it's a marking it looks like a tenon marking but with angled parts
So it's a little bit longer but in principle it's the same
Luckily Marc my colleague can kneel which I cannot
So that suits me well because it's more flexible
The little bird-like chirps you hear are simply Bob our 15-year-old deaf dog
And who barks regularly to remind people that he is there
It's behind us
So a small clarification the trunk is antique
The trunk is roughly from 1900
The model on which I based my work which is in the Baggage Museum dates from 1862
This is the oldest bed trunk in the world
These are trunks that were carried with ropes and cables on the sides and with bearers
And these are pieces that were actually used
The best known is the one displayed in a Parisian museum that of Saint-Vendiant-de-Brasa
The Saint-Vendiant-de-Brasa chest that opened the way to the Congo
The principle is that all the folding elements must fit into the trunk's frame
Let everything be put back in place and make sure you can add a mattress at the end
Now they had to make the bed heads Bed heads
are a flat piece followed by a round rod
For that I made mortises in the metal two small mortises in the metal
I press my small round tenon I point it directly into the mortise
Then I weld everything around to make sure my system is straight and flat
Here my little round stem which fits into a tube to hold up the bed head
So it's not a very complicated system but you have to do it because it doesn't exist in the market
Once again were lucky to have one at the baggage museum
The museum curator was annoyed as well as the museum technicians
To disassemble the antique trunk measure each piece and copy the method used in 1861
I don't think they had many welding machines back then but they forged
But the pieces are exactly the same size
I think it's just the round stems where I'm at 11mm whereas originally it must be 12mm or something like that
Nothing but small details that won't bother the person asking me to do this job
So I clarify we are definitely not in the context of counterfeiting since none of the parts we manufacture are marked with Vuitton
So we stay within the bounds of the law
The headboard and footboard I am making based on the original design are engraved with Louis Vuitton
Obviously I don't do it since you're not allowed to do that
We are in the context of a restoration
The original chest is indeed a bed chest
If I were to make a bed out of an ordinary trunk and call it a Vuitton trunk I would be involved in counterfeiting
I'm telling you this because someone asked me the question on the air du bois website and it seemed obvious to me
And it wasn't going to be available to everyone so maybe it's better to explain it
If on the other hand I engraved Louis Vuitton onto a small metal piece or a wooden one I would be breaking the law
Once the parts are welded they need to be ground and possibly compensate for any small losses that may occur
For grinding I use a grinding wheel with sandpaper and the helmet goes through the grinding process
It is sometimes discouraged by welding manufacturers to use your welding helmet for grinding as it will get damaged more quickly
In this case I didn't have another system so either I use it or I use it without reason I think it's better to use it
It's quite funny because often woodworkers don't like working with metal and metalworkers don't like working with wood
I admit that I really like working with metal I think it's quite nice because it's always precise
It's really nice to be able to do some pretty solid clean things
And I think it's not very complicated to make welds that are aesthetically acceptable without being technically perfect
Once again it's not about claiming to be a welder I think people who weld regularly will laugh at the methods
But anyway if it works off camera I tested to see if the parts I found were durable
I got up on it and it holds
It's just a matter of drilling them preparing them and now doing the wooden part I'll have to make the wooden boards
These are 8 mm boards which also need to be prepared in F
For the wooden part I simply planed some F-shaped pieces that were 40 mm thick one flat face then resawed them with a circular saw then ran them through the planer again to get the other flat face
Once the 10 mm boards are at the correct height I will run them through the thickness planer to achieve the depth or height I want
It's really just a classic panel technique that's why I don't go into too much detail there
You have lots of pros and YouTubers who show you how to do this kind of thing
You will have understood I assemble boards that allow me to make my panel the right size then I sand it
The only difficulty with something like this is the thickness When you start there are thinner thicknesses
It's always harder to be perfect than to do it in 25 mm
There we are at 10 mm so we had to use F to stay exactly in the spirit of the era
Once that's done I attached it to the metal bed frames you saw me do before
Meanwhile we started sewing hinge covers that go on the bed frame posts hidden and protecting the hinges
So that the person using the bed at the time cannot get hurt
Then they sewed the bed base that was cut upside down
A frame is placed it is nailed the bed is unfolded in the opposite direction and then the entire base is cut
For this Marie my wife made a pattern They first made the side loops then they saw the final dimensions
Here is what the bed looks like once it is finished
It fully folds into the trunk and is then completely assembled
Here it is I hope you enjoyed this video We are really happy that a client offered us the opportunity to make this piece and this case
It was really a project that we really liked which took us about one and a half to two months piece by piece
Thank you and goodbye