Hello, this is Kaiteki Art.
Today I will introduce this glass pen in detail.
This is a high-quality glass pen made by Mr. Kan Seifu.
It is made at a glass workshop called HONO in Kyoto.
Now, Mr. Kan Seiryu, the second generation, is making a glass pen.
I chose the color called Seseragi, a model called Miyabi.
It is a clean blue glass pen.
I made an introduction video before, but this time I tried shooting and editing again.
The tip of the pen has a twist from the middle.
There is a wave pattern on the pen shaft,
and the rhythm of the wave has a curve, so it is a very simple design, but it is beautiful.
I bought it at an online shop three years ago.
There is a workshop in Shirakawa, Kyoto, so you can buy it there as well.
This pen has a permanent warranty.
Even if you lose the tip of the pen, you can repair it at the workshop.
When I bought it, it came with an extra ink like this.
I've never opened it before, but I opened it this time.
There is a note like this inside.
It says, don't wash the pen, but I change a lot of ink, so I wash it after all.
There was an ink-soaked sponge inside.
I was always nervous when I put it on an ink bottle, but I'm sure it's safe.
This can be made original, so if you have an ink you use often,
I thought it would be a good idea to make a safe ink bottle yourself.
It also has a dropper, and it says that you can use it for a long time if you add it with this.
It was black ink.
It seems that there is still a loss of ink.
I use a cup like this when I wash it.
At first glance, it looks like glass, but it's actually a cup made of soft resin, not glass.
Although it is a high-quality glass pen, I am afraid that it will hit hard objects, so I recommend using a soft cup like this.
I bought this on Amazon.
I think you can see the transparency better if you add water.
The dye ink, which is often found in fountain pen inks, is very easy to dissolve in water like this, so you can remove the ink just by shaking it a little.
However, it is a little difficult to remove if it has been a while since you applied the ink.
Wipe off the water with a tissue, but if the ink still sticks to the tissue at this time, I think you should wash it again.
In this case, it seems that there was a little ink left.
I'm wiping it so that it sprays.
If it doesn't come off, I wash it with warm water or running water.
The glass pen is very beautiful when washing the ink, so I bought a cup that looks like this from the outside.
I will try writing a little this time as well.
I will use this ink that I recently bought.
It is the Ukiyo-e ink series by Tachiya Nakabayashi.
This is a color called Hokusai Koiyai.
I bought this ink to use it in the last illustration making ASMR.
It's a very nice color, and you can see it when you look at the mouth of this bottle, but when it dries, a red color comes out.
It's an easy-to-use color, but I like it because it has a slightly mysterious color.
This time, I will write on the kento paper on the drawing board.
I looked at the product description to introduce this time.
It says that if you put it on the ink once, you can draw a sheet.
I thought it would be a little longer for me, so I actually verified it this time.
I usually draw pictures because I'm not good at writing, but this time I thought I would know if I didn't write.
As expected, I was able to draw one sheet easily.
It may depend on the size of the character, but I think this is a good amount.
I'm going to move on to the second sheet.
I tend to buy pretty good glass pens, but good ones can be drawn steadily without adding ink like this.
I don't often change the ink while I'm drawing, and I only use it once for each color in the last illustration.
I think this depends on the accuracy of the pen tip and the accuracy of the groove.
The advantage of a good pen tip is that it can be used for a long time and is comfortable to write.
I used to think it was cheap, but I felt that it was a little bad to write because I sometimes scraped it.
The second sheet is also full of characters.
I also tend to buy high-quality glass pens.
High-quality glass is heat-resistant glass, but it is good for anti-magnetism, so it seems that the pen tip is hard to break or scratch.
Anyway, I think it's a hard, hard-to-break glass.
I don't think it's going to break just by writing.
I thought the character was a little thin, but I couldn't draw it like this.
If the pen tip is thin all the time, it will disappear at the end, but I can't see the character, so I can draw it cleanly.
As a result, I was able to draw two and a half sheets instead of one sheet.
This is when I actually use it in the illustration, but I can draw long lines without interruption.
In this case, the accuracy of the pen tip is poor, and when the angle changes in the middle, the thickness of the line may be interrupted, so I think it is better to buy a good one.
I'm collecting glass pens as a hobby, so I'm thinking of increasing them little by little.
I really like KANSEIFU's glass pen.
It's thin and very light, so I recommend it for everyday use.
It's not a normal way to use it, but I've used it with paint like this.
This is a paint called Fine Tech, and it says that you can use it with a glass pen for this purpose.
When I actually used it, it was a little harder to use than dye ink.
I think this depends on the viscosity of the paint, so I'd like to try various things.
It is recommended to use dye ink for glass pens.
Be careful when using dye ink, so if you use it, please take responsibility for it.
Like this.
There were times when I had to draw several times to get the ink out.
I think this is because the amount of dye is larger than the amount of dye, so it will be clogged.
Next, I used a paint that was rough.
This is a paint based on ink.
I thought the particles were fine, so I used it.
It was easier to draw than Fine Tech.
If you use a pen, you can only see the color of the existing product.
If you use a paint that you want to blend like this, I think the range of expression will expand.
It's harder to draw than water-based dye ink, but I had the impression that I could continue to draw.
I didn't re-paint it so many times.
You can draw with uniform lines like this, so it's convenient when you want to choose your own color.
Recently, I used ink.
Unlike ink paint, it contains two layers.
I was worried about the two-layer part because it was difficult to remove when it hardens, but it was easy to draw.
I think this depends on the amount of water, but it was easy to draw.
I thought about using ink, but it was hard to remove.
It's hard to remove when it's dry, and it's hard to remove when there's a gap.
I used a soft toothbrush to gently brush along the groove.
If you scratch it, the paint will get in and you won't be able to remove it.
I think you should be careful when cleaning.
I've been using this glass pen for a long time on this channel.
I made an introduction video again.
In the early videos, I used to draw with a fountain pen.
In the end, the glass pen is easier to change the ink, so I collect this one.
I would like to continue to collect glass pens and inks.
If you are interested, I would be happy if you could check out the channel again.
Thank you for watching until the end.
See you in the next video.