Wie man einen Tisch mit Intarsien macht | SWR Handwerkskunst

SWR Handwerkskunst
8 followers
2 Video Views·Mar 6, 2023
A work of art, created by nature.
Ambuina wood, inspiration and material at the same time for a table with intarsia.
I love the intarsia, on the one hand because I love wood
and because I have many beautiful woods in the intarsia on a small area.
Then with intarsia it's about finding a beautiful shape,
still keeping the wood alive.
Yes, and then simply the combination of the different woods.
The woodshed, to a certain extent the library of artist Tischler Volker Lück.
Next to the workshop, the most important place of inspiration.
Karlsruhe is one of the specialists worldwide when it comes to the restoration of
historical furniture and furniture construction. But his passion is also in intarsia.
We have about 130 types of wood here.
These are partly ancient stocks that I also took over from old carpenters.
What we are looking for here now is macassar ebony.
The point now is that I have the corresponding strength on the one hand and a nice grain,
as I imagine the whole table afterwards.
This macassar ebony comes from old approved stocks.
Now I still need bird's eyes for the footstool at the back.
Here we now see a bird's eye hawk, the sugar hawk from Canada.
There are many theories about how these little eyes, which you will see even better after carpentering,
how they were created. One theory says that they are birds that pick out the sugar syrup
and therefore there are channels that grow back and then bring the bird's eye hawk to expression.
So, that gives the footstool afterwards.
The wood is chosen, but first it is now about the construction of the table top.
A simple basis, but every work of art needs a stage on which it can unfold.
The basis for the intarsia is being prepared.
I have a beech multiplex plate here, on which I want to veneer the veneer afterwards.
And I first cut the plate square, then octagonal,
to glue the ebony or glue it in before the plate is veneered.
Volker Lück mills an edge around the table top into which he inserts massive pieces of ebony.
So, the next step is now to cut the wood so that, as already mentioned, I can glue it into the veneer here.
With the valuable wood from the Indonesian island of Sulawesi, there should be as little waste as possible.
The remains that are created during the manufacture of the table top are bought by jewellery designers.
Today, precious woods are often traded for the price of a kilo.
He cut the Makassar ebony to 22.5 degrees to be able to put it in the milled edge.
First octagonal for the round table at the end.
I love this ebony. I did my master's thesis in France as an ebonist.
And ebonist is translated into German as the art table top, but ultimately means the ebony worker.
Ebony is very heavy, has a high density and does not float.
Because normal white glue does not anchor well in the pores of the dense wood,
the art table top uses PU glue.
In addition, PU glue has another advantage, it binds faster.
And with the help of the band saw, the table top then gets its round shape.
This is a very nice device here on the band saw, a circular device.
I can now swing the center over this template into the sheet, turn it around once,
and then I have this sheet cut roughly, cleanly round.
It is time-consuming and yet only the basis for the intarsia work.
The suitable noble veneer can be found in the art table in his treasure chamber.
Yes, we are here in my veneer warehouse.
You can see a huge amount.
I have about 100, 120, 130 different types of veneer or variations.
I don't know exactly.
Here, especially in the area, we have my dark woods, my ebony woods above all.
And I decided to make the outer rim in ebony on the table,
because I just want to work with a strong contrast.
But on the search, for example, I stumbled across my white ebony,
which I would infinitely like to see on the table.
But the contrast is not strong enough for me.
But when you see that, it's a dream as a veneer.
You have to imagine what it will look like when you fold it up,
you can make infinitely beautiful furniture out of it.
I am now cutting the eight segments here, which I will later lay around the outside as a frieze.
Here you can of course see that the ebony is very, very hard.
The saw is super sharpened, but you can't sweat there.
The gratings of the veneer are supposed to absorb each other
and create a harmonious overall picture again.
Putting the cut individual pieces together like this is like a puzzle.
The segments are glued together by the artisan with water-soluble joint paper.
When everything is veneered, Volker Lück can peel it off again.
The joints are glued together so that the wood no longer slips
and can be cut in a later step.
The ebony will later be glued to the underside with the table.
That's why the gratings don't have to fit exactly here.
This is the underside, but now you can see it without paper.
And once again back to the favorite place of the artisan.
In his treasure chamber, he chooses the Ambuina Maser veneer for the insertion work.
Yes, here we are now with me in the part that is mainly dedicated to the Maser veneers.
Maser are buds that everyone may have seen on the tree before.
And when they are cut open afterwards, what is actually a small branch on the outside is
then a turbulence in the wood.
And here we have, for example, a wood that pretty much everyone could have seen before,
just didn't know that there was something beautiful in there.
This is a very ordinary poplar Maser.
You often find it on rivers that the poplars have such large buds and
lots of small branches look out of the buds.
When I take them and cut them open, I have such a beautiful picture.
But I went down here to the shed for the Ambuina Maser, which I combine with the poplar.
I chose this leaf.
Yes, even here, if I were to fold it up, I would already have a whole tree.
But I take this leaf to cut a quarter out here afterwards to get a round shape
between the red core and the white splint.
For me it is pure nature that comes over here and I would like to incorporate that into the table as a center.
Volker Lück decides on a round table shape for an Ambuina Maser as round as possible.
But to get a perfect circle, he works with a mirror trick.
So he knows exactly where he will cut his veneer.
And with the angle I now cut exactly a quarter out.
The Ambuina Maser veneer is much softer than plain wood, so cutting it out is also easier.
The Intarsia gives me the opportunity to express myself artistically.
In this case, expressing yourself artistically does not only mean designing something yourself,
but also having an eye to put the right piece in the right place.
To make such veneers, whole trunks or buds are cooked soft for days in huge basins.
So prepared, they come out of the basins, are clamped in machines and sawn or chiseled to very thin leaves.
I have now only drawn this circle so that I roughly have the outer diameter,
because I will now break out the masonry here.
Like a map of nature and designed by an artist.
In general, the whole thing is called Intarsia.
But more precisely, it is a marquetry.
The art carpenter therefore designs a marquetry, a veneer picture that is glued to a corpus.
Today, we also speak of Intarsia.
Strictly speaking, however, parts are lifted out of the wood base and the pieces are inserted directly into the wood.
I am now cutting exactly the contours that I drew with the pen before.
You can already tell that it is exhausting to get through the flat wood.
The master carpenter reinterprets old techniques, and yet he sees himself in a long Intarsian tradition.
I never got to know my great-grandfather, my great-great-grandfather.
But at some point we found this plate on the attic.
And that is a part of the masterpiece of my great-grandfather.
He was a carpenter himself.
We have different Intarsias here.
These four fields, for example.
This is an Intarsia that is cut out with a saw.
All four parts and probably also the flat wood are laid on top of each other and then the contour is drawn with a very fine saw blade.
And then, in principle, you can make four times negative and four times positive by inserting black into light or light into black.
Out here we have a block Intarsia, a ribbon Intarsia.
Rosin wood is glued between two layers of veneer, i.e. a maple and again a flat wood.
And then cut into slices to make such bands.
Yes, a work in the tradition of my great-grandfather.
The art carpenter and his source of inspiration.
After years of hiking in Europe, the master's exam in France and Germany, Volker Lück is completely infatuated with natural wood.
I consciously insert one piece of wood into the other in a form that I have found.
And with this table, it is simply important to me now that this broken outer edge of the Ambuina Maser is inserted in such a way that the Ambuina Maser has grown with its small eyes.
The entire surface is glued by the art carpenter to the base and covered with cardboard.
The table top does not stick to the veneer press.
The table top rests in the press for one night and Volker Lück pulls it back to his workshop the next morning to check the result.
Here you can see very nicely how he has pressed the PU glue to these small pores, which you can hardly see, and then glued it with the cardboard.
For Volker Lück, with the most beautiful moments.
The fine-tuning reveals the unusual structure of the Intasia and releases the unique piece by piece.
So that the heavy plate will later look light, the carpenter mills the edge at an angle.
And down here you can see the flat wood that I had glued around as an octagon, and what it came down to now was that the flat wood was deep enough so that I didn't get out of the multiplex plate here at the grooves.
So I'm very happy, it worked out well. And then the plate is ready to be painted.
The varnish gives the plate hardness and creates clarity, depth and luminosity. A veneer that tells a story.
The central table leg is still missing, made of bright bird's eye ahorn, the contrast to the dark plate.
Conically cut and designed as the foundation for the table top.
In order to take up the subject, the joints on the leg are laid in addition with flat wood veneer.
And the signature of the master, the stamp, must not be missing.
Furniture with Intasias have shaped the craft of the art carpenter for centuries.
Today there are only a few furniture carpenters who bring this art to the championship.
A table with Intasias prepared by nature, completed by the carpenter.
Are you fascinated by craftsmanship just like us? Then subscribe to the channel now and don't miss an episode.
