It s a Hot One this week! We are playing with Sublimation Printing On T Shirts, Wood and Aluminum with Heat Transfer machine.
We found an Epson Artisan 1430 larger format printer in eBay. We won it for only $180, so we decided to try to do some sublimation printing. We picked up a continuous ink system that allows us to run sublimation dye through the printer.
Then we picked up a heat press with some attachments to apply the transfers to other things like mugs, cups, plates... We wanted to make sure we had all the attachments, just in case.
We even bought a bunch of poly sprays so we could try to heat transfer on to all types of materials. We sprayed it on a t-shirt, a tumbler, and a piece of scrape wood.
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
You won't believe what you can make
with a sublimation printer.
We're gonna show you what we made right now.
Hey, what's up?
Do you like do-it-yourself projects?
Do you like making things yourself?
So do we.
So join us each week for a new project.
Go ahead and hit the subscribe button.
Tick that bell to be notified of our new ones
that come out every week.
This week, we're messing around with sublimation printing.
We got a new toy off of eBay,
so we decided to try it out.
What's sublimation printing?
We had no idea what it was either,
so we did a bunch of research and bought a bunch of toys.
All right, so sublimation printing
is using heat-transfer dye, sublimation dye.
It reacts with polyesters and PVCs
to kind of embed the image inside of the polyester.
It's like a heat-transfer chemical reaction thing.
This isn't a science class.
This is a make-it class.
So it just embeds itself
into these different polyester coatings.
Now, there's two ways that you can get
your materials to print on.
There's one, you can buy it.
They're called blanks.
They have a bunch of different stuff.
This one's a blank.
It's aluminum coated in polyester.
This one, we used some spray
to coat it in a clear polyester that we found online.
And we also coated this one in a clear polyester.
This is just a regular tumbler.
We're gonna see if the spray or the blank works better.
And we also sprayed a T-shirt
that's cotton with the polyester,
and then we bought a polyester T-shirt,
and we're gonna see which one works better.
Polyester-cotton blend.
That's 60% polyester, so we're gonna see how that works.
The higher the ratio of polyester, the better it will take.
So we found this printer on eBay.
I picked it up for about 180 bucks.
It took some tinkering.
We had to clean it up, clean it out,
and add a continuous ink system
so that you can print large things
in large quantities of things using the sublimation die.
We had to add this to our printer,
and there's fake printer heads in there.
They just suck from these things.
We printed out a couple of logos.
We're gonna print the logos on things,
and then we printed out a couple of pictures.
We're gonna try to put these on things,
and we're gonna see how they look, how they come out.
All right, what are we trying first?
What do you wanna start with?
You just wanna go in for the aluminum and a picture?
Right, yes, this was pre-purchased
with sublimation coating on it, so yeah, I agree.
Yep, we ordered a dozen, basically a dollar a blank,
and they're pre-treated and everything.
So let's peel the backing off.
You got some high-heat tape to hold it in place.
What is going on here?
I get some scissors.
All right, I laid it face down.
And when we did all of our prints,
we printed everything mirrored.
So our heat press is set at 375,
and this thing said to press it at medium pressure.
There you go, I'm gonna place this face down.
All right, we ready to try it?
Let's try it.
All right, by the power of Grayskull!
How are you counting 20 seconds?
Oh, I don't know how to get the timer to go.
Start, set.
Five Mississippi, six Mississippi, seven Mississippi,
15 Mississippi, 16 Mississippi.
Let me get my foot.
17 Mississippi, 92 Mississippi.
Boop, boop, boop, boop, boop, boop, boop, boop.
All right, that's about 20, right?
Yep.
Woo!
Woo-wee!
That seems hot.
You sure you peel it off now?
Don't you wanna let it cool?
Woo!
No, we said peel it off.
Woo, look at that!
That's what the paper looks like
when we're done.
It's really faded now.
But man, you gotta check this out.
This looks good!
It does!
That looks so good!
Oh man, we're gonna be doing all kinds of stuff
on this aluminum.
I wonder if the wood's gonna look as good.
Check it out.
Looks pretty good, huh?
So I'm surprised how awesome that looks.
That really does, it really does.
It looks good.
Woo, that thing was hot!
Take the wood, now we sprayed the wood
with that stuff we got online.
This dye press, we sprayed it.
You gotta mix it and then you spray it.
Let it dry completely.
Taking this picture.
We're gonna put it on a piece of the wood.
It's just a piece of scrap wood from the garage.
I think this one we're gonna do face up.
All right, let's see.
20 seconds again?
Yep, I'll time this time.
All right.
Like an actual timer.
By the power of Grayskull!
Ooh, that's like high pressure.
All right, it's high pressure.
We're just going in high pressure.
High pressure!
I guess I should have loosened it up a little bit more.
20.
Oop, stop.
Okay, open that thing.
Whoa, it's stuck.
All right, right here.
Oh, that didn't work.
Maybe it needs to be longer.
Didn't work.
I don't think it was even.
Didn't work.
We're gonna put it back on.
What?
I'm gonna put her in the center.
And we're in.
All right, won't you have 45 seconds?
I don't know.
You know, we didn't even do any research on the wood.
Not on the wood.
He came up with that last minute.
He threw that over here on this table
and I was like, what are we doing?
Oop, it's smoking.
We got a smoker.
Popcorn, why are you using your hands?
No, it's not aluminum.
And I don't want it to fall off the table.
All right, let's see how it went.
Not okay.
Didn't work.
We'll have to work on that one.
That one sucked.
All right, I don't know if we should put a piece of Teflon
in the shirt.
I don't know if it'll come out on the back.
Oh, I did hear, yes.
I did read that it might go all the way through
to the back if you don't put a Teflon sheet
inside the shirt.
All right.
I mean, let's try that.
We're gonna put a piece of Teflon in first.
Okay, and then another sheet of Teflon?
Yes.
All right, how long?
20 seconds?
Sure.
All right.
58 seconds, go.
Yep.
Oh, wow, that looks good.
Here, take it off.
Okay.
Wow, that came out really good.
So I don't know if you can see.
All right, I say we do a minute again.
Ready?
Yep.
Okay, go.
All right, minute's up.
Ooh, started burning it.
Eh, it still looks good though.
The printing looks good,
but I don't know if you can see at the top of the logo.
I don't know if that's burnt or what.
We swapped out the attachment for the cup attachment.
We got this whole press thing for like $200 on Amazon,
where you can do plates, t-shirts, cups, hats,
like four or five different sizes of cups or something.
Mugs and cups, yes.
Mugs, tumblers.
This is a tumbler.
Think you can pick them up for like three bucks.
All right, that thing's hot.
All right, I'll just put it on for a minute.
Ooh, it's smoking.
Oh my goodness.
All right, maybe it didn't need to be 90 seconds.
Yeah, that looks burnt.
That's too long.
Careful, is it hot?
Okay, that wasn't good.
Yeah, that was 45 seconds.
Smells like fireworks.
Oh, not bad.
Not bad.
All right, the untreated cup that we left in for 90 seconds.
And that's what the one that we sprayed looks like.
We're gonna get some blanks
and we're gonna try those, see what they look like.
All right, that was it.
I'd say we were about 50-50.
Some of the stuff worked great,
like the t-shirts worked out great.
Yep.
T-shirts worked out great.
The aluminum came out amazing.
I mean, the picture on it, it just looks awesome.
It looks awesome.
We also did a logo on it.
The logo came out great.
So these were the purchased blanks.
And then we tried to add polyester spray to the board.
It didn't work, but we think that's
because we didn't leave it in long enough.
Yes.
And then we tried one cup with the coating.
Came out okay.
Looks pretty good.
And one cup we just tried off the shelf from Walmart.
Looks like crap.
Needs the coating.
We tried to spray in the cotton shirt with the coating.
Came out great.
Yeah, looks great.
And we tried a polyester blend and that came out great.
Hey, if you guys liked our project today,
even though we had a couple of fails,
why don't you go ahead and subscribe?
Give us a like, a share, subscribe.
Let us know what you want us to try for you next.
We're down to try to do anything,
build anything, make anything.
Let us know down in the comments.
Otherwise, we'll see you guys next week.
See you next week.