Wie man ein Glas bläst | SWR Handwerkskunst

SWR Handwerkskunst
8 followers
2 Video Views·Feb 6, 2023
This glowing fruit wants to become a glass.
And he is the creator of its form.
How does it work to make a glass?
How does it get to its color?
How does a suitable carafe come about?
The glassmakers from Schmitzfelden do it.
Schmitzfelden in the Allgäu has 31 inhabitants today.
Until the end of the 19th century it was a famous glassmaking village.
But then the oven went out for 100 years.
The village was rebuilt until 1997 by Heimatpflege Leutkirch.
They renovate the old glasshouse and set up a museum.
And in 2003 the association then invites Stefan Michaelis here
and offers him the glass manufacture in the hut.
He can't complain about the lack of space.
15 meters high, 400 square meters of ground.
This is where Stefan Michaelis can really get out.
Every new working day starts with the glassmaker
taking the cooled works of the day before out of the oven.
My glasses here are mostly freehand.
This of course leads to the fact that each piece becomes a single piece.
Through this individual processing of the glass,
it becomes lively.
It's not a sterile piece that comes out of the machine.
And that's what makes it so attractive.
I take it in my hand and feel a slight wave or unevenness in it.
And that just makes the glass more pleasant.
It's just a great glass.
With the carafes it gets a little clearer.
Now I have two pieces with a blue edge.
Up here we have a large diameter on the neck.
Here we have a small diameter on the neck.
But that's the way it is.
Then everyone can find their own personal piece.
The so-called cooling oven,
one of four different ovens in the hut,
can now drive up to 400 degrees.
Cool is relative.
What kind of glass do you use, Mr. Michaelis?
This is a calcnatron glass.
This is my lucky glass.
It comes from a small company that also processes glass.
They notice that.
They can no longer reuse parts in their production.
But we can use the discs wonderfully, use them wonderfully.
It's ideal for us.
For the manual work you need glasses that are called long glasses.
Long not in terms of distance or distance,
but long in terms of time.
I have a lot of time with this glass to shape it
before it is solid again.
A short glass would only be shapeable for a very short time,
which is suitable for mechanical production.
They want to make things mechanically very quickly.
But here at the manual work we need a long time.
That's why we need a glass that can be shaped for a long time.
The pipe warmer is the second of four ovens in the workshop.
One that is operated with gas.
Here we have the central tool,
the most important tool of the glassmaker,
the glassmaker's pipe.
Despite knocking, glass remains sometimes remain on the pipe.
The pipe warmer is there for this.
With the heat of the pipe warmer,
the glass remains jump away from the steel
and the pipe becomes relatively clean.
Did you hear it crack?
That was the glass that jumped away from the pipe.
We can look right behind it.
Now almost nothing depends on it.
What is still on it is okay.
These few glass remains no longer matter.
Here I have a pipe that was already in there.
It is nicely preheated.
It will have 700-800 degrees.
I'm going to the melting oven with it now.
This is the heart of the workshop.
The raw glass melts in here.
It already glows beautifully,
but there is still a bit of a glass thread hanging on it.
I'll pull that away.
Now continuously and catch on.
That's what you call it.
Catch on.
Get the first glass out of the melting oven.
Post the first glass.
I have now tried to pick up the right amount of glass
at the end of the pipe.
This is years of experience.
It has to fit exactly, not too much and not too little.
Now I have my first glass post at the end of the pipe.
It looks a bit round,
but it doesn't have the right shape yet.
The glass is now being prepared with the wooden spoon.
You can now see that I push the glass forward from the end of the pipe.
Everything that hangs in front of the pipe is available to me to work with.
I can't do anything with that.
The spoon is always watered nicely.
It is made of wood and should not burn so quickly.
It must hold many hundreds of glasses.
So keep it wet again and again
so that you can create this water vapor,
which then isolates between glass and wood.
What role does the famous glass blowing play
in all this glass making?
Glass blowing plays a relatively subordinate role.
It is only a component of the entire shaping process,
which is much more important.
This is the turning of the pipe.
When I stop turning the pipe, the gravity takes control.
From the first moment you learn to control the hot glass,
you realize that turning plays an essential role in glass making.
Blowing is completely subordinate.
It is an important component of the shaping process,
but the turning remains crucial.
The glassmaker needs at least 10 years of professional experience
until he has his craft under control,
until he understands the glass.
When I blow for the first time, I pull the pipe up
so that the whole thing remains spherical.
Only by observing the glass can I determine
what viscosity the glass currently has,
how movable the glass is.
That is the key.
I see that now is the right moment to blow up
or I have to wait a little longer.
That's why I have to keep my eyes on the glass.
Depending on how I hold the pipe,
I also determine the wall thickness distribution.
If I now hold the pipe down,
it should be the same,
the glass slowly pulls into length.
And I now prepare the height of the finished workpiece in this way.
It's supposed to be a drinking vessel.
It should be about 10 to 12 cm high.
And they are already starting to form.
And now it goes into the wooden mold.
Here we have the wooden mold.
I just got it out of the water bucket.
It has to be watered permanently
so that the wood doesn't burn too quickly.
The hot glass is blown in here.
That means the glass drop hangs on the pipe,
then fills the mold.
You have to imagine it like this rolling,
which I have prepared.
When do I know that I have to stop the blowing?
There are several indicators that tell me that.
On the one hand, when the steam exits through this steam crack down here,
I know that the glass has now reached the bottom,
the ground has been formed.
And of course no more air goes into the glass.
Then I know I have to stop blowing.
You shouldn't stay in the mold with the hot glass for too long,
otherwise it will burn.
The sheet metal on the wooden mold forms the breaking point
at which the drinking glass can later be separated from the pipe.
The graphite plate ensures a smooth glass floor.
The pipe has now served for the large remainder.
As long as the glass is still hanging on the pipe,
I can't shape the upper edge at all.
So I have to re-attach it.
That means holding it to the ground with my iron.
The iron has a glass drop at the front.
With the help of this glass drop,
it is now possible for me to attach the iron exactly centrally to the glass floor.
Iron, glass and pipe now run in one axis.
With the incision scissors, he prepares the separation of the pipe.
Despite its name, these scissors do not cut the glass.
It is the temperature difference between hot glass and cold iron.
This creates micro-cracks.
And right here the pipe can then be broken off.
Now oven number four comes into play.
And now the glass urgently has to be reheated again.
From the moment I took it out of the melting oven at 1200 degrees,
it has only cooled down.
It was blown into the mold,
was re-attached and it only lost temperature.
The temperature was now perhaps still at 400 degrees.
And at some point the point has reached where the tensions become so great
that you have to reheat it again to prevent it from tearing.
And now I can continue working.
Now the colorful edge is being laid.
Now comes the actual special feature of these glasses.
Some use colored granulate or glass flour to design colorful glasses.
Stefan Michaelis uses colored glass sticks for the drinking glasses and carafes,
which he also melts on the glass.
They make the colorful edge of the glass particularly color-intensive and shiny.
Now I'm putting two sticks together here.
The one that was in use has become too short.
Then I would burn my fingers.
And why are you wearing glasses for this? What kind of glasses are these?
These are glasses with titanium glasses.
Because the moment I heat the glass in the flame,
a bright yellow light emerges and that filters the glasses out.
That means it is possible for me to see the temperature of the glass better,
to assess the liquid better,
to see that it can actually melt now.
I always have to keep an eye on the temperature of both pieces.
The glass must not get too cold,
but the stick must get really hot,
1100, 1200 degrees,
so that I can put it on now.
Pull away the rest.
And next,
the small opening, which is now provided with color,
heat here in the heating drum.
The front edge is now made so hot
that the paint layer melts in
and I can then push the whole thing up
so that the glass gets its final shape.
The opening of the glass, you can see it, is about finger thick.
And of course I now have to enlarge this small opening.
That means I heat the glass mainly in the upper half.
And if you look closely, you can see that
the front half of the glass is already soft and moldable.
Here I take my drive pliers,
a fairly universally usable tool,
but made of metal.
And metal, when it gets hot, sticks wonderfully to the glass.
To avoid that, I have wax here.
Then I put a few drops on my work surface.
And as soon as I put the hot tool
with the hot end here,
the tool automatically absorbs a little of the wax.
And so it always has the necessary wax film on it
so that it does not stick to the glass.
Now it is somewhere between liquid and solid.
The upper edge still has a temperature of over 1000 degrees.
With the graphite plate, smoothen a little more.
It is a wonderful tool, does not burn,
does not stick to the glass, does not conduct heat.
So, last touch.
Separate the glass from the iron.
It was only attached.
Do not melt.
A sharp tear has formed on the bottom of the glass.
It cannot be avoided.
But with such a burner, of course, melt wonderfully
so that there are no sharp edges left.
And now the glass goes into the refrigerator.
The oven can relax until tomorrow morning.
Then the oven has cooled overnight.
And then I can take the glass away.
I remember my spare time.
We had an oil barrel next to the work table.
We had a burner on the bench.
We had an oil barrel, an empty, clean oil barrel.
And that was full of shards at the end of the week.
That means we only produced for the ton for weeks.
I always say, you had to practice, practice, practice.
As long as you could do the piece.
That was given up, it was noted.
Then the production for the ton started again,
as long as you could.
And that went on for three years.
We pick up every shard.
Every shard is melted back in.
The glass has the fantastic property
that you can reuse it infinitely often.
And the reason why you recycle glass,
why everyone should recycle glass,
is not in the raw material of the glass, but in the energy.
The moment shards are melted in, energy is saved.
And of course we also save a lot of energy
by reusing and melting every single shard.
The refrigerator does not only cool the finished pieces of craftsmanship,
but also preheats the raw glass
before it enters the melting oven.
And it has a fierce 1,200 degrees.
You need crystal glass shards for the drinking glass.
This is what the glassmaker calls all uncolored glass.
On the recycling containers,
white glass should not actually be there,
it would be crystal glass.
It runs uninterrupted.
I tried to make it a bit home-use.
That's between 4,000 and 4,500 kilowatt hours in three weeks.
And that's the amount of straw
that a four-person household uses in a whole year.
We need that here in three weeks.
That includes the melting oven, the refrigerator.
But the biggest part is the melting oven.
It runs day and night and needs its energy.
Anyone who wants to make glass has to spend a lot of energy.
After all, the photovoltaic system
supplies almost half of the energy required.
He still has to buy the rest at the moment.
But he plans to install more solar modules.
It used to be done with wood.
The craziest numbers are circulating there.
How much wood did the glasshouse swallow?
A number that has come across me several times,
whether it is true or not,
is 8,000 square meters.
That means a block of square meters
that is eight kilometers long.
That this has marched through this glasshouse in one year.
Once the forest was gone, the glasshouse moved on.
1825 to Schmitzfelden,
the last link in a chain of hiking huts in the Allgäu.
In 1898, the oven went out here too.
Now, however, it is suppressed
by industrial glass manufacturing.
We are here at the Eschach,
the river near Schmitzfelden, a small river.
Here we find the important reason,
one of the main reasons
why glass was made here, namely quartz.
Quartz appears here in the form of a rock,
of gruel of different sizes and shapes.
It was collected here by women and children in the past,
so that glass could be melted from it.
No one becomes rich with handmade glass today either.
Because Beate Wirth is still working,
Michaelis can also run the glasshouse museum.
With this second base,
glassmaking is not quite as risky in terms of economy.
In addition, this also guarantees a certain discount.
The native Mönchengladbacherin
learned her craft in the Bavarian forest,
stayed in the Allgäu
and has been in Schmitzfelden with the oven since 2008.
The manufacturing time per glass is almost 10 minutes.
Stefan Michaelis is happy
when Beate Wirth helps in the oven.
Although her specialty is carafes,
they are even more complex to manufacture than the glasses.
Oh, the pipe.
Oh, the pipe is bent.
And that's bad,
that's why it sticks to the oven.
With a bent pipe you can't blow straight things.
After he had completed his training as a glassware maker,
the Rhineland-Palatinate first went to Stuttgart.
He studied special equipment at the Chemical Institute of the University.
He went to London, where he did a degree as a glass designer.
He became self-employed in Edinburgh
and finally landed in Schmitzfelden with his family.
How practical that Stefan Michaelis
can use the workshop of the local court smith.
And that he can repair his tools himself as a good craftsman.
The pipes have to be repaired regularly every few weeks.
If the pipes don't run around anymore,
if they are bent, I have a lot of problems.
On the one hand, the pipe can stick to the oven wall
because it closes quite tightly.
On the other hand, it is difficult to straighten the workpiece,
i.e. the glass or the ball or the vase that you want to make,
when the pipe is already bent.
So you should have a straight pipe from the beginning
so that the workpiece can be straightened later.
Since water is almost like a trendy drink,
there is even an apprenticeship as a water sommelier,
it was only logical for the two of them
to offer a suitable carafe.
By the way, all works are not only water-
but also dishwasher-resistant.
It starts well. I have a clogged pipe.
Sometimes it happens that it closes at the front.
Then you have to blow through it.
So there are remains of glass on it
and a little slag from the metal.
Then it is permeable again.
I'll put them in for a moment to warm up.
At the moment I'm going to make a carafe with a colorful edge,
matching our colorful glass.
It still looks like the glass, right?
Yes, the beginning is always the same.
It could be anything now.
It could be a glass, a large floor vase.
The beginning is always the same.
The first layer of glass is formed and a little inflated.
And what comes next?
Just wait.
To wrap the second layer of glass around it,
I need a certain stability.
It must not be too hot,
otherwise I would lose what I have prepared here as a pre-post.
If I go back into the hot melt with it,
I'll lose it.
That's why I need a certain stability.
It has it at a very specific temperature.
It's still too hot.
I just have to wait.
To accelerate this, I use compressed air.
I want to keep working now.
After each draft, she forms the glass post first.
This is done with the vulgar wood,
as the glass makers call the well-watered wooden spoon.
Is that enough for the carafe, the amount of glass?
Yes, I hope so.
Should be enough.
The carafe must not be too heavy.
1.2 to 1.5 liters of juice, water or whatever should go in there.
If the carafe, the glass, is already so heavy,
then it's just uncomfortable.
Then you may have 3 kg to lift.
That's why I need enough glass to be able to shape the carafe well,
but not too much.
It must not be too heavy.
It would be easier to make it heavier.
Working with a lot of material is easier.
But it shouldn't be heavy.
When Beate Wirth makes a carafe,
the process differs in one essential point.
She doesn't use a wooden mold like the glass to shape the carafe,
but blows it freehand.
What are you doing here? Do you want to separate the pipe?
Not yet.
It's well observed.
I'm not separating it now,
but I'm preparing it now so that I can separate it later when it's finished.
It is important that I prepare this breaking point at the top
and that I fix the diameter from the top of the carafe.
The diameter should not be too thick at the top, not too large.
Otherwise you can't grab it well.
We thought that the diameter should not be too large.
Otherwise it will be uncomfortable to hold.
Now she decides on the one hand how high the carafe will be,
on the other her wall thickness.
It just looks like it, but it's not.
Will every carafe be the same?
No, I can't make every carafe the same.
That's impossible for me.
Maybe there are gracious glassmakers who can do that.
But I don't think it's that important either.
I don't think it's that important that they're all the same.
They should all be beautiful, but they can be different.
The people who use them are hopefully all different too.
It takes time for the final design of a carafe to be developed.
It takes time and a whole series of preliminary studies.
Something like that doesn't come out on paper,
but it is tried and tried and tried,
which variant is best in the end.
From the moment you decide to implement the impulse,
the idea impulse, until it works,
what you want and until you settle down.
Definitely yes.
Because it runs during normal production.
Everything else also has to be served.
For me, a very important decision was that the carafe
fits the colorful glasses, also in terms of shape.
Not just any carafe in the traditional pear shape with a colorful edge,
but our colorful glasses have a slight cone,
and the carafe should have that too.
I absolutely wanted a carafe and not a jug.
That means I didn't want a jug.
I think it fits our glasses much better.
Sometimes you have to do a little convincing work.
But now it is.
Now I have to cut off the piece if everything goes well.
To do this, she sticks the iron to the bottom of the carafe.
Attached, as glassmakers say.
The glowing glass at the end of the tool is not only shaped,
it also has to cool down.
Up to this special point, where it glows,
but is not too strongly connected.
Artificial.
Like so many things in glassmaking, it is a matter of experience,
a matter of feeling.
At the end she knocks off the iron,
and then the carafe should stay safe.
Now she uses the incision scissors again.
Their cold metal creates tension cracks when touching the hot glass.
Only then can she knock off the carafe from the pipe.
So that the glass body does not get too cold during all the procedures
and therefore tensions arise,
it quickly gets into the heating drum again.
The glassmaker must always know exactly,
even without a thermometer, how hot her glass is when.
Whether she still has to heat it up.
Here the saying really applies, experience makes the master.
What's going on right now?
It's about ...
The piece is finished at the bottom.
That's why I turned it over.
We do that with glasses too.
With all vessels that are processed from both sides,
you have to turn it over once.
Now I make sure that the temperature fits,
so that it does not jump.
It should not come below 500 degrees below,
but also not above 800, 900,
because that should not change the shape.
It has to get really warm at the top,
because a lot is yet to happen.
Is this your experience or can you see it somehow?
I can't see it anymore.
The flame is so bright that I can't judge the glow.
These are really experience values.
I can no longer estimate the glow from the temperature,
but the mobility of the glass.
When the glass starts to move,
then I know that it is now a little over 1000 degrees.
But that's probably still too cold, I'm afraid.
Exactly, underestimated, so warm up again.
What happens now is that I warm it up at the front
and I'll blow it up from the front with the gun,
so that it changes at the front,
as I need it to make the edge and the cast later.
When I've done that, the color edge should be on it.
Always provided everything works.
That means the glass should get another bulging at the top,
or when it is blown up with the compressed air?
It should be a little wider and thinner.
I have a relatively thick spot at the top.
Of course, I could cut that down.
Many glassmakers do that too.
I don't do that, blow it up at the front.
The colored rod is colored with cobalt oxide.
This and the edge of the glass
now only have to reach a temperature just above their melting point.
Then Beate Wirth can put the rod on the carafe.
Glassmaking is exhausting. It's a bit exhausting.
Compared to cleaning all day,
or caring for severely disabled children,
or men, or fathers, or mothers.
It's exhausting, but it's affordable.
Only one essential step is missing,
to drive up the opening with the color edge.
So far, this one is still quite narrow.
But this is only possible
when the glass in the heating drum
is heated very carefully at its upper end.
Now only the edge is supposed to be moldable,
not the whole body.
She uses the drive pliers for this.
She models the opening of the carafe with her.
Gives her the final design, her personal note.
And do you go into leisure for three years
and then you can do what you can?
You go into leisure for three years,
at least if you still find an empty space.
When I finished my apprenticeship,
I was able to work in the oven
without putting my colleagues in danger.
That's what you can do after three years.
What I can do now,
I think you need at least ten years of experience in the oven.
I applied for an apprenticeship for two years.
I was the second woman in Germany
who did that, because women don't do that.
They can't do that.
But then it worked out.
So I knew it could have a good outcome.
It's the same with making glass.
Sometimes you have to bite your way through until it works.
But then you have a new product,
you try it out and think,
you despair a lot because you think,
I'll never make it.
Then you go home, sleep over it
and the next day it suddenly works.
I've never wanted anything from glass
that didn't work at some point.
Your hands are burning now?
I don't have cold hands,
but when I go to the crock with my gloves,
it's in a pretty sensitive area.
It's so cold that it's pretty tense.
If I put on the cold gloves,
it'll jump right away.
That's why I have to warm up the gloves.
I have to make sure I get rid of it quickly.
It doesn't get in the gloves.
It gets a little cozy, warm,
but not uncomfortably warm.
But the crock has to get away
from this contact surface.
He's safe there now.
It could be that in the next 5 minutes,
if I've cooled him down too much,
that he'll jump right away.
But that would be a novelty.
I don't think I've ever had that
with crocks, with carafes.
Were you satisfied with the carafe?
It didn't turn out the best.
The cone, the inclination,
is not perfect.
It should have been 10 cm higher.
The diameter at the top of the grip
should have been at least
1 cm narrower.
But that's just my opinion.
I'd like a carafe that's very slim,
with a very thin edge at the top.
I think that's more attractive.
I want one where I can grab well.
And then a customer comes,
or I brought a friend yesterday,
and I asked him twice,
does he really want it?
He says yes.
Then he shows his hand,
and it's twice as big as mine.
That was his perfect carafe.
So I'm not 100% satisfied,
but that doesn't mean
that it's not right for anyone else.
We're far from an industrial fabrication.
What we're doing here is a small series,
maybe 1,500, 2,000 pieces per year
of these glasses with the colorful edges.
The carafes, of course,
also come with the same colors
as the glasses,
front to back, absolute craftsmanship.
About 4,000 years ago,
mankind made glass by chance.
The first 2,000 years,
roughly speaking,
jewelry was made.
And then about 2,000 years ago,
mankind realized that you could
also make a hollow vessel out of glass.
What we're doing here is
the result of the last 2,000 years.
The glassmaker's craft
is such an artistic,
multifaceted and meaningful profession.
Even UNESCO has understood
that glassmaking is an art.
Since 2015,
it has been on the list
of immaterial cultural goods,
because the craft of glassmaking
is almost completely suppressed
and as a result,
there are hardly any training places.
Offspring urgently sought.
Now look, Beate.
Now a bowl,
not made of porcelain,
but made of glass.
Well, you can do that.
With a colorful edge.
Matching the glasses.
But not anymore today, right?
Not anymore today,
but I have the idea in my head now.
And not only in blue,
but also in green,
in purple, in all our colors.
There are 9 different colors.
