Wie man eine Uhr macht | SWR Handwerkskunst

SWR Handwerkskunst
8 followers
5 Video Views·Feb 5, 2023
Those who come too late will be punished by life.
Our ancestors already noticed that.
And so the question is how to make a clock almost as old as humanity itself.
Already 5,000 years ago, the Egyptians fought for the sun clock and were on time when the sun set.
The ancient Greeks were allowed to speak in court until the time ran out with a certain amount of water.
And to this day, sand clocks are divided into measurable portions, which cannot be stopped.
Time is running out.
But only a brilliant clockwork changed the pulse of the world in the 13th century.
It is not known who, when and exactly where had the idea.
But today the question is who is still making mechanical clocks.
We drive up into the South Black Forest in search of someone who still makes clock parts himself and assembles the whole mechanics,
i.e. not just puts a factory-made work into a housing.
Here, where the Deutsche Uhrenstrasse runs, the clockmaking craft has been flourishing for centuries.
This is also where the Deutsches Uhrenmuseum and the oldest German watchmaking school in Furtwangen are located.
And here in the village of Schönenbach we come across Andreas Meier-Schwarzwald,
who still supplies a third of his clocks with mechanical clockwork.
Today the company is run by the brothers Adalbert and Clemens Meier, in the sixth generation.
So Andreas, the company founder, was ...
This is the grandfather, then we have great-grandfather, great-great-grandfather and great-great-great-grandfather.
So here we want to show how to make a clock.
A simple clock with mechanical eight-day clockwork and a bim-bam-bam.
That this craft should be rather tricky and not to be left to chance,
can be seen in this calculation of gears.
It doesn't just sound like higher mathematics, it is.
For example, the clock wheel, which will meet us again, is calculated according to the laws of trigonometry.
Today this is drawn by the computer.
Clemens Meier regularly mills new gears in different versions.
They are, so to speak, the turning and fishing points of a mechanical clockwork.
The bearings consist of a special brass material.
This is a special quality of wheels that we need here to achieve the hardness of the gear.
The gears are treated, either gold-plated or bitten or nickel-plated,
depending on how our customers want the clockwork.
The bearings are clamped on a lathe and then inserted here.
They are then clamped in such a way that the gears cannot turn,
otherwise the gear spacing is not correct.
So it has to be screwed tight.
Today it's the turn of the rolling wheels.
The rolling wheel is part of a construction,
over which the chain will later run for a weight.
With this machine, smaller and larger gears can be milled,
0.2 to 0.5 mm thick, with more or less teeth.
The timing has to be exactly correct.
Every gear is checked.
It is here that it is decided whether the clock will work later.
If it deviates, there is no pardon.
Then you have to make a new one and throw the gear away.
This is not usable, otherwise the clock will run wrong or it will not run at all.
Here we have the rolling wheel.
The rolling wheel must be connected to the chain wheel.
We do this in this device by inserting the rolling wheel here
and pushing the chain wheel on the shaft.
Then this spring comes on top.
It is then fixed by a safety disc.
The safety disc is inserted here.
The spring is pressed down here with this device.
Which, of course, always works.
And the spring is then pressed into this shaft.
And so the two parts hold together.
The rolling wheel is responsible for pulling up the weight.
And for the uniform descent of the weight.
The chain runs over this rolling wheel, or rather over the rolling star wheel.
And has the task of pulling up the weight with the help of the chain.
The weight is practically the drive for the clock.
As with an electronic work, the battery is the drive.
For the mechanical clock, the weight is the drive.
When I pull up the weight, I have the energy storage on top.
The clock then runs for eight days.
And after eight days I have to pull up the clock again.
And this chain runs over this chain star.
Our wall clock with a bim-bam beat needs two such rolling wheels.
One for the walking and one for the beating.
How the individual gears are further processed depends on which role they will play in the clockwork.
The wheels are then riveted for further processing.
Then the shaft comes on top, the spring or a star.
This is the star wheel.
Or a smaller gear is riveted.
About 20 wheels will be used.
The entire work consists of 80 to 100 individual parts.
They all have to grip each other at the back so that what we are used to comes out at the front.
The division of time into 60 seconds per minute, 60 minutes per hour, 2 times 12 hours a day.
And so precise as with a clockwork.
What lies here is the basic equipment of such a mechanical wall clock.
You can choose which tones it gives of itself.
With these parts on the table, we can build an eight-day clock together.
With a beating clock, with different types of beating,
i.e. with spring-beat, bell-beat and bim-bam-beat.
This device is part of the clockwork.
It is called a beating device.
This is a bim-bam clockwork.
Bim-bam means how it sounds.
The double beat only announces the number of hours and is very popular.
With the Westminster beat, the full hour is first announced.
Now simple beats follow, according to the time of the hour.
The bell-beat is completely snarky.
In the past, people stood up with their chickens.
You went to bed with them and, by the way, directed yourself further after the movement of the sun,
also after the invention of the mechanical clock, at least among the common people.
Those who had to be careful about strict times,
soon switched to the new technology.
But most people saw the first mechanical clocks on church towers
or in public buildings such as the town hall.
Although they were expensive and susceptible
and liked to go 20 minutes before or after,
they conquered the cities at the end of the 14th century as a status symbol.
In the Black Forest, people began to make clocks about 300 years ago.
A success story, also because people were early on in the division of labor.
As early as 1780, a watchmaker built a clock a day with ready-made parts.
30 years earlier, he worked around it alone for a week.
This so-called Black Forest clock probably dates from the first half of the 18th century.
It is the oldest that has ever been found.
The fact that the early wheel clocks were made of wood
was not due to the fact that the material here grew in front of the door.
We'll get to that in a moment.
But keep in mind that even these early clocks
were not just meant to show the time.
They were also meant to do something in the domestic house.
They were made of wood because the production of metal clocks
was subject to the Zunftregeln and was strictly restricted.
The wood clockmaking, on the other hand, was considered a free trade.
Everyone was allowed to build wooden clocks, even women.
First, watchmakers brought progress in every corner.
Black Forest clocks were good and cheap.
They quickly conquered the European market
and became a global export hit.
Our family business was already involved at the time.
In this photo from 1900, the employees of AMS present
a delivery of goods to London for the family's own branch.
And Adalbert Meyer shows us the oldest preserved document.
A bill about clocks and clock parts,
which the company founder Andreas Meyer
sent to his son German in 1841.
German came back and continued the business.
He handed it over to his son Josef.
He was a brilliant technician,
who developed great ideas.
Unfortunately, he only lived for a short time.
Then came my grandfather.
He survived the difficult times of the war.
And it went on with my father, my uncle, after the war,
until the 1990s, when we both started.
Did the two brothers ever want to do anything else?
We both have a technical background
and learned in different companies after graduation.
I studied fine mechanics and optics.
I worked abroad for four years.
Four years in Japan.
The alternative was a sales job in South-East Asia.
That's where I decided to go to Schwarzwald.
I did an apprenticeship as a fine mechanic.
I studied economics at the University of Pforzwagen.
Then I worked in another company for four years
to gain experience.
I was interested in clock technology.
I like the design.
I learned to draw from my father.
To this day, he produces drawings of his father.
Such as these circuit boards,
for which he calculated the arrangement of the holes.
The parts have to fit into these holes.
Even with a big clock,
the parts are not really big,
so we have to rely on Clemens Mayer.
He is now assembling the clock.
The circuit board is inserted into the template.
Then it is checked whether the gear is working.
Here is the gear.
The chain will run over it, over this star.
The gear wheel and the impact wheel are inserted here.
Once left, once right.
For the two weights.
Then we have the gear wheel.
It comes above the gear wheel
and grabs into these wheels of the gear wheel.
Thus, the weight-releasing movement of the gear wheel
is transmitted via the so-called drive to this intermediate wheel
in the desired faster translation.
Then I need the middle wheel.
This determines the pendulum length,
which we need for a pendulum.
It comes in here.
Here it is already determined
how long the pendulum of the clock may be,
or how short it must be.
And thus also how large the housing will be,
how much space the whole clock ultimately needs.
Then comes the gear wheel.
The gear wheel.
There will be an anchor over it later.
And it releases and locks the gear wheel.
It releases and locks it.
There will be this ticking afterwards.
Tick, tock.
We will see how exactly this works with the tick, tock.
Then comes the pendulum wheel.
At the same time as the clockwork,
Clemens Meyer puts the pendulum together on the right side.
After all, we also want to hear what the hour has struck.
The star wheel.
It releases this pendulum afterwards
and releases the hammer afterwards.
And the number of hours
where the hammer hits the stick
is determined by these ticks.
Then we have ...
This is the wing wheel.
The wing is used as a winch
so that the gears run evenly.
And the minute wheel.
The minute wheel later moves the minute hand
and is inserted into the gearwork
so that it turns exactly once per hour around its own axis.
The template is then pushed together
to hold the wheels, to fix them.
Otherwise they go away
and I can't put the rear plate on it.
Now the rear plate is inserted
and now the pins of the shafts have to fit exactly to the bore.
Now everything is fixed.
The gears are fixed.
And we can screw the two plates together.
Four screws.
They are tightened crosswise
so that the tension from the plate is released.
Then the template is opened again
and the wheels are then checked.
If they run, it has to make a nice gear
and the wheels have to run practically in single gear.
What if they don't do that?
If it doesn't work, you have to open it again
and have to rub the bores
or have to replace the gear sets.
In two out of 100 cases, it is said, command back.
Screw the rear plate back on
and look for the error with a sharp eye.
If the gears don't run and don't work well,
then you have to replace the individual gears
and use a new gear.
If it doesn't work, you have to replace the complete gears
and build a new one.
Nothing for impatient people.
If you make a watch, you have to take it very carefully.
But after it took thousands of years
until someone had developed the system,
you should also take the time to implement it so that it works.
Finally, the mechanical watch changed our life fundamentally
and into the language.
Only since this invention, someone doesn't tick correctly
or it hits 13.
Now the device for our bim-bam hit comes on the front plate.
We first press the hour trigger
on this minute wheel shaft.
In the second step, the creator is pressed.
The creator then pushes the counter one step back.
That always means the number of hours.
Thirdly, the warning comes into these two holes.
Then the counter is placed below the minute wheel shaft
and is then riveted.
With such a calculator with creator, warning and counter,
you can, for example, imagine a stopped watch
with fast forward rotation of the pointer
at the desired time.
It then automatically hits the appropriate number of hours
and doesn't go on where it stopped.
And in the last step of the work,
the minute wheel is connected to the hour wheel again.
The hour wheel moves the hour pointer
and in 12 hours it turns exactly once around itself.
This is calculated, we remember,
according to the laws of trigonometry.
Today, fortunately, from the computer.
If everything works out,
the bim-bam-double-hit sounds once every half hour
and at full hour, appropriate to the time of the watch.
If not, confusion threatens.
Then the pointer indicates three o'clock
and maybe only hits two.
Before our watch is finally assembled,
we take a look at the face it should get.
There are also different possibilities
with our simple variant.
The Meyer brothers deliver watches all over the world.
And Adalbert Meyer, who takes care of business,
knows what preferences there are.
On the inland, in Germany,
you want, for example, Arabic numbers.
You also have more interest in a Funk and Quartz watch.
Abroad we need Roman numbers
and the Roman numbers as much as possible
with a mechanical clockwork,
which contradicts the old classical tradition of the Schwarzwald watch.
The classic Schwarzwald watch had above all one face,
a painted wooden dial, the so-called shield.
Before it was painted and covered with a protective varnish,
the bright dials were primed with poisonous lead-white.
You didn't get old at work.
Back then, the tastes varied depending on the country.
In France, colourful things were sold,
often in blue, white, red.
Flower motifs were popular.
For Spain, it was supposed to be a bit more martial.
Even the sign painters reacted to current events
when in 1827 a giraffe was sent from Egypt to France
and led by foot from Marseille to Paris.
This sensation was not just a topic in the newspapers.
Businessmen made sure
that the exotic animal made it to the living room.
In 1908, a watchmaker from Furtwangen
made this painted shield watch with Turkish numbers
We want to print Arabic numbers for our modern watch.
Clemens Meyer will print them with a special colour
on the dial, depending on the material.
Our dial is made of aluminium
and is gold-painted or eloxated,
i.e. with a protective layer.
You can also choose between silver, white or transparent
and, of course, with Roman numerals.
A round dial has proven itself
against all modernizations and digitalizations.
The shape of a face seems somehow sympathetic to us,
familiar to us.
But no matter whether round or square,
you can see at a glance how late it is
If the dial is the face of the watch,
the pendulum is the heart.
Without a pendulum, it would go out of rhythm quickly,
which Clemens Meyer noticed early on.
The pendulum of the watch always swung nicely
and as a child we could always reach for it
and hold the watch and adjust everything.
Only the pendulum ensures that the wheel works evenly,
i.e. in rhythm, and the watch works precisely.
The idea was first given by Galileo Galilei
at the end of the 16th century.
Here is a model.
The principle was refined and implemented
almost 100 years later by the mathematician
and physicist Christian Hörens.
In the rhythm of the pendulum swings,
the anchor stops the wheel and releases it again.
This principle of inhibition ensures
that the wheelwork does not become more and more fast
without inhibition, i.e. without braking,
with the weight decreasing.
At stopwatches there are minute pendulums,
which swing back and forth exactly 60 times per minute.
Shorter ones are faster and must be translated accordingly.
It is clear that a pendulum should not expand in heat.
Brass or aluminum is well suited.
The watch can also be regulated with the pendulum.
Here we have a pendulum rod that is punched,
the thread is turned and slotted.
Here the pendulum is hung into the clockwork.
Here at the tip the pendulum disc is attached.
It is pushed up here.
The spring is attached to the thread.
The nut, the pendulum nut,
fixes the rod and the pendulum disc together.
The pendulum rod has the function
of fine-tuning the clockwork.
If I turn the pendulum disc here,
I can move it down.
Then the pendulum rod becomes longer
and the clock runs slower.
If I turn the pendulum disc up,
the pendulum becomes shorter and the clock runs faster.
In order for the clockwork, dial, pendulum and weights
to become a real clock,
Emanuele Scorzari comes into play.
Since 1975, the Italian is part of the family.
First, the finished clock comes into the suitable workbench.
And again he shows what makes a good watchmaker.
He should be skillful, patient and precise.
Maybe even a little clumsy.
Here you can see where the pendulum is hung,
which then, through the corresponding device,
in conjunction with anchor and anchor wheel,
ensures the exact beat, i.e. the tick-tock.
The clockwork must be screwed well in the box,
again at all four corners and tightened crosswise.
Then the chains are tightened.
And Emanuele Scorzari checks
whether they are running properly over the pendulum wheels.
Every time you pull the weights up,
you should do it carefully so that the chains do not jump down.
You know the problem from the bike.
You can do a lot wrong.
If the chain is not right on it, the clock does not run.
The weights are then hung on the hooks and eyelets.
They must withstand 2 kg each.
The chain rings ensure, like a kind of brake,
that you can not pull the weights too far up.
The dial is still missing.
To do this, our gold-colored aluminum disc
is attached to wood with the Arabic numbers.
And with a front wheel,
also made of gold-eloxated aluminum.
Turn around, work with the box on it
and screw well again.
And if everything is right now,
the indicators can be connected
to the hour and minute wheel in the middle of the dial.
Without indicators, the whole construction would be pointless.
Only they make the course of time visible in minutes and hours.
Now it's the turn of the weights.
Outside polished brass, inside made of iron.
And, as I said, every 2 kg heavy.
Whether the clock is hanging straight,
you can also hear, as we will see in a moment.
The indicators must not wobble
and not rub against each other on the dial.
Otherwise it does not work properly or stops completely.
How important it is to work carefully,
the old-fashioned watchmaker should have internalized
as well as his two bosses.
My father quotes his father,
so my grandfather, and he says,
what you do, you can do right away.
I noticed that.
I noticed, or I was told again and again,
the clocks have to run right.
That means a wrong time
is not accepted by any customer.
That is probably true.
That is why the finished watch is observed.
12 full hours, so long
until the hour hand has run around once.
But first, very important,
the hook should be well attached.
It must not fall down.
Oh, it's broken.
No, it's broken.
A lot can be broken.
The case can be broken, the weight can be broken.
That must not happen, that the watch falls down.
If the watch is transported or even just hung around,
pendulums and weights must be removed.
Both will only be reattached
when the watch is back on the wall.
Such a model costs 420 euros.
What should the future owner
pay attention to when hanging up?
Simply hang it up,
put a watch on it,
make sure that everything swings freely,
that the watch is right on the wall,
that it does not hang forward,
otherwise the pendulum will write on the slot.
Then it can happen that it stands still.
Make sure that the case is first straight
and secondly does not hang forward
and that nothing stretches.
If the watch is straight, it ticks evenly.
What you hear at home, where nothing else ticks,
also without reinforcement by the screwdriver.
If it hangs, i.e. does not tick evenly,
you have to adjust it.
More than two minutes a month it should not go before or after.
If it does not fly down
and is brought to clean and oil every 5 to 10 years,
then such a watch runs for decades.
What hangs here simply shows the time.
Optically and acoustically.
And that's actually enough.
But watchmakers have always had the ambition
to make a watch more complicated with a few complications.
And we do not want to end the film
without taking another look at the neighboring museum.
Today another attraction,
this astronomical world clock,
made in the nearby Villingen
between 1880 and 1885,
three to three and a half meters in size.
At that time a sensation
that was performed in self-rented halls.
There you could not only see
how late it was in the Black Forest,
but also in San Francisco, Calcutta, Melbourne or New York.
And even in Stuttgart.
Still and again asked
the course of the sun and the phases of the moon,
if not in the sky, then on a watch.
Highlight of this astronomical world clock.
The twelve disciples pass by Jesus
and are blessed.
Such gimmicks are less in demand today.
But as a complication
every additional function is valid in clockwork.
The tourbillon,
French for whirlwind,
The construction is supposed to compensate for the inaccuracy
that arises due to gravity.
Actually, the clock would go exactly without a tourbillon.
But such a complication
the watchmaker does not finish because he has to,
but because he can.
Once you have lost the wheel works,
you always face new challenges.
The clocks are not so easy to get rid of.
There is a saying, once a clock, always a clock.
And I think that applies to our family.
Of course, in the family business
175 years after the foundation
there are various clocks.
Also controlled by radio and quartz
and with faces for the different tastes in the whole world.
The last cry are wood, stone,
aluminum, glass combinations.
And right now the brothers are working on a monoclock.
But that's another story.
After 42 minutes
and 37 seconds
39, 40, 41
so in any case right now
our broadcast time is over.
For the first time we have seen how to make a clock.
And everything else we tell another time.
As time goes by.
