Highline Rigging Example - Iceland Part 2 of 5 - Haifoss

HowNOT2
100 followers
4 Video Views·Aug 2, 2017
We established 5 highlines in Iceland in a week. Check out all 5 episodes where we explain how we did each one! This 2nd line was rigged on mud cliffs!
Thank you Doddy (Þórður Sævarsson) for hosting team "So Fucking Cold" (Sara Kokkelenberg, Kim Weglin and myself) and providing the music for this video in his album "My Sweet Baklava - Drops of Sounds".
Check out www.hownot2.com for a ton of slack content.
See Slackline Iceland's facebook page at www.facebook.com/slacklineIceland/
Want to see how we rigged some highlines in Iceland?
Check out how to think outside the box on this episode of How Not To Highline.
I'm Ryan Jinks and welcome my gear closet.
And yes, I am wearing a puffin hat.
And we got this puffin hat in Iceland where we spent a week
establishing five new highlines.
Check out some of the clips from our trip.
the area with the two waterfalls.
It was 25 meters long, and we named it Fourth of July
because it was on Fourth of July.
Now, before I show you how to rig that, check out slackademics.com.
We're collecting all the slack content in the world into one sleek looking website.
You can also buy T-shirts that Kim has made and the bolting T-shirts like this one
go to support the bolting fund.
Anyways, check out slackademics.com.
The link is in the description below.
Now, I'm used to Yosemite granite when I go to highline.
When we showed up to Hjallfoss, it was mud cliffs.
We did kind of expect that.
So we came prepared with some lumber that we got from the hardware store
about yay big.
We buried that lumber and wrapped it with span sets for dead man anchors
and bolted what we could on either side.
Excuse me while I build an anchor.
Dottie, come here.
Check out my deep brown hole.
Oh, my God.
Drinking whiskey.
We're just shoelaces untied.
We wanted to wrap this boulder,
but you can't.
So we lifted it's skirt and bolted it.
This is how you bolt an all natural anchor.
Come follow us over here.
We had the same problem here.
This is how you bolt an all natural anchor.
This hole is this deep.
And we buried three pieces of wood.
We girth hitched a span set.
Our two bolts are natural bolts.
And this equalized with our whoopies the way we like it.
And we used our bag of shit
to lift it up because we wouldn't want the moss to rub it.
We might have braided it.
Never stand on moss near a cliff edge.
Or you may not make it to your next high line.
It's four a.m.
I'm ******* tired.
This is.
Can't believe you have bugs here.
OK, so in case that anchor doesn't work the way we were hoping,
we have wrapped this rock,
which is at least 30 meters away
from our anchor over there.
I got on my way.
We chose where our master point was.
So you got to work with what you got.
So instead of wrapping this boulder, which is a great boulder,
just the way it's buried in there.
We bolted an all natural line.
But we can cover it all up with the moss
and it's not going to bother anybody.
So we have two strands of static rope going to our boat for redundancy.
And in this hole, we found this rock that was completely
we found the bottom.
And so we drilled through the rock.
We have no idea how good it is.
But it was deep enough to bury our dead main anchor.
So we have a bolt, which is what the span set is.
And our wood that we buried, which is our other span set.
We equalize all those points
and make our master point like normal, equalizing sliding necks with whipping sleighs.
So we have our master point.
And we put a soft release on here.
But there's really no point when your anchor's stretched and your rope's stretched
it's really loose.
But it's on here.
We backed up the tail in case something were to come loose.
OK, just in case you didn't know, all natural bolting is a play on words.
All natural means you didn't use bolts.
But in this case, we put our bolts in strategic places.
So you're never going to see them.
Hiawatha is a populated area, maybe not at 4 a.m.,
but there's a lot of people that come visit
and they don't want to see our bolts sticking out of the ground.
So we made an effort to put them in places you're never going to see them.
We also drilled the holes deeper than they needed to be.
We took the hangers with us.
And if the studs were ever a problem,
we can pound them in deeper and plug the hole with a little mud.
We also made sure where we had our dead man anchors looked as normal as possible.
So if you didn't know we were highlighting there,
you would never know anybody was there at all.
Now, be sure to be careful when you're taking out your dead man anchors
that you don't hit your span set with the shovel.
You got to take your time and it can take a while.
If you're wearing dark colored jackets with a darkish, beautiful background
and it's super cold outside, you could always take your clothes off and walk naked.
And you can see here how my stark white ass has a nice contrast with the background.
However, you're probably not looking at the waterfall anymore.
Rigging all natural bolted lines near moss cliff edges could get you killed.
Therefore, you shouldn't highline.
Hey, thanks for watching, but please, please don't go rig your first highline
after watching a guy in a puffin hat show you how to do it.
Instead, invite that guy to your country so he can show you how to do it personally.
But until then, check out these other episodes and don't forget to subscribe.
