Rope Swing Break Test - stabilizing connection rings on highline segments

HowNOT2
100 followers
Aug 28, 2019
Is it safe to stabilize highline rings ON TOP OF an Inov Split for a rope swing. We pull test a simulated rope jump rig in the park and filmed it slow motion. This "Jenks Stabilizer" with 2 additional soft shackles could be all we need for the most efficient yet redundant rope swing configuration on a highline. Thank you Lorenzo Demuro, Brandon Hibler and Nick McPherson for helping with this episode.
https://www.hownot2.com/
So I think that this is all you need in order to rope swing,
assuming you already have a high line up. Would you like to see us
break test a real as we can life scenario
on this episode of Slack Snap 3.0? Hi I'm Ryan Jinks and welcome to a
random park where we are not vandalizing anything
in order to do a real life break test. So I feel like we can simplify rope swings
in order to high line and convert them over to rope swings when we want.
Because right now we have to basically put a rigging plate in the middle of our
high lines preventing us from highlining. And if you don't you have
to add a rope to stabilize and actually moves
the ring a lot when you jump because a rope stretches and
yeah it wasn't the best part of my design when I rope swinged.
But to eliminate a rigging plate is with our Enoave Split segmented
high lines now which I use for all my high lines. All of my
webbing is now 50 meter pieces. I have two kilometers of webbing
and I feel like that system is very versatile. It's safer than having big
continuous lines that could fail and drop you pretty far.
But we want to connect the ring, steel rings,
which you rope swing off of, in order to
jump at the Enoave Split because every 50 meters you have a spot. So we're going
to put the ring at whatever Enoave Split we want.
Stabilize it with these two guys. We pad the Enoave Split so the ring's not
setting directly on the Dyneema. Only time I think I've ever padded my
Dyneema. So we're good at slacklining we
promise. So let me show you what I've got set up
here before I cover it up and then I'll show you how I set this up. So come here.
Okay Lorenzo. Howdy. Let's put the ring on here.
What we have is the Enoave Split. This is loose.
This main shackle is in a figure eight. This is five millimeter soft shackles.
The heads are 25 percent smaller and I put them
in the loop here and in the loop here. Now when I do this
in real real life I tape the throat in case this jiggles.
But I've never had a problem before but I didn't feel it's necessary here.
You can see this is the concern for most people
that it is pinching right here and it loses some strength of the webbing when
it does that. But so do quick links. And
what we do is we put the ring basically on top of that and then
stabilize it with these other soft shackles.
So Lorenzo can you velcro this for us? We have shorter pieces and two of them
and we put that there. The idea is you don't want it to
cover up your sewn loops. Got it. So
now we need to put the ring on the velcro.
Usually you don't have a 30 pound dynamometer when you're doing this.
You just slide it over. You will use personal anchors in order to clip
in here and slide over. And then you would take your leash off and attach
your climbing ropes. This is our climbing rope system we'll
explain in a minute. But we need to stabilize this so it
doesn't come off of our system. So what you do is you take a short
five millimeter, a four inch one, and a I think six inch one. These are the
I use here. A long and a short is the bottom one.
And those two sizes work perfectly for what I have here.
So try to get try your darndest to get that in there. Now this is
something I did at the Taft 170 line and I did it on a real high line and it was
difficult. It was only like a 30 foot jump but
it does work. You just have to work it in there. So then you
put it around the ring. Yep. You can definitely cheat and do that.
There you go. Hold on. Is it flattish? There we go. Okay.
Tighten up old Betsy. Close the throat. There we go. Okay. Now pull the ring that
way. Perfect. And now you can stick it on
because of course the button is right here. My rings slide over
this system very nicely especially when this is
taped on both sides. And now what you do, here's the magic of
this system. Matt Stolling showed me this. You put
this through here and through here. Usually you don't have a big old dino on
here. Okay. But you got to go through that.
There you go. And by crisscrossing those it keeps the
ring from twisting. And that is where the magic comes from.
You can barely get that head over. You can actually turn it.
Lorenzo if you want. Yep. Keep turning. Would you guys like to see rope on rope
abrasion? All right. That's good. And now you can
massage that to be proper.
Okay. So how much play do we have in this now?
What we do is we tape this velcro in a real
life situation which I suppose we could do before we actually break test.
Move it back and forth Lorenzo. So it only moves about an inch.
If you use Dura La Vida loops or other systems that have the loops the
secondary loops back here that you attach the backup to they're actually
quite large. And this system wouldn't work
necessarily. But what you could do is this.
You could probably stabilize it just like this on the main right here
even though this backup section would technically be over here.
So this system can work for almost any segmented highline.
But that is our rope swing technology. Let me
show you the brake test setup now. So the way this is set up is we have a
dynamometer on our main line. And the reason we
couldn't use the Rock Exotica one that I have is because
this ship breaks higher than that Rock Exotica reads.
Does that make you feel better? Anyways so we have 1.2 kilonewtons
on our main line right now. Lorenzo can you get on that real quick?
If Lorenzo gets on our super short little line here
we're at 2.9 kilonewtons. So that's roughly what it would be if we
were highlining. Close enough. Can you pull the
white rope? And I'll explain what we got here.
This is loose. Our backup is loose which will I imagine
would start to capture some of the stretch
when we pull it. What he has here is what we have here
is the dynamometer attached to the ring so we know
at what point this breaks at. So we know whether or not it's
stronger than the rope. I have a feeling this whole system is stronger than the
like a 10 10.5 millimeter dynamic rope that we would even jump on.
Which is awesome to build a system where this is
stronger than this than this than this and this and this and this is the
weakest part. That is ideal. It's like building a pyramid.
So instead of a jump rope we have this big old dynamometer which we
tried to make a catch system for with our
janky setup and it's not going to work. So we're going to tree pro the
out of it in order for it to not get broken.
And hopefully it keeps the peak force when it slams into the ground.
Anyways what we have there on that tree is a
I think half inch am steel. This is just like slack snap 1.0 our first 200 brake
tests on slack snap. Had a two to one going to
other two to ones up to a pulley which was pulled by my van.
Now Lorenzo has a bigger truck and we're going to use
that. So we did not put a bolt in that concrete over there by that fence
which we mysteriously connected our static side of our pulleys because this
is our dynamic side of our pulleys the side
that moves. So he's going to pull the rope with his
van through that fence so nothing comes flying at his truck.
It worked out that way because we couldn't find the perfect
three or four trees that we needed anywhere else.
So we're going to pull pull pull pull pull and hopefully
shit goes flying because that makes this way more fun.
Keep going Lorenzo. This is going to work.
Keep going. The backup is not engaged yet.
The backup on one side is engaged. The second backup is engaged.
I'm going to move. Keep going. Everything's engaged right now.
You still got room to play. Pull like a mother.
Pull. Pull. Pull. Pull you pussy. Pull.
Oh. All right. Stop pulling because we want to read the dynos.
Yeah. All right. So the backup has engaged.
The backup's engaged. It's probably
freaking high right now. Wait. What happened? Oh Jesus.
Well that's why we pad it. It broke the main.
Yeah. So let me evaluate this. So it broke.
It broke here. So that makes me feel really good about
about this not compromising the soft shackles
and it did not break the loop. I just want everybody including Rad
to know that my loop didn't break and that we got full value out of the stitch.
Just saying. Just saying. And out of that stitching pattern.
At 23.42 kilonewtons is what we got out of this system.
23. Don't tandem rope swing. Careful not to push buttons.
And 22.85 kilonewtons on this. Ropes basically break at this level.
So even if we got our high line stronger there's no point
if the rope's going to break. Now the question is do we want to continue
pulling and push the push that there? Yeah.
Because technically the backup's still engaged. You can see the condition
of that right there. This is where it broke on the last
piece here. This is pulling funky on that just because
right this broke and so there's nothing keeping the ring from going this way
other than you can see all that. All right.
This has very little tension on it.
Pull. Oh wow. So the dyno. Yep. Keep going. Keep going. Oh that was so cool.
Oh my god. And oh my camera fell. Oh yes. For science.
Okay so we got that GoPro. We got our slow motion.
That did not get any reading because well that was on the main.
Did we get any more strength? Oh **** yeah. We got
30 before our whole high line failed. Yeah another trick you can do is
actually tighten the backup a little. So the backup of the main actually work
in unison in order to increase the strength.
But we had ours extra loose because we wanted them to pull individually.
Oh wait this isn't science until we do it
more than once right? Oh that's right. I bought
lots of webbing to test. What's it look like Brandon?
Oh one more time. One more time. Oh oh oh. Oh that was cool. Okay.
Food for thought. We just realized this is still attached to one side.
So if you're okay with supermanning and rope swinging a second time you can do
that. It broke the same side for main
and backup and it broke in the same place at the bottom of the stitch here.
So we got full value that we could possibly get out of
these loops. So let's open that up. Our soft shackles
are perfectly fine because it's not even at a fraction of
you know what they break at. So we're going to reuse these
and set this up again because I have four more pieces of
these that I just bought brand new from Bounds Community.
So let's do this experiment one more time and see what we can get
with the oh oh my poor camera. And we'll see what we can get with
the back. We can make the backup. We can make the backup a little bit tighter.
Yeah. And that way we can see if we can get an increased strength. If
we intentionally know that we're going to be rope swinging
on a specific segment. How did it feel for you? Was it as good
for you as it was good for us? It was a pretty good release. It was a
good release? Okay. We're all set up again. We have our
soft shackles on this ring and it doesn't move more than
two inches approximately. Main. Main. Backups a little tighter than
they used to be. You can see here how there's very
little there and ideally this would capture
some of the weight. So we're going to set this back to zero.
Our peak force so far when we were pulling it
was basically two kilonewtons and yeah this whole system is pointless
but we have it. So you ready Lorenzo? Ready. Steady. Break
test number two. On your mark. Pull and just stop when the
first one breaks. Stop. Stop. Stop. I want to check something.
Peak hold. Okay. Just leave it. Sorry for the delay folks. That is at six
kilonewtons and peak hold is on so you can continue.
Literally. What a what a beautiful setup. If I say so myself.
What a clever experiment design. Look at those trees.
Look how they creak. Oh stop. Stop. Stop. Stop.
So this side broke. You can see here looks like that. What's
that reading? 25. Oh yay we got more. Come on focus.
Focus. I want proof. 25.32 kilonewtons.
30.6. Interesting. 30.6. Okay I'll buy that.
Go for it. Break the uh break the backup.
Wow that was so cool and the dyno didn't hit the ground.
Actually that oh this shit's working. Oh my god I think this is holding it up.
What's that one read? 25.32
and 30.6. So we didn't get a higher force
but uh it definitely took a lot more pulling to break it.
Same with this side it looks like. 25.32 and a fun fact is you're still
attached to the ring. So you just tarzan into the cliff. You
get two rope slings for the price of one death. After our tests here I approve
of the idea I pulled out of my ass the other day.
Okay careful tree pro could be flying at you at any moment.
I lost my train of thought. Rope swings are safe therefore you
shouldn't highline or something like that.
So you can put a ring on the enobe split soft shackles,
pad them with velcro, stabilize them and your
at least your feather pro will break at the stitching. You get
full value out of your feather pro and if you
are getting those kinds of forces 30, 23, 30 kilonewtons
you are too heavy and you shouldn't rope swing.
Now please keep in mind that tandem rope swings can literally double if not more
your rope swing forces and when we have rope swinged in the past we've gotten
six kilonewtons at the most on the jumper on on a
single rope and the anchor had approximately six
kilonewtons. So those are safe numbers but if you add
a second person and do tandems that's literally twice the force. So
please be careful and don't ever do tandems if you
if you listen to this at all. But six kilonewtons with a 23,
24, 30 kilonewton system here is super good enough. However there are
20 ways to screw this up therefore you shouldn't
rope swing. Hey thanks for watching but don't be an
idiot and try rope swinging your first time without going with somebody who
knows what they're doing. We actually have a Highline University
International coming out soon taking you A to Z
through the process of highlining. The H0 course is how to
highline everything you need to know about highlining a line that's already
rigged. There's actually a hundred things that you need to know before you get on
a line that's already rigged. The H1 and H2 are
the beginning and advanced courses for actual rigging and then we'll do
like an R1 or whatever we want to call it
for rope swinging because rope swinging doesn't have to be that complicated
you just always want to go second. Not joking
anyways go to slackademics.com to find facebook groups of over 1300
facebook groups all over the world so you can find a slackliner near you
because you really should not go by yourself
the first time you go highlining and be sure to
follow like and subscribe our instagram facebook or and
youtube so you catch all of our stories and videos and all of our progression as
we show you what we're learning in this
sport. Cheers!
