【ろくろ】ポットの作り方 HOW TO MAKE A TEAPOT

SHINOBU HASHIMOTO
79 followers
9 Video Views·Jan 6, 2023
Hello, I'm going to show you how to make a pot.
My pot is made in different sizes and shapes, so it's completely random.
It's up to you how you want to make it.
I've decided to make the lid 6cm in size.
So I'm going to make the body of the pot 6cm in diameter.
That's the only thing I've decided.
The rest is up to you.
But once you make it, it's usually the same shape.
I'm going to stretch it out straight.
Be careful not to make the mouth too thin.
You have to make a lid here.
If you make it too thin, you won't be able to make the lid.
I'll leave it a little thick.
First, stretch it out a little longer than the size of the lid.
I'm going to make the belly bigger and leave the mouth thick.
I'm using a nozzle to measure the size of the mouth.
The nozzle is now 6cm in size.
I'm going to make the inside diameter 6cm.
It's a little big right now, so I'm going to tighten it a little.
It's easier if you put it diagonally at this time.
It's about 6cm.
When you make the mouth, use this side.
Both sides are 6cm, so when you make the lid, use this side.
You can make a 6cm lid.
It's easier if you have a sponge with a stick on it.
The thickness is almost done, so I'm going to trim the line.
You can use your hands or your hands.
It's not about making it thinner, it's about shaping it.
Once you've decided on the shape, you'll make the handle.
The 6cm is about 6cm in the middle of the cross section of the handle.
I'm going to cut the inside of this cross section in half.
Then it becomes a handle.
I often use a wooden spatula like an ice cream stick.
It's really the same as an ice cream stick.
I've cut this in half and flattened it.
This is just right.
Can you see it?
I'm going to cut off half of it.
You can make a handle.
I'll measure the size again.
It's just 6cm now.
If it's just right, the thickness of the margin...
I'm going to make a margin on this part of the handle.
There's a margin here, and there's a margin on the lid.
If it's just right, it's going to be tight.
I'm going to open it 0.xxmm outside of just right.
The handle is a little wide, so I'm going to cut this off, too.
I'll cut it off.
I'll fix it up a little bit at the end.
It's done.
If there's any extra water, I'll wipe it off.
It's done like this.
It's done.
That's all.
Next time, if I have time, I'll show you how to make a suction cup, a lid, and a teapot.
Thank you very much.
