【陶芸のヒント】片口の削り方 Pottery trimming

SHINOBU HASHIMOTO
79 followers
41 Video Views·Jan 4, 2023
Today I'm going to explain how to sharpen a Katakuchi
I'm going to show you how to sharpen a round object with a Rokuro
I often use a Shitta for Katakuchi
I often use a Shitta for Katakuchi, but sometimes I use a Beta-Oki
Today I'm going to show you how to sharpen a round object with a Shitta
As you can see, this is not a round object
I'm going to draw a circle and it's already rounded
so it's not a round anymore
I'm not just putting a mouth, I'm drawing a circle
When you make this, leave the minimum thickness as much as possible
It is important to make the upper part as thin as possible
It is difficult to sharpen the upper part, so it is important to make it as thin as possible
When you take the center, if you look at the whole, you won't know
I'm going to take the center here
It's okay
First of all, I will sharpen from the inside of the foot
Before sharpening, check the width of the bottom and sharpen according to the size of the foot
If you press it hard with your hand, you can see the dent
If you do that, the inside will be dented and it will come out
If possible, I think it would be nice if you could hit it a little and understand it by sound
Now that the bottom is decided here, I will sharpen the side of the foot to the same height as the bottom
When sharpening, use a pen as much as possible
First, sharpen with a pen
Around the foot, it is round, so I will sharpen it as usual
The problem is that it is not a circle from here to here
Sharpen with a pen in the same way
From here
In order not to lose to unevenness, it is better to receive it in front of the body as much as possible
On the contrary, I want to go along this shape, so I'm doing it sideways
I'm doing it sideways so that the speed is slow
Don't apply too much force, just rub it
If you do this, it will be sharpened along the shape
It's okay around here, so I'll do it as usual
Rub the bottom
At that time, do not hit the corner
If you go up, it's okay to go normally
I will rub the rough part with my finger
At this time, if you go down, it will slow down the rotation and rub it
Yes, it is completed
It is like this
I will cut the hard part like this
There are various shapes of hard parts, but basically the same
How about
Please look forward to the next video
