Pottery trimming 陶芸・削り方の基本

SHINOBU HASHIMOTO
79 followers
19 Video Views·Jan 6, 2023
I'm going to explain how to shave the bottom of the board.
The board I'm shaving right now is small and I don't have a platform.
So I'm going to shave it flat.
First, I'm going to explain the basics of shaving.
I'm going to show you how to do it.
I'm using a chisel.
There are many ways to do it.
You can put it on a turntable.
You can also put clay on it.
There are many ways to do it.
When you're not good at shaving,
It's not going to be flat no matter how long you wait.
It's going to be a wave.
You can also deal with that.
I'm going to explain the basics of shaving.
I'm going to put a dot on the surface.
That's the basics.
I'm going to do that.
There's less resistance.
I will scrape from the center.
I think there are various people who scrape from the outside, but if you scrape from the center, you can understand the bottom.
If you understand the bottom, and assume that you know the shape inside, the shape on the outside should be the same.
I think it's easy to understand the thickness of the whole.
First, decide the bottom.
You have to hit it and judge it by sound or feeling, but you have to get used to it.
For example, I think you have to get used to it little by little by comparing here and here.
It's a little small now, and the soil is in good condition, so I scraped it roughly.
Basically, the point against the surface should be as small as possible.
I will scrape a lot with a plane like this.
At this time, instead of pushing it, if you push it once, it is fixed there.
Then only the protruding part hits and only the protruding part is scraped.
If you keep pushing it, it will go up and down together, and no matter how much you hit it, the waves will not come off.
I scraped this with a plane now, so it's a mountain.
Then this is a point gathering.
When it becomes a point gathering, adjust it with a plane.
Then there is less resistance.
If you do this well, there will be fewer waves.
After that, fix it firmly so that it will not be brought up and down.
If it's this small, there's no problem.
If it's a big plate or something, it's a requirement that the waves will be tense.
If you put a point on the surface, it will be scraped well.
I haven't put a point on this at all.
The soil is in good condition now, and it's small in size, so it will disappear like this.
If the soil is in poor condition, be sure to put a point on it.
For example, this is also a point gathering, so adjust it with a plane.
This is also the same.
Next is the size.
This is a little bumpy.
This is in good condition now, so I can do anything.
If it's a little hard or bumpy, it's a tough time.
From my point of view, for example, around 9 o'clock,
If you scrape it here,
People's hands are weak to this kind of force.
No matter how hard you try to hold on, if you bring it like this, it will go.
On the other hand, the pressure from the front is strong.
Even if you press it like this, it will be stepped on.
So if you scrape it here, you may pick up this bumpy soil and shake your hands.
So I don't want to shake it in front of me as much as possible.
If you want to fix it firmly, turn it in the direction of your 6 o'clock as much as possible.
It's spinning here.
It's not pushing, it's fixed there.
Then only the protruding part will hit.
If only the protruding part disappears, it's basically scraping.
It's not scraping to make the whole thin.
So, as much as possible, turn it in the direction of your 6 o'clock as much as possible.
On the contrary,
I don't know what's the opposite.
For example, if you scrape something that's not straight, like a tier drop,
I dare to scrape it at 9 o'clock or in this direction.
Then your hands will be taken along with the shape.
It's spinning.
Even if it's not a straight line, you can scrape it.
If you want to scrape a straight line, turn it in the direction of your 6 o'clock as much as possible.
Then you can win the pressure from this side.
In some cases, you can scrape the side like this.
But I've never done this without scraping the side.
It's a good idea to make it thin at the time of making.
This is my way of scraping this bowl.
It's a personal problem.
I've never done it.
It's like this.
And finally, I'm going to trim it.
If you can't trim it with your fingers, use a spatula.
I use a guitar pick.
Anything is fine.
I think anything is fine with a wooden spatula.
And then...
As I said, the basics are...
The surface is the point.
The point is the surface.
I think it's a good idea to do that.
That's all.
