I layer fiberglass tape for this bow backing....and I think this one is going to work out! This bow backing should not work out according to what I have been taught But now it is time to break the rules and find new boundaries!!!.
Welcome back to the workshop. How are you guys doing today? Today we are taking the second bow
that I ever made, which is rubbish by the way, and we're going to turn it into a powerful,
reflexed, sinewed back weapon. The reason that this bow is not very good is because there is
a crack in the back of the lin and as you saw, I tried to repair it with no success,
but I did not draw the bow back all the way to where it would break completely. So
I am thinking that if we sinew back the back of this bow, then where the crack is will become
the middle where there is very little to no stress on that part of the lin and we may just get
an awesome bow out of this. Another interesting fact about this bow is how many knots are on it
and what's interesting also is that the side with all the knots is not the side that cracked,
but the side that cracked was the side with no knots. Our first steps for this bow is going to
be reshaping the limbs. We're going to take it down quite a bit, make it a lot shorter of a bow
and get it to the shape that I want and then we're going to reflex the limbs, then we're going to
sinew back it, then retailor it, then do final touching and we're going to make this piece of
junk, this piece of Osage that I stained into something more beautiful than it is now and we're
going to make it a lot more functional than it is now. Let's get right into it and let's not waste
any time and let's have some fun. You know this is what it's all about, using the absolute
necessities when making bows.
So change of plans time. I started bending the limb and this wood is as brittle as I'll get
out. It started cracking just by bending it that much and it was plenty hot. I know I wasn't forcing
it at all, so we're going to experiment with this bow instead of recurving and making the awesome
weapon we would want it to, but we're going to make that awesome weapon with a different piece
of wood, but for the rest of this video I'm going to experiment with this. We might try a cool
backing. I'm going to just reflex that side now and we're going to have fun doing it. We're going
to try to learn something, so let's continue. Okay we've almost got this too hot enough to be able
to bend it and it's been a really good challenge for me to use all of these old first bows I made
and try to make them into something that works. It's actually more challenging than it is to even
start with a brand new stave because you're having mess-ups and flaws in my case to work around.
So when it's almost too hot to the touch you should be good, so let's go over and
bend it now and we're just trying to match the reflex on the other limb.
About right there should be good and then once this cools off here we're going to profile the
limbs up to the way we like it and then we're going to put a cool backing on it.
Kramer what are you thinking? Did you not just build a bow with fiberglass tape on the back of
it and break it? Yeah I did. I did just build a bow with fiberglass on the back of it and break it
but you know what? Let me tell you what I'm thinking. I'm thinking that this bow that I
made that broke has two layers of fiberglass tape and this bow has seven layers of fiberglass tape.
My idea is that by adding more layers of this drywall fiberglass tape it'll turn this bow
backing from a soft backing to like a hard backing and actually provide some mass. So when you look
at this bow you can see there's a thick layer of fiberglass tape because I added seven layers. Now
this may not work and that's why I'm experimenting with this but I really think we might get a good
result by adding so many layers of fiberglass tape hopefully almost like adding a whole strip
of fiberglass because that's basically what it is. I might be crazy well in fact I know I am in some
areas but but I think I think I might be able to get away with this one and if I can try this then
you guys don't have to and so we're going to experiment with this see if this sucker will
work out for me. We're going to experiment with this and act like the fiberglass tape was like
sinew we're going to see how strong this stuff actually is especially when you add more layers
on because this stuff is really cheap to get so if this works out it's going to be super cool
because we're going to have a new bow backing that we can use in so many different situations.
All in all I'm excited to see how this bow turns out but that's going to be it for today if you
want to see how this one turns out you're going to have to come back Sunday we're going to finish
this bow on Sunday and then we've got some really really cool stuff coming up
uh another collaboration so I hope you guys are ready for this one it's an awesome one
but for today that's going to be it so thank you for joining me and enjoy the rest of your day